Only show results in Virginia? Ok

cooling tower component (Cooling Towers) equipment

  • Showcase

    2H Sanipacking - Anti-Legionella Fills&Drift Eliminators

    Reduction Of Risk Of Legionella Pneumophila In Open Cooling Circuits; Time and again news report about outbreaks of legionella disease in areas near cooling towers. Careful water treatment, together with regular maintenance reduces the risk of bacteria growth in the cooling circuit. But one step more leads to an even higher performance of these ...

    By ENEXIO Water Technologies GmbH based in Hürth, GERMANY. from Anti-Legionella Fills&Drift Eliminators Product line

  • Premium

    Model S.sensing MX - Modular Analyzer System for Cooling Water Applications

    S.sensing MX is a new, modular analyzer system especially designed for industrial cooling water applications. The modular system contains different types of sensors and analyzers connected to one central cooling tower controller. This allows fitting S.sensing MX to practically any application.

    By Kurita based in Tokyo, JAPAN. from Modular Analyzer System for Cooling Water Applications Product line

  • EvapTech - Model ES/ESP Series - Cooling Tower

    The FM Approved Series ES and ESP evolved from the proven EvapTech Series EC product line. These products share high quality fire-retardant fiberglass pultrusions with proven structural integrity and a design methodology confirmed by FM Approvals Standard Class 4930 for resistance to the most extreme natural hazards. EvapTech is a participating ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Tower Product line

  • EvapTech - Model ES/ESP Series - Cooling Tower

    The FM Approved Series ES and ESPevolved from the proven EvapTech Series EC product line. These products share high quality fire-retardant fiberglass pultrusions with proven structural integrity and a design methodology confirmed by FM Approvals Standard Class 4930 for resistance to the most extreme natural hazards.

    By EvapTech, Inc. based in Lenexa, KANSAS (USA).

  • Model PME-E Series - Cooling Towers

    The PME-E series cooling towers are manufactured with a high thickness (3-5 mm) steel bearing frame, which is hot-dip galvanized after all works and with fibreglass sandwich panels of 22 mm thickness. This kind of panel is made by a double laminated layer with supporting expanded material in between. This construction grants, also on large ...

    By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Cooling Towers Product line

  • Model HBR Series - Cooling Towers

    HBR series is the result of the long experience of MITA technicians. It combines the well-known TORRAVAL’s distinguishing feature of corrosion-free products with an easy and innovative working principle