Combustion Air Equipment For Air And Climate Available In Bolivia
-
ShowcaseManufactured by FPZ S.p.A.based in ITALY
The side channel single-impeller and single-stage (MS) blowers represent one of the main FPZ product ranges. A point of reference in many fields of application, the MS blowers are characterized by a compact design that allows a higher installation flexibility compared to other product ...
-
PremiumManufactured by Testo, Inc.based in USA
The rugged testo 350 portable gas analyzer is ideal for a wide range of professional industrial emission measurements and analysis applications, and is excellently suited for complex data compilation using TECsoft emission compliance ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Ideal for monitoring levels of artificial Concept smoke and particulate levels in the exhaust gas of industrial combustion or air filtration processes. The CEL-046 is an optical instrument designed to measure the concentration of particulate matter in an exhaust gas passing through a duct, stack or flue; typically the exhaust gas from an industrial combustion process or air filtration ...
-
PremiumManufactured by Testo, Inc.based in USA
Does a sizeable part of the work you do have something to do with refrigerant systems or heat pumps? Then here’s one tool you can’t afford to be without: the testo 550-2 digital manifold ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
With the effective recovery of flue gas heat, you can save up to 14% on fuel and, at the same time, reduce emissions. - Effective heat recovery and reduction of flue gas losses - Maximum efficiency gain when using condensing technology - Fuel savings of up to 7%, or up to 14% when using an additional downstream condensing heat exchanger - Intelligent control for a long service life and high level ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-700 FID is designed to be installed directly upstream of a FTIR analyzer (e.g. Gasmet) to continuously measure the total concentration of hydrocarbons within a gaseous sample. All controls which allow to calibrate the FTIR or FID individually are built in. Sources can be ambient air, exhaust gases from a combustion process e.g. stack emissions, ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
Measures CO2 + HC/CH4 with NDIR ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
An advanced carbon monoxide detector designed to provide early warning of spontaneous combustion in coal and biomass storage ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A portable monitoring device using conductive cell technology for accurate, periodic measurements of the Acid Dewpoint Temperature (ADT) in combustion processes. Designed specifically to provide the unique but vital measurement of sulphuric acid dewpoint temperature, the portable Lancom 200 supports boiler efficiency checks, corrosion protection and the management of high-cost fuel ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks, industrial chimneys, and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe/duct applications are difficult for ordinary flow meters because of distorted flow profiles and lack of straight-run that can lead to inaccurate and ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-600 FID is another low cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 7000 Zero Air Generator is an ultra high purity air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air. The ZAG is a powerful stand-alone unit, so there is no need for you to worry about an external compressed air supply or dangerous and expensive gas ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our model VE7 heated FID is being manufactured since 1974 and is the first heated THC analyzer ever built with a permanent back purge sample filter. It is still the most liked heated FID throughout the stack testing community due to its legendary ruggedness, forgivingness and long standing accuracy and sensitivity. The VE7 belongs to the very first total hydrocarbon analyzers being officially ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-500 FID is our lowest cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M 3-800 Portable Heated Total Hydrocarbon Analyzer is a heavy duty FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The 3-800 ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our transportable model 3-200 fully heated FID is successfully used throughout international markets for over 30 years. Also among other portable gas FIDs, the 3-200 It is the first ever built transportable fully heated FID using our proprietary back purge sample filter. It is widely distributed throughout the industry and the stack testing community and is much liked for its ruggedness, high ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The 3-300A heated FID was designed in the early 80's as a space saving alternative to our VE7. Also the 3-300A was a "first" in the industry due to its sample filter back purge feature. It is also a very much liked 19" rack mount heated FID throughout the stack testing community and well known for its ruggedness, forgivingness and long standing accuracy and sensitivity. The 3-300A is fully ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M W600 Heated Total Hydrocarbon Analyzer is a very compact wall or panel mount heated FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M 3-900 Portable Heated Methane Only and Total Hydrocarbon Analyzer is a heavy duty FID analyzer to continuously measure methane only or the total hydrocarbons to determine the non methane hydrocarbon concentration within a gaseous sample . This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you