Continuous Emissions Monitoring (CEMS) Applications available in North Dakota
-
Premium
Insitu Flue Gas Desulfurization - DeSOx Analyzer
The Cerex UV3000P in-situ multi-gas analyzer for DeSOx, DeNOx, Ammonia Slip and general ...
By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).
-
Premium
Gas monitoring and dust monitoring
EM-5 series Continuous Emission Monitoring System (CEMS) Counting tail gas emission and realtime concentration NOX SO2 O2 Temperature pressure flow dust ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Flue gas denitration on-line continuous monitoring solution
Nitrogen oxide (NOx) is one of the main sources of air pollution, not only it has significant influence on global warming, but also involved in the destruction of the ozone layer. Technical measures to control NOx emissions can be divided into two categories: one is so-called source control, the characteristic is by a variety of technical means, to control NOx generation in the process of combustion reaction (i.e., low NOx combustion technology). Another kind is the so-called tail control, the characteristic is ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Continuous emissions monitoring solutions for mercury monitoring
Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions Monitoring for Steel Mills
Steel mills include a multitude of activities that generate gaseous emissions. Besides continuous emissions stack monitoring, the applications in a steel mill also include process mesaurements that provides important data to the operators in order to optimize the steel making ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas monitoring instruments and systems for stack testing
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Emissions Monitoring for Mining / Emissions Monitoring for Smelting
The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Air pollution, emission and process monitoring systems for CEM solutions
With decades of industrial experience, our systems are designed and developed as a complete turnkey solution. From sample extraction, through analysis, data acquisition and report management, each system is configured to comply with the normative demands and technical constraints of our clients, specific to their ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Gas analyzers and monitoring systems for Compliance measurements
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas analyzers and monitoring systems for Cement production
Cement is the main ingredient of concrete, which is the most common building material in the world. Cement industry is one of the biggest CO2 emission producers mainly due to the huge production capacities and calcination process, which is an important part of cement production. Cement manufacturers need to monitor these emissions continuously according to local emission regulations. Read about our solutions to the cement ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Monitoring solutions for the continuous emissions monitoring
Multi-gas Stack Analyzers for Continuous Emissions Monitoring. FTIR and UVDOAS Analyzer Models available for Insitu Probe, Internal or External Cells, or Cross Stack Sample ...
By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).
-
Premium
Gas monitoring instruments and systems for DeNOx process control
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas monitoring instruments and systems for nitric acid process
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Continuous emissions monitoring solutions for mining & smelting
OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring solutions for mineral wool production
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring solutions for fertilizer industry
Process control and emissions monitoring in a fertilizer plant is a challenge due to the high concentrations of HF. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas analyzers and monitoring systems for aluminum production sector
Production of aluminum from its ores at aluminum smelters results in carbon dioxide CO2, carbon monoxide CO, sulfur dioxide SO2, and hydrogen fluoride HF gas emissions to the atmosphere. Read about our solutions for aluminum ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas analyzers and monitoring systems for Power plants
Power plants are industrial facilities used to generate electric power with the help of one or more generators which convert different energy sources into electric power. Power plants need to monitor emissions continuously according to local emission regulations. Read about our solutions for the power ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Waste Incineration Application Note
Waste incineration is commonly used to dispose of the organic components of both domestic refuse and hazardous waste by burning it under controlled conditions. The heat generated in this process can be used to generate electricity, a process known as Waste-To-Energy (WTE). Because they have the potential to release highly toxic chemicals, such as polyaromatic hydrocarbons (PAH) and heavy metals, waste incinerators are subject to stringent environmental regulations.Temperature and emissions monitoring equipment ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Marine monitoring solutions
Marine monitoring is a variant of OPSIS general offers for continuous emissions monitoring (CEM) and process control. The special operating conditions on-board vessels call for special measures to comply with regulations and expectations. However, OPSIS has mastered this environment and has for many years successfully delivered systems for marine ...
By OPSIS AB based in Furulund, SWEDEN.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you