Continuous Emissions Monitoring (CEMS) Equipment For Air And Climate Available In Libya
-
ShowcaseManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean research vessels and hundreds of locations in between. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The BioCapt® Single-Use Microbial Impactor helps minimize false positives for microbial activity in pharmaceutical cleanrooms by reducing contamination from handling of agar plates. This results in a decrease in investigations while increasing productivity. Additionally, many costly and time consuming sterilization steps, such as autoclaving, disinfecting, handling and logistics are ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The High-Temperature Hygronom is also called high-temperature gas analyzer, gas moisture meter or dew-point meter, which is used to measure the humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, HM-100 high-temperature gas moisture analyzer also can be used in industrial online humidity ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Our RD100 Real Driving Emissions system is an accurate and reliable monitoring system that can measure the emissions from car exhaust in real life conditions. The RD100 system is mounted on a car and measures the real driving emissions during an ordinary ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-200 dust monitor is a self-developed probe-in monitor, based on years of research on dust detection technology. Different from traditional back scattering dust monitor (such as DMS-100/MS-1000), DMS-200 installs a dust measurement module at the top of the probe, which directly stretches into the stack for dust measurement in close distance and it adopts laser forward scattering method to ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-300 I dust monitor is a self-developed extraction dust monitor, based on years of technology research and development for dust monitoring. It uses laser forward scattering prnciple to monitor the dust concentration. It owns features of low detection limit(as low as 0.05mg/m3), no interference by moisture with full process high temperature heat tracing for measurment. It can be widely applied ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
US EPA PS11 compliant ProScatter™ particulate CEM providing high quality emission measurement for low dust concentrations from industrial processes. Utilising the patented ProScatterTM Forward Scatter measurement technique for measuring particulate concentration levels, typically between 0.06 mg/m3 to 300 mg/m3, this measurement technique offers improved levels of performance which make the ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved particulate CEM which meets US EPA PS-1 requirements for Opacity monitoring from combustion stacks. Robust multi corner cube reflector provides truer reflection of transmitted light compared to traditional “mirror type” reflectors providing greater confidence in measurement. ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
High-temperature hygronom is also called high-temperature moisture meter or high-temperature dew-point meter, which is used to measure the humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration, widely applied in industrial online humidity ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7100 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 7100 is based on the principle of gas flow through MFC (Mass Flow Controllers) and is built according the ISO 6145/7 standards. This instrument provides a very high flexibility allowing to combine multigas mixtures (up to 5 gases + a balance gas) and multi-range ...
-
PremiumManufactured by ENVEAbased in FRANCE
The STACKFLOW 200 uses the wellestablished Averaging Pitot sensor technology to provide continuous emission monitoring of Flow, Temperature and Pressure. Utilised as a standalone sensor or in combination with Environnement S.A & PCME analyzers and controllers for the monitoring of particulates, gases and flue gas as part of a larger monitoring ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are displayed. Furthermore, a real-time display as line diagram is ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Recommended for extractive continuous emissions monitoring. Operating Humidity: Up to 75%. Optical Path Length: 1cm to 10m. Maintenance: IR Source: 1 year, field serviceable; typical 3 to 5 years. Sample Filter: Dependent on application - replace as ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS offers a wide range of shelter models and configurations to guarantee the optimal operation environment for your measurement equipment. We have experience in all environments, from hot and humid, to ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
High-sensitivity, forward-scatter laser measurement for particulate matter, for use in combustion processes where condensed water is not present (for sale in the USA and China only). 4650-PM provides the stable, accurate low-range measurement of particulate matter in stacks and ducts where water droplets are not present in the flue gas. NOTE: The 4650-PM is currently available only in the USA and ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
System 400CS is a cost-effective, high-performance monitoring package, designed for power plants and waste to energy plants. The measurements are based on the FTIR (Fourier Transform Infrared Spectroscopy) and/or DOAS technique (Differential Optical Absorption Spectroscopy), allowing continuous monitoring of several compounds. ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The ET 301 is a dust monitor using well-proven technology providing accurate and rapid results. Being adaptable it can be used on duct sizes from 250mm to 5m making the ET 301 a suitable sensor for a wide range of applications where a dust measurement is required. ET 301 continuous dust monitor uses the well-proven sensor technology to directly measure mass particulate concentration by sensing ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 3400-OVEN is an integrated component of the 3400 System and provides a temperature controlled interface between the heated umbilical line and the 3400 cabinet. This heated zone is critical to ensure quantitative transfer of mercury species to the 3400 system while maintaining the same speciated mercury fractions that are present at the sample probe ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved ProScatterTM particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you