Combustion Monitoring Equipment For Air And Climate
-
PremiumManufactured by Testo, Inc.based in USA
Does a sizeable part of the work you do have something to do with refrigerant systems or heat pumps? Then here’s one tool you can’t afford to be without: the testo 550-2 digital manifold ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Impac 140/39 allows you to measure temperature through flames and combustion as well as penetrate glass. 3.9 µm spectral range, Focusable optics, Small spot sizes, Short response times, Built-in digital display, Precision mounting ...
-
PremiumManufactured by ENVEAbased in FRANCE
A complete “all in one compact” system, for multi-gas measurements, based on the field-proven MIR 9000 analyzer and on-board SEC sampling ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A compact, reliable multi-gas analyser for measuring flue gas emissions in processes burning natural gas and biomass. The FGA provides accurate, reliable measurement of carbon monoxide, nitric oxide and oxygen in flue gases. It is an integrated solution for Continuous Emissions Monitoring Systems (CEMS) applications in smaller combustion ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The laser scans single absorption lines where there is no ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Designed for the detection of explosive gases, toxic gases or oxygen, this gas detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application Teledyne Gas and Flame Detection offers a solution: catalytic, electrochemical, semiconductor, or poison control version. ATEX approved, these detectors are available in explosion safe or intrinsically safe ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 930 Combustion IC PP (AJ) enables the analysis of halogens and sulfur in flammable samples of all types using inline combustion digestion (pyrohydrolysis) with subsequent ion chromatography determination (Combustion IC). It comprises all required components, e.g., the Combustion Module from Analytik Jena (2.136.0700), the 920 Absorber Module, the 930 Compact IC Flex Oven/SeS/PP/Deg, ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Interfacing Metrohm ion chromatographs with sophisticated sampling systems on the one hand (PILS, MARGA, and CIC) and/or universal, highly sensitive detection systems (IC-MS, IC-ICP/MS) on the other greatly extends the scope of ion ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Digital combustible detector for oxygen, toxic gases or combustible. The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Intended for use in combination with the MX 16, MX 32 and MX 43 controller, the OLCT 10N provides a fast and accurate response. All transmitter information is received by the controller in less than 1 second. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrohm Combustion IC Manual - Quartz package enables the analysis of halogens and sulfur in flammable samples of all types using inline combustion digestion (pyrohydrolysis) with subsequent ion chromatography determination (Combustion IC). It comprises all required components, such as the Combustion Oven (TEI) from Trace Elemental Instruments (2.0136.0600), the quartz combustion tube ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A portable monitoring device using conductive cell technology for accurate, periodic measurements of the Acid Dewpoint Temperature (ADT) in combustion processes. Designed specifically to provide the unique but vital measurement of sulphuric acid dewpoint temperature, the portable Lancom 200 supports boiler efficiency checks, corrosion protection and the management of high-cost fuel ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The GLS Sampler CIC (TEI) is used to analyze liquid gas or gases under increased pressure using Combustion IC. It can be used in combination with either the manual or the automated Liquid Introduction Module for the Combustion Oven ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Combustion Module (Oven + ABD ) enables sample digestion during pyrolysis and oxidation of all types of flammable samples. The Combustion Module is comprised of the combustion oven and the Auto Boat Driver (automatic sample introduction). Both are products made by Analytik Jena which have been optimized specially for coupling with ion ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Andros 6511 gas analyzer offers unparalleled accuracy and performance. It’s designed to meet and exceed performance requirements for portable or fixed leak detectors of toxics or combustibles. Superior performance and reliability. Enhanced optics and electronics. Highly accurate calibration. Extensive software architecture. Rapid ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Solid Autosampler CIC (TEI) is used for automated analysis of solid samples using Combustion IC. It can be used in combination with the Boat Introduction Modules (6.07311.010 or 6.07311.020). The sample rack for solids no. 1 (6.07312.010) and a cover for the sample rack are already ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 1400C is a portable Flue Gas Analyzer for commercial and industrial applications.The rugged combustion analyzer can be equipped with up to 4 sensors. Its basic unit has an O2 (Oxygen) and a CO (Carbon Monoxide) sensor. The other two sensors are customer selectable as well as the measuring ranges.The IMR 1400C measures and calculates all the needed parameters to perform a thorough ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
We can provide a range of accredited, portable or continuous emissions monitoring systems which satisfy both operator and regulatory requirements including the waste incineration directive (WID), large combustion plant directive (LCPD) and the newer industrial emissions directive (IED). These systems are currently operational in a number of key industries including hazardous, clinical, and animal ...
-
PremiumManufactured by ENVEAbased in FRANCE
Single reaction chamber version for the monitoring of NO or NOx, or dual chamber for NO, NOx and NO2 measurements. Exist in 2 different versions: TOPAZE 52M-S : NO or NOx monitoring. TOPAZE 52M-D : NO-NOx and NO2 simultaneous ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Whether you need an infrared or catalytic bead sensor to detect combustible gases or an electrochemical sensor for a toxic environment, the Meridian universal gas detector utilizes a single detector head to easily accept all sensor types. There is no requirement for distinct personality boards in the gas detector or different detector heads to make the instrument behave as a combustible or toxic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you