Continuous Emissions Monitoring (CEMS) Applications in United Kingdom
-
Premium
Continuous emissions monitoring solutions for special applications CEM
OPSIS is a world-leading supplier of CEMS (continuous emissions monitoring systems) for various special applications in the industrial emissions sector. The OPSIS gas monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and longest calibration intervals. We specialise in the design and supply of high accuracy, low maintenance, cross-duct, non-extractive CEM systems. We also provide additional products and services, including dust and ...
By OPSIS AB Distributor in Stroud, UNITED KINGDOM.
-
Premium
Continuous emissions monitoring for real driving emissions
There are many cars that have a large impact on the environment in many places around the world. The emissions from fossil fuel cars are too high, and previous test methods have not given the full picture. Tests in a laboratory has, so far, been made indoors, in laboratories, and they do not match the reality, as they do not take into account the real driving conditions. Therefore, we have developed an accurate and reliable monitoring system that can measure the emissions in real life conditions. Based on our core ...
By OPSIS AB Distributor in Stroud, UNITED KINGDOM.
-
Premium
Continuous emissions monitoring solutions for palm oil plants
Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several ...
By OPSIS AB Distributor in Stroud, UNITED KINGDOM.
-
Premium
Gas monitoring instruments and systems for process NOx measurement
Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen ...
By Gasmet Technologies - a Nederman company Office in Naseby Northampton, UNITED KINGDOM.
-
Premium
Continuous emissions monitoring solutions for H2S monitoring
To monitor H2S can be difficult. The UV absorption is without structure and the IR absorption has strong interference from H2O. The traditional way has been to remove all SO2 from the sample while keeping H2S, then convert H2S to SO2 ,and finally measure SO2 which then effectively yields the H2S concentration. The instruments used have often been ambient air SO2 analysers and extractive dilution systems. However, it is not unusual to experience practical problems with these type of ...
By OPSIS AB Distributor in Stroud, UNITED KINGDOM.
-
Premium
Continuous emissions monitoring solutions for mineral wool production
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...
By OPSIS AB Distributor in Stroud, UNITED KINGDOM.
-
Premium
Gas analyzers and monitoring systems for Cement production
Cement is the main ingredient of concrete, which is the most common building material in the world. Cement industry is one of the biggest CO2 emission producers mainly due to the huge production capacities and calcination process, which is an important part of cement production. Cement manufacturers need to monitor these emissions continuously according to local emission regulations. Read about our solutions to the cement ...
By Gasmet Technologies - a Nederman company Office in Naseby Northampton, UNITED KINGDOM.
-
Premium
Continuous emissions monitoring solutions for power plants
OPSIS offers fully automated system solutions for continuous monitoring in power plants. The monitoring systems have been tested and approved by the German TÜV and the U.S. EPA among others, for the best performance and longest calibration ...
By OPSIS AB Distributor in Stroud, UNITED KINGDOM.
-
Premium
Continuous emissions monitoring for aluminium smelters
Process control and emissions monitoring in an aluminium smelter is a challenge due to the high concentrations of HF. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB Distributor in Stroud, UNITED KINGDOM.
-
Premium
Fully-automated gas chromatographs solutions for stack emissions monitoring sector
Synspec GCs can also be used as continuous emission monitoring systems (CEMS). In general, emissions from stacks are in the higher ranges of concentrations to be measured. Synspec equipment, which is usually geared towards very low detection levels, can be tuned to the concentration ranges that are emitted at your production plant. Depending on the composition of the emissions a sample treatment might be ...
By Synspec BV Distributor in Stroud, UNITED KINGDOM.
-
Premium
Waste Incineration Application Note
Waste incineration is commonly used to dispose of the organic components of both domestic refuse and hazardous waste by burning it under controlled conditions. The heat generated in this process can be used to generate electricity, a process known as Waste-To-Energy (WTE). Because they have the potential to release highly toxic chemicals, such as polyaromatic hydrocarbons (PAH) and heavy metals, waste incinerators are subject to stringent environmental regulations.Temperature and emissions monitoring equipment ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Continuous emissions monitoring solutions for steel plants
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
By OPSIS AB Distributor in Stroud, UNITED KINGDOM.
-
Premium
Continuous emissions monitoring for cement industry
Process control and emissions monitoring in cement plants, can be a challenge due to the dusty and corrosive environment. OPSIS provides an accurate system that will operate with high performance and a minimum of ...
By OPSIS AB Distributor in Stroud, UNITED KINGDOM.
-
Premium
Continuous emissions monitoring solutions for mercury monitoring
Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable ...
By OPSIS AB Distributor in Stroud, UNITED KINGDOM.
-
Premium
Gas flow management solutions for standard applications sector
Standard Applications of Gas Flow ...
By Environics, Inc. Distributor in UNITED KINGDOM.
-
Premium
Air pollution, emission and process monitoring systems for CEM solutions
With decades of industrial experience, our systems are designed and developed as a complete turnkey solution. From sample extraction, through analysis, data acquisition and report management, each system is configured to comply with the normative demands and technical constraints of our clients, specific to their ...
By ENVEA Office in Swavesey, UNITED KINGDOM.
-
Premium
Continuous emissions monitoring solutions for mining & smelting
OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust ...
By OPSIS AB Distributor in Stroud, UNITED KINGDOM.
-
Premium
Gas monitoring instruments and systems for DeNOx process control
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
By Gasmet Technologies - a Nederman company Office in Naseby Northampton, UNITED KINGDOM.
-
Premium
Continuous Emissions Monitoring Calibration Systems (CEMCS)
The Environics Series Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. Our systems are custom built, computerized, mass flow controller based gas calibration systems which allow you to dilute a single high concentration cylinder of span gas to low levels for the calibration of gas analyzers. ...
By Environics, Inc. Distributor in UNITED KINGDOM.
-
Premium
Continuous emissions monitoring solutions for chemical industry
Process control and emissions monitoring in a chemical plant is a challenge due to corrosive gases, high dust load, and high temperatures. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB Distributor in Stroud, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you