Only show results in Virginia? Ok

cooling tower basin (Cooling Towers) equipment

  • Model FC 803 - Cooling Towers

    FC 803 is an economical water-based defoamer which is extremely effective on surfactant-based foam found in equalization basins, flumes, and effluent outfall. FC 803 contains no liquid hydrocarbons which cause oily sheen on river outfall.

    By Enterprise Specialty Products, Inc. (ESP) based in Laurens, SOUTH CAROLINA (USA). from Cooling Towers Product line

  • Delta Cooling - Anti-Microbial Cooling Towers

    Anti-Microbial (AM) Cooling Tower. According to test results from Special Pathogens Laboratory, The Legionella Experts®, our tower displays the only Anti-Microbial Activity against Legionella bacteria out of all the common cooling tower materials.

    By Delta Cooling Towers, Inc based in Rockaway, NEW JERSEY (USA). from Anti-Microbial Cooling Towers Product line

  • Model Package Type - Cooling Towers

    Package type cooling towers are preferred in facilities with a water flow rate between 0-1200m³/hr. Since these cooling towers are produced with Fiberglass Reinforced Polyester (FRP), a material with a longer lifetime than most of its alternatives, they have low operating and maintenance costs. In fact, FRP package type cooling towers are of ...

    By YOLYAPI A.S. based in Istanbul, TURKEY.

  • Evapco - Model AXS - Cooling Tower

    The Advanced Crossflow Series (AXS) puts a new spin on induced-draft, axial fan, crossflow cooling technology with features designed for simplified maintenance.  Crafted from decades of engineering know-how, EVAPCO's AXS cooling towers feature state-of-the-art induced draft, crossflow technology to deliver superior operating advantages in any ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Tower Product line

  • Evapco - Model cAT - Cooling Towers

    Crafted from decades of engineering know-how, the Containerized (cAT) cooling towers series from EVAPCO features state-of-the-art induced draft, counterflow technology to deliver superior operating advantages in any climate. From performance to maintenance, they simply work smarter.

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Towers Product line

  • Evapco - Model LSTE - Cooling Tower

    Crafted from decades of engineering know-how, the LSTE cooling tower series from EVAPCO features state-of-the-art induced draft, counterflow technology to deliver superior operating advantages in any climate.  From performance to maintenance, they simply work smarter. The standard in low-profile, low-sound, centrifugal fan, ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Tower Product line

  • Model HBR Series - Cooling Towers

    HBR series is the result of the long experience of MITA technicians. It combines the well-known TORRAVAL’s distinguishing feature of corrosion-free products with an easy and innovative working principle,designed to reduce water and energy consumption to a minimum.. The distinctive characteristic of the HBR hybrid cooler is that it has two ...

    By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Cooling Towers Product line

  • Evapco - Model AT - Cooling Tower

    Crafted from decades of engineering know-how, the Advanced Technology (AT) cooling towers series from EVAPCO features state-of-the-art induced draft, counterflow technology to deliver superior operating advantages in any climate.  From performance to maintenance, they simply work smarter.

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Tower Product line

  • Model PME-E Series - Cooling Towers

    The PME-E series cooling towers are manufactured with a high thickness (3-5 mm) steel bearing frame, which is hot-dip galvanized after all works and with fibreglass sandwich panels of 22 mm thickness. This kind of panel is made by a double laminated layer with supporting expanded material in between. This construction grants, also on large ...

    By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Cooling Towers Product line

  • Evapco - Model LPT - Cooling Tower

    Crafted from decades of engineering know-how, the LPT cooling tower series from EVAPCO features state-of-the-art induced draft, counterflow technology to deliver superior operating advantages in any climate.  From performance to maintenance, they simply work smarter. The LPT sets the standard in low-profile, low-sound, ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Tower Product line

  • Evapco - Model SUN - Cooling Tower

    EVAPCO, Inc. continues its dedication to energy efficiency improvements with the newest AT Series induced draft, counterflow cooling tower – the EVAPCO SUN. Crafted from decades of engineering know-how, the SUN cooling towers series from EVAPCO features state-of-the-art induced draft, counterflow technology to deliver superior operating ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Tower Product line

  • Cooling Tower Cleaning

    The diagram below shows a sludge removal system to clean the basin of a refinery cooling tower. This prevents fouling problems that can be caused when sludge in the basin is transferred to the cooling water lines and heat exchangers in the process unit.

