Clean Air Systems Equipment For Air And Climate Available In Rhode Island
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Thermal Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs), and odorous emissions discharged from various industrial processes using thermal oxidation and heat recovery. Anguil’s thermal recuperative oxidizers incorporate flexible heat exchanger arrangements, from cleanable tubes ideal for applications with particulates, to shell ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a compact, economical solution to air and compressed air flow metering. It is the first, and currently only, thermal mass flow meter to meet SIL 2. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable linearized 4-20 mA output of flow rate. Additionally, for applications benefiting from a high or low flow alarm point, the ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The BEAM 1.1 performs in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 1.1 guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)). The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Designed to enhance fixed Airborne Molecular Contamination (AMC) monitoring programs, the AirSentry II Mobile AMC Detection System is the first truly mobile system for monitoring airborne molecular contamination in cleanrooms. Mobility plays an important part in a strategic airborne molecular contamination monitoring program, allowing contamination sources to be quickly located, quantified and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 7000 Zero Air Generator is an ultra high purity air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air. The ZAG is a powerful stand-alone unit, so there is no need for you to worry about an external compressed air supply or dangerous and expensive gas ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
18 fan models suitable for clean air and gas maybe containing dry non-abrasive dust. Backward curved blades. Capacity up to 350.000 m3/h. Pressure up to 550 mm c.a. Impeller diameter up to 2500 mm. Max efficiency ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
20 fan models suitable for clean or slightly dusty air and gas. Backward curved blades. Capacity up to 190.000 m3/h. Pressure up to 570 mm c.a. Impeller diameter up to 2500 mm. Max efficiency ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Z5 zero air generator perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments Z5s guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)).The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
For indoor applications, the MerPAS® sampler is deployed without the protective jar housing regardless of Hg air concentration since the sample does not need protection from the elements. Mounting stands may be purchased from Tekran if needed. Sample time is determined by monitoring goals and expected air Hg levels. The yellow body diffusive barrier is used due to better performance at low ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The Standard CEMS is a low cost emissions monitoring package designed to operate in a general purpose, environmentally controlled shelter or cabinet. The targeted markets are NOX reduction sites at Refining, Hydrocarbon Processing and Chemical Plants. The standard monitoring requirements are based on the US EPA 1990 Clean Air Act as detailed in 40 CFR-Part 60, as well as local and state ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The instrument uses a 6-port valve with a single sorbent trap, and a metallic capillary column. It has a minimum detection level as low as 15 ppt (for 1,3-Butadiene for e.g.) in ambient air, and analyses up to 32 compounds during a single ...
-
Premiumbased in USA
The FEM-capable Ozone Module helps you confirm ozone attainment. The Clarity Ozone Module is based on best-in-class technology from 2B Technologies, and provides accurate measurements of ozone in air over a wide dynamic range extending from a few parts-per-billion by volume (ppb) to an upper limit of 100 parts-per-million (ppm) based on the well-established technique of absorption of ultraviolet ...
-
PremiumManufactured by Emcel Filters Limitedbased in UNITED KINGDOM
For the removal of Tobacco smoke and associated odours. The EMCEL Tobacco Smoke Filter Unit has been specifically designed and developed to alleviate the problems found in designated smoking areas where the smoke, nicotine and odours are concentrated in confined ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Ideally suited for aseptic environments, the MiniCapt Remote Microbial Air Sampler simplifies the job of microbial air sampling by applying modern data management capabilities that save time and reduce operator error in air sampling data. The MiniCapt Viable Microbial Sampler uses a unique HEPA-filtered exhaust so it doesn’t contaminate the cleanroom. With a small footprint, the MiniCapt ...
-
PremiumManufactured by WTW - a xylem brandbased in GERMANY
The IQ SENSOR NET is of modular design and grows with your ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
20 fan models suitable for clean or slightly dusty air and gas. Backward curved blades. Capacity up to 120.000 m3/h. Pressure up to 740 mm c.a. Impeller diameter up to 2500 mm. Max efficiency ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
The Synspec Cooled Sample Conditioning Unit (Cooled-SCU) is developed for the effective removal of high concentrations of humidity from your sample gas. Heart of the instrument is a cooled loop that removes the humid from the sample gas. All internal tubing of the Cooled-SCU is made of inert materials, making this Cooled-SCU in particular suitable for the analysis of sulphur containing components ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GSP-200 high temperature sampling probe is an unique design product for the flue gas containing high dust and NH3HSO4 at temperatures below 190?crystalline solid cause clogging of piping in the field of escaping ammonia. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Z4 zero air generator perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments Z4s guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)). The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you