Combustion Emissions Equipment For Air And Climate Available In Bhutan
-
ShowcaseManufactured by Testo, Inc.based in USA
Measurement accuracy, configurable measurement display, parallel measurement options, intuitive operation, sturdy housing, connection option to the testo Smart App: Our flue gas analyzer testo 310 II offers everything that heating fitters and technicians need for practical work on heating ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The PEMS-1000 portable On-board Emission Test System is a kind of portable analysis device used for real-time detection of vehicle engine exhaust, measuring related technical requirements for exhaust emission test of light-duty vehicles, heavy-duty vehicles and non-road machinery. The system, adopting integrated design to install on the measured vehicle, consists of gas measurement unit, exhaust ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 316-3 is our best refrigerant leak detector yet, and delivers dependable, rugged performance at a great value. The heated diode sensor provides sensitivity down to 0.15 ounces/year including the new refrigerant blends like R-410A, R-407C, and R134-a, allowing you to quickly locate refrigerant leaks. Just turn it on and start getting readings immediately. Thanks to automatic zeroing, the ...
-
PremiumManufactured by Testo, Inc.based in USA
The constantly rising number of solid fuel systems is leading to an increase in the emission of particulate matter. The revised version of the 1st German Federal Emission Control Ordinance (BImSchV) presents new challenges for flue gas inspectors, heating engineers, and service engineers, when it comes to particulate matter ...
-
PremiumManufactured by Testo, Inc.based in USA
With its ability to perform both basic and more complex combustion analysis, maintenance, safety checks, and boiler efficiency confirmations, the fully featured testo 310 residential combustion analyzer is ready to provide accurate analysis. The stainless steel probe and cone-stop are perfect for residential and boiler efficiency applications. Simple top-of-display icons show you the current ...
-
PremiumManufactured by Testo, Inc.based in USA
When house owners notify the network operator or fitter that they can clearly smell gas in the house, a highly explosive gas concentration may already be present (4–17%). The fitter has to use a gas detector to check sections of gas pipes for leak tightness to locate possible ...
-
PremiumManufactured by ENVEAbased in FRANCE
Exists in single or dual stream version and “Ultra Low” version for low CO concentration measurements (0-10 to 0-50 ppm) Installed downstream a chiller, controlled at ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples without the need to cool the sample, which makes the ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Ideal for monitoring levels of artificial Concept smoke and particulate levels in the exhaust gas of industrial combustion or air filtration processes. The CEL-046 is an optical instrument designed to measure the concentration of particulate matter in an exhaust gas passing through a duct, stack or flue; typically the exhaust gas from an industrial combustion process or air filtration ...
-
PremiumManufactured by Testo, Inc.based in USA
Hairline cracks in pipes, old and worn out gaskets. Even the tiniest of gas leaks in a natural gas pipe can cause enormous problems. The new testo 316-1 leak detector will help you pinpoint the exact position of a leak when the leak has already been detected using a leak measuring device, for ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The ATP-300B is a compact, lightweight and integrated high performance infrared spectrometer based on Fourier transform technology. The product consists of a light source, interferometer and detector. The spectrometer adopts a double hollow corner reflector with double pendulum design,which has the advantages of permanent alignment, good anti-vibration and anti-thermal effect; The detector is an ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The CEL-022 is an optical instrument designed to measure the visible opacity (0-100%) of exhaust gas in a duct, stack, or flue; typically the exhaust gas from an industrial combustion process or air filtration system. The CEL-022 is available with or without an Operator Interface (control unit), so for the most cost effective monitoring solution the CEL-022 can operate as a ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
The In-Situ TDLS gas analyzer has been designed for meeting the requirements of a large range of CEMS and Process applications. LAS 5000XD uses Tunable Diode Laser Spectroscopy (TDLS) and comes in various models for measuring parameters such as NH3 + H2O, HF, CO + CO2, O2, HCl + H2O, ...
-
PremiumManufactured by ENVEAbased in FRANCE
Eco-designed, ultra-compact, smart & connected instrument, the MIR 9000e is your next tool to measure combustion exhaust gas from boiler, or gas from different industrial furnaces and process applications. It offers superior metrological performances for the simultaneous multi-gas measurement of: NOx, SO2, CO, O2, residual H2O, CO2, CH4 and N2O (greenhouse gases). ...
-
PremiumManufactured by Testo, Inc.based in USA
The number of solid fuel burning systems, and the fine particles they emit, has continued to soar over the past years. This, and the amendment of 1. BlmSchV, has presented chimney sweeps, heating engineers, and service technicians with a new and formidable challenge. The testo 380 fine particle analyzer is designed to aid these professionals in performing easy and precise fine particle ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 310 II has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. In addition, the measuring ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
LSS2004 is a laser-based backscatter particulate monitor that is designed to measure dust loading of combustion exhaust gas stream. The electrical output from the LSS2004 is proportional to the light scatted back from the particles in the gas stream .The high stable laser signal source projected into the gas flue and those particles can reflect the light whose intensity is proportional to the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you