Air And Climate Original Equipment Manufacturers Near Nebraska
-
Original equipment manufacturer (OEM)based in Humboldt, IOWA (USA)
Inferno Cabs Heaters is an OEM and Aftermarket Manufacturer of Cab Heaters for use in a wide range of applications. We take pride in producing top-quality products that we manufacture right here in the USA. All of our cab heaters come equipped with ...
Inferno Slim - Cab Heater
Inferno Slim Series Cab Heater with (2) 2.5″ Ports. The Inferno Slim Series is the thinest heater in our OEM line of cab heaters at a height of only 5.5 inches. Made for tight fitting spaces this thin-line heater still packs a punch boasting ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Overland Park, KANSAS (USA)
IAC is a fully integrated EPC Contractor & OEM of air pollution control (APC) systems, pneumatic conveying systems, bulk storage and dry material handling systems, rotary dryers, automated controls, and dry sorbent injection systems. The company was ...
IAC - Pleated Filter Element Area and Media
The IAC pleated filter is a one-piece element, usually made of spun-bond polyester media. Because spun-bond material is pleatable, we can get 200 – 300% more filter media into a pleated filter that is the same size, or usually smaller than, ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Detroit, MICHIGAN (USA)
We are a third generation company established in 1941 as 'Aime Savard & Sons', installing roof vents in homes out of a Chevy panel van. Now we are a full fabrication and installation company with a 20,000 square foot manufacturing facility. We are a ...
SSM Industries - Industrial Filter Housings
SSM-Industries, LLC are manufacturers of a variety of quality industrial filter houses. Our filter houses are being used in a variety of manufacturing & industrial applications. Our engineering department continually strives to improve through ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Forestburg, ALBERTA (CANADA)
Prism is an oilfield equipment manufacturing company that manufactures and services a wide variety of products used in all steps of the production process. Prism is a company that prides itself on being a step ahead and being located in Canada has ...
Model EPR - Tank Vents
The EPR vent is designed to accommodate emergency relief flow in abnormal operating conditions, such as a fire, in which the normal operating relief vent can’t provide sufficient flow to relieve the tank. We stand by quality and reliability in ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)Distributor in PENNSYLVANIA (USA)
KX Technologies is a renowned leader in the field of water filtration solutions, offering a wide range of innovative products and technologies to Original Equipment Manufacturers. With a strong commitment to providing clean, safe, and great-tasting ...
KX Technologies - Activated Carbon Filtration
We operate one of the world’s largest solid-state extrusion facilities for the production of activated carbon filters. Our facility is equipped to offer a wide range of standard and custom diameters, with lengths available to fit almost any ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Butner, NORTH CAROLINA (USA)
PRM is an Original Equipment Manufacturer (OEM) of Pollution Control and other equipment, mainly focused on the Remediation and Landfill Industries. Our experience and talent are well diversified. PRM does not practice engineering. PRMs client base ...
PRM - Blowers
PRM carries the best blowers in the business using major manufacturers. Bare blower units are available or contact PRM about different blower packages. PRM supplies blowers from all major manufacturers: Eurus Blowers, Roots, Gardner-Denver, ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Englewood Cliffs, NEW JERSEY (USA)
Vectornate is a market leader for the manufacture and distribution of water filters and related appliances, air filtration products and vector control products. Founded in South Korea in 1991, our company strives to ceaselessly develop technologies ...
Refrigerator Filter
Do you know refrigerator filters should be checked and replaced periodically? Try Vectornate refrigerator filters. We provide a wide range of compatible refrigerator filters in the global market today. For your convenience, Vectornate makes ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in UNITED KINGDOM
The Vapor Pin® sampling device is a unique, patented, re-usable high-quality, reliable, sampling device and has a variety of applications. Following its introduction in 2011, the Vapor Pin® sampling device has become the worldwide standard in Vapor ...
Stainless Steel Drilling Guide
Used to establish the proper depth of the 1 1/2" diameter hole and center the 5/8" hole for proper Vapor Pin® sampling device installation to accept the secure cover. While wearing PPE, drill a 1½-inch diameter hole into the concrete slab ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Mansfield, UNITED KINGDOM
We design and manufacture gas sensors using patented miniature Infrared (IR) gas sensing technology. The sensors are made for use by Original Equipment Manufacturers (OEM's) of gas monitoring and detection products. The company was formed in 2001 by ...
Dynament - Model OEM-1 - Standard Gas Sensor Development Kit
This development kit has been designed by Dynament to provide OEM engineers with a quick and convenient method of appraising and characterising the Standard Range of infrared gas sensors. These sensors produce a 'raw' ac signal and require ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)Office in Harwich, UNITED KINGDOM
McBerns has been operating as a Consultant and Original Equipment Manufacture (OEM) in the water and construction industries since 1991. In this time the company has grown to become an Australian market leader in the provision of odour management ...