    By BakerCorp based in Shafter, CALIFORNIA (USA). from Cooling Tower Cleaning Product line

  • TowerClean - System For Cooling Tower Cleaning

    Filtration for cooling tower basins and remote sumps in HVAC applications. TowerClean and TowerCleanPLUS systems eliminate the need for manual basin cleaning by separating solids out of cooling tower basins and remote sumps using strategically placed LAKOS HydroBoosters. Accomplished by preventing solids accumulation in the basin through ...

  • Midwest - Cooling Tower Platforms

    Midwest Towers offers fiberglass equipment access walkways and work platforms for permanent or temporary use. They are corrosion-resistant, slip-resistant, ultraviolet-resistant, strong, lightweight, and fire-retardant. The strong, light fiberglass panels or grating can be custom-designed for the best fit around mechanical equipment for ...

    By Midwest Towers, Inc. based in Chickasha, OKLAHOMA (USA). from Cooling Tower Platforms Product line

  • EvapTech - Model EX Series - Crossflow Cooling Towers

    An EvapTech EX Cooling Tower is an induced draft, crossflow tower custom designed to meet our customers' requirements for cost, footprint, power consumption and pumphead. Browse the sections to the right for more information on the important details of an EvapTech Series EX Cooling Tower. For even more person service, especially about how we ...

    By EvapTech, Inc. based in Lenexa, KANSAS (USA).

  • BBM - Cooling Tower Silencers

    As a leading supplier of industrial silencers and enclosures BBM Akustik Technologie supplies silencers for water re-cooling systems based on wet cooling, dry cooling, fresh-water cooling or any combinations of these. These silencers are used in cooling towers that work by natural draught or by forced air. Moreover, we provide the design and ...

    By BBM-CPG Technology, Inc. based in Laurens, SOUTH CAROLINA (USA).

  • Model FC Series - Fiberglass Cooling Towers

    The FC Series cooling towers are designed for outdoor use in industrial manufacturing locations and come with the industry’s best warranty - ten years on the shell and five years on the complete tower – including the motor. Towers ship assembled with the fan motor and fan blade removed to prevent shipping damage.

    By Thermal Care, Inc. based in Niles, ILLINOIS (USA). from Fiberglass Cooling Towers Product line

  • Model FT Series - Fiberglass Cooling Towers

    These lightweight fiberglass cooling towers are designed for long life and low maintenance at a competitive price. FT Series towers are of a counter flow design, carefully engineered with the optimum combination of heat transfer media, uniform air flow and even water distribution. They provide maximum air/water contact and low air ...

    By Thermal Care, Inc. based in Niles, ILLINOIS (USA). from Fiberglass Cooling Towers Product line

  • Marley - Model CP - Fiberglass Cooling Tower

    The Marley/Balcke CP fiberglass, induced draft, counterflow cooling tower is the ideal solution for larger space-sensitive applications. Its corrosion resistant fiberglass construction makes it an excellent alternative to stainless steel cooling towers. While the choice of high performance, low clog, or splash fill options ensures the product ...

    By SPX Cooling Technologies, Inc. - a division of SPX Corporation based in Overland Park, KANSAS (USA). from Fiberglass Cooling Tower Product line

  • Wet Cooling Tower

    Wet cooling tower is a heat rejection device that extracts heat from the moving water stream to the atmosphere thereby reducing the water temperature significantly. Type of heat rejection in a cooling tower is termed 'evaporative' in that it allows a small portion of the water being cooled to evaporate into a moving air stream to provide ...

    By YOLYAPI A.S. based in Istanbul, TURKEY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you