Combustion Monitoring Equipment For Air And Climate In Finland
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples without the need to cool the sample, which makes the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Solid Autosampler CIC (TEI) is used for automated analysis of solid samples using Combustion IC. It can be used in combination with the Boat Introduction Modules (6.07311.010 or 6.07311.020). The sample rack for solids no. 1 (6.07312.010) and a cover for the sample rack are already ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The GLS Sampler CIC (TEI) is used to analyze liquid gas or gases under increased pressure using Combustion IC. It can be used in combination with either the manual or the automated Liquid Introduction Module for the Combustion Oven ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Combustion Oven (AJ) is part of the Metrohm Combustion IC system. It is part of the two Combustion Modules 2.136.0700 and ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A portable monitoring device using conductive cell technology for accurate, periodic measurements of the Acid Dewpoint Temperature (ADT) in combustion processes. Designed specifically to provide the unique but vital measurement of sulphuric acid dewpoint temperature, the portable Lancom 200 supports boiler efficiency checks, corrosion protection and the management of high-cost fuel ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrohm Combustion IC Manual - Quartz package enables the analysis of halogens and sulfur in flammable samples of all types using inline combustion digestion (pyrohydrolysis) with subsequent ion chromatography determination (Combustion IC). It comprises all required components, such as the Combustion Oven (TEI) from Trace Elemental Instruments (2.0136.0600), the quartz combustion tube ...
-
Manufactured by PID Analyzers, LLCbased in USA
The Model 301-C PGCs are flexible and versatile Analyzers that are in their fourth generation. The addition of these new Analyzers greatly improves the capability and range of Process Analyzers from ...
-
Manufactured by Detector Oybased in FINLAND
The Riken Keiki GX-3R is the smallest and lightest 4 Gas Confined Space monitor available on the market. GX-3R monitors oxygen, combustible gases and two toxic gases (carbon monoxide and hydrogen sulphide).The durable, lightweight monitor has a long service life and is conveniently portable, thus ensuring employee safety. A cradle charger, battery-operated pump unit and calibration station are ...
-
Manufactured by Detector Oybased in FINLAND
The DGTk2 is designed to measure and monitor combustible gases. The detector can be used to measure a wide range of gases. The detector is easy to install and connect to existing automation solutions. It is also compatible with other ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Laboratory-precise five components gas analysis, anywhere according to DIN EN 15267 - 3, DIN EN 14181. Approved as Standard Reference Method (SRM) for: CO (DIN EN 15058). O2 (DIN EN 14789). NOx (DIN EN ...
-
Manufactured by PID Analyzers, LLCbased in USA
The Model 322 provides analytical capabilities unmatched by any other compact GC. The Model 322 dual-detector capability combined with its isothermal or temperature programmed oven, choice of injectors, and the ability to accommodate packed or capillary columns provides exceptional stability and flexibility for a wide range of environmental, laboratory, and mobile lab ...
-
Manufactured by Freudenberg Filtration Technologiesbased in GERMANY
Combustion engines need clean air to maintain high performance. However, the ambient air in traffic situations contains many contaminants of natural (pollen, dust, sand, etc.) and industrial (soot, wear particles, emissions, etc.) origins. These can impair the combustion process and the sensor systems, leading to engine ...
-
Manufactured by Detector Oybased in FINLAND
The DGTkex is suitable for use in hazardous areas for the measurement and monitoring of combustible gases and solvent vapours. The detector can be used to measure a wide range of gases. The detector is easy to install and connect to existing automation solutions. It is also compatible with other ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The HORIBA SMA-371 data logger can be used both, in the online and in the offline operating mode. In the online operating mode you attach the data logger directly to the serial interface of the PC. In this case only instantaneous values are processed. On the basis of the instantaneous values the further processing takes place in EDA-2000. If only the measuring data from a HORIBA PG-250 and no ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The Synapse-i scientific CCD camera is the most sensitive quantitative low light imaging camera on the market. The Synapse-i imaging camera provides real image quantification for direct correlation between the image intensity and the detected number of photons. The importance of the quantitative nature of the Synapse-i imaging camera cannot be overstated especially for imaging of labeled cells, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you