Manhole Odour Filter
Odours emissions are often detected in and around ground level manholes. McBerns has designed a Under Manhole Odour Filter. It comprises a simple yet innovative design that is fast and easy to install. Just clean the manhole rim of debris and slip ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Brabrand, DENMARK
Justsen Energiteknik A/S is an original equipment manufacturer (OEM) specializing in biomass boiler systems. We work through our technical partners in selected markets and together we deliver complete biomass boiler plant projects and after sales ...
Justsen - Model Type JUE-FVB - Hot Water Boiler
Capacity up to 15 MW. Ideal for fresh wood chips or energy crops with a high moisture content. Designed with a high degree of automation for extended intervals between stops for manual ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)Office in Fresnes les Montauban, FRANCE
As the European market leader in filter production SF-Filter is present in different countries. SF-Filter-Group is the leading supplier of mobile and industrial filters of any type and origin. Our range includes filters for oil, air, fuel, ...
SF - Model SDLH-ITU series - Stainless Steel Process Filter
SDLH-ITU series / 14 bar / 75 - 21120 ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Donaueschingen, GERMANY
With our company profile we would like to show you what makes us special. BB Thermo-Technik GmbH stands for innovative measurement technology for the past 35 years. Located in Donaueschingen we are your partner for the measurement and automation ...
VOC-Probe
For a pleasant room climate: VOC-probe from B+B! This high-power sensor shows exactly when it‘s time to ventilate your living space or business premises. Installed in a wall housing it measures the air quality, humidity and temperature. VOC ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Calolziocorte, ITALY
EnviroExperts Italia Srl (already known as DEPARIA) is a small company with some exclusive solutions for air pollution remediation: Regenerative Thermal Oxidation (RTO), DeNOx Selective Catalytic Reduction (DeNOx SCR), electrostatic precipitators, ...
Self-Cleaning Dust Collectors Sleeves for Dry Filtration
In addition to the electrostatic filters Deparia designs and manufactures self-cleaning dust collectors sleeves for capacities up to 200,000 Nm ³ / h and continuous operating temperatures up to 250 ° C. The sleeve filters Deparia are ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Warsaw, POLAND
Ecoexhaust Sp. z o.o. is a manufacturer of the state of the art SCR and DPF systems for NOx (nitrogen oxides) and particulate matter reduction. We believe that much more can be done to improve air quality. We specialize in SCR (selective catalytic ...
Ecoexhaust - Model DPF - Particulate Matter Reduction Filters
Particulate matter (PM) emissions directly affect the surrounding environment. Thanks to exhaust gas filtration, we are able to remove up to 99% of the particles emitted. When designing our systems, we pay attention to the characteristics ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Tianjin, CHINA
Tianjin Huayi Technology Co., LTD., located in the West Fubao Industrial Park, Xiqing district, Tianjin, is a high-tech enterprise engaged in the research and development of gas analysis instruments, providing customers with quality products, ...
-
Original equipment manufacturer (OEM)based in Taian, CHINA
Taian Dearto Automation Instrument Co..Ltd focuses on temperature measurement and calibration technology, committed to thermal metering and calibration instrument development and manufacturing; located in Tai' an High-tech Development Zone, is ...
Dearto - Model DTZ-01SG - Automatic Verification System of Noble Metal Thermocouple Cable
DTZ-01SG automatic verification system of noble metal thermocouple cable is completely developed based on the thermocouple wire manufacturer's process flow. It is mainly used for precious metal platinum rhodium wire / platinum rhodium filament ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Hangzhou, CHINA
EDUR is your specialist for individual centrifugal pumps. As a developer and international manufacturer of centrifugal pumps, we produce custom-fit to your application. At the same time, we act as competent consultants and technology partners with ...
EDUR - Stainless Steel Centrifugal Pumps
Stainless steel centrifugal pumps for the use in the food industry, water supply, cooling and refrigeration technology, air-conditioning, filtration, shipbuilding, apparatus engineering, energy technique and general machine engineering. Wide ranges ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in CHINA
We are a professional roots blower/roots vacuum pump in China, and we have RSR/MTS/MTRR/MTRF/MTRG/MJSR series product, they are widely used in sewage treatment and others industrial. We have become a comprehensive company that with rich exporting, ...
SHANGU - Model RSR - RSR model roots blower for sewage treatment aeration
Specification of RSR Series Roots Blower 1.All models of RSR series RSR-50 RSR-65 RSR-80 RSR-100 RSR-125 RSR-150C RSR-150A RSR-150 RSR-175A RSR-175 RSR-200H RSR-200 RSR-250D RSR-250 RSR-300 RSR-300C 2.Size of ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Kaohsiung City, TAIWAN
JJGP is an aluminum-recycling firm and also a high-quality producer of aluminum alloy ingot. We mainly offer various specification of aluminum alloy ingots, aluminum scraps and OEM (Original Equipment Manufacturer). JJGP is located in Qiaotou ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you