Cleanrooms Applications available in Asia & Middle East
-
Premium
Monitors, gas analyzers solutions for ISO 22716 solutions for cosmetics & personal care
Providing you with a complete spectrum of contamination monitoring solutions. The Cosmetics and Personal Care manufacturing industry is required to meet ISO 22716:2007 and worldwide GMP Standards for hygienic production and contamination control. This includes monitoring viable and non viable contamination that could impact the safety and quality of your products. Particle Measuring Systems brings in-depth knowledge of manufacturing processes and regulatory codes, such as ISO 22716, to Cosmetics and Personal Care ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Cleanroom Solutions from Concept Smoke Systems
The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the cleanroom environment that is being served. Testing is necessary since HEPA filters can ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Gas analyzers for clean air room monitoring
The ambient air in clean air rooms needs to be constantly monitored for the safety of workers and of the production according to the environment. A clean air room is a room where the concentration of particles is controlled in order to minimize the introduction, the generation, retention of particles inside, for instance for chip production or the production of ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Rapid analysis of total mercury in waste waters and process waters with elevated mercury content using direct pyrolysis technique
Introduction A conventional standard method of total mercury det ermination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that ta kes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct dete rmination of mercury in process and waste waters contaminated with mercury without digesti on or any other sample ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Direct atomic absorption mercury determination in tissues and biological samples
INTRODUCTION Mercury and its compounds are highly toxic substances fo r humans. It occurs naturally and exists in various forms: elemental (or metallic); inorganic (e.g. mercuric chloride); and organic (e.g., methyl- and ethylmercury). These forms all have different toxicities and implications for health. Among naturally occurring mercury compounds, methylme rcury exerts a significant influence (neurotoxic action) on human ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Carbon technology solutions for metals processing industry
Pyroid Pyrolytic Graphite for Closed Die Forging. Sophisticated forging operations are constantly striving for nearer-net-shape forgings that reduce the amount of material necessary to produce a part as well as to reduce any subsequent machining required to get the part to the final form. A reduction in machining requirements reduces materials waste and improves throughput. Most forge operations perform optimally when both die and piece are the same temperature throughout the forging process. Best operations occur ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Chemiluminescense based analyzer for environmental, ambient Air and research sector
Focuses on low NOX and NOX-related concentrations up to 100 ppm where high resolution is required. Parameters included are NO, NO2, NOX, NH3, NOX-Amines and NOY. Target applications are ambient air monitoring, indoor measurement, clean room measurement and atmospheric ...
By ECO Physics AG based in Duernten, SWITZERLAND.
-
Premium
Monitors, gas analyzers solutions for semiconductor / microelectronics sector
Particle Measuring Systems (PMS) has the application expertise and particle monitoring instruments with the industry leading sensitivity you need to reduce yield loss. Particle Measuring Systems PMS can provide you with particle monitoring solutions to determine how clean your semiconductor or microelectronics manufacturing is. By continuously counting particles when and where products (water, chemicals, air) are at risk, we provide the global expertise and high-performance laser particle counters you count ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Environmental Data Monitoring Solutions for Controlled Atmosphere
To reduce the introduction, generation and retention of particles in cleanrooms, particle concentration controls are set ...
By Ecomesure based in Saclay, FRANCE.
-
Premium
Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
ISO 14644-1:2015 continues to pose challenges to cleanroom managers and manufacturers. Here we provide several sources of information to help everyone from those new to this ISO regulation to veterans in the field. Our team of regulatory experts have put together a package of information so you can easily understand the requirements and what you need to do to meet them. Get a summary of ISO 14644-1:2015 by reading the paper below or watching the recorded webinar at the right. We also have FAQs and a paper to learn ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Smoke generator device for clean room solutions
The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the clean room environment that is being served. Testing is necessary since HEPA filters ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Monitors, gas analyzers solutions for understanding ISO 21501-4
Determination of particle size distribution—Single particle light interaction methods. ISO 14644-1:2015 introduces the need for particle counters calibrated to ISO 21501-4. The calibration methods assure data accuracy and repeatability. The methods outlined in ISO 14644 and ISO 21501-4 represent an important step in more accurate evaluations of clean room contamination and improved process control. ISO 21501, Determination of particle size distribution—Single particle light interaction methods, ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Monitors, gas analyzers solutions for pharmaceuticals / life sciences sector
The Only Complete Pharmaceutical Industry Contamination Control Provider. Particle Measuring Systems partners with industry companies as a complete contamination monitoring solutions provider. Starting with our Advisory Services team, then collecting data with our viable and non viable particle counters, thru to complete data management and reporting. We have the expertise to help you meet regulatory requirements including ISO 14644-1:2015 and EU GMP Annex 1 and get your product to ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
PVC Liner Panel for Indoor Cannabis Grow
Octaform is a manufacturer of a PVC liner panel that will ensure the facility will perform well and meet all compliance requirements / GMP considerations. PVC is essential as it has been proven in cannabis production, pharmaceutical and even surgical facilities because it has the lowest propensity to accumulate molds and other pathogens. In cannabis, it has the added benefit of offering high reflectivity which maximizes the power of the grow ...
By Octaform Systems Inc. based in Vancouver, BRITISH COLUMBIA (CANADA).
-
Premium
Blowers, compressors and gas meters for vacuum technology
Whether in foodstuff or pharmaceutical industry, in the chemistry or process engineering, metall processing or in automotive industry: in many branches of industry most different manufacturing processes require gas conditions with a pressure considerably below atmospheric pressure. A pressure of -700 mbar (300 mbar abs.) is considered as negative pressure. Below 300 mbar absolute the vacuum range begins, subdivided in rough, fine, high and ultra high ...
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
-
Environmental Service Worker II – FT Geauga
Environmental Service Worker II – FT Geauga Position: Ability to clean patients rooms, public spaces and the collection of trash and bio hazardous material. Familiar with using: Vacuum, wide vacuum, mop, wringer, burnisher, ladder, extractor. ...
By Symphony Talent, LLC based in New York, NEW YORK (USA).
-
Self-contained & remote packaged cooling systems for aerospace applications
In aerospace environmental control, failure is not an option. Whether you are preparing to send payloads into space, testing ballistic missile systems, calibrating equipment in very precise conditions, or working in other areas of aerospace and defense systems, you can be confident knowing your environmental control units will be developed to precise aerospace specifications and with decades of ...
By Air Innovations based in North Syracuse, NEW YORK (USA).
-
Geared, gearless and multistage turbo blowers solutions for vacuum and pneumatic conveying industry
Vacuum and Pneumatic Conveying for any application. Plus the ability to offer the correct designed pressures and flow every time. Lone Star offers industrial conveying and vacuum systems for a wide variety of manufacturing processes. Before selecting your blower package, our system designers carefully calculate the required performance of each blower and how it and the selected control system will respond to your specific application. Requirements such as food grade materials, low discharge temperature, mitigating ...
By Lone Star Blower, Inc. based in Houston, TEXAS (USA).
-
Gas sensors for original equipment manufacturers (OEMs)
Our leading PID gas sensors are recognised around the world by original equipment manufacturers for their longevity and critically their resistance to ...
By ION Science Ltd. based in Royston, UNITED KINGDOM.
-
Air filtration solutions & corrosion monitors for semiconductor manufacturing facility
What is the broadest benefit of information technology? It empowers us every day. We can be creative. We can be productive. We can learn new things. It is exciting for Purafil to support technological manufacturing: assessing the environment, controlling contamination, and monitoring to verify system ...
By Purafil, Inc. - Filtration Group based in Doraville, GEORGIA (US) (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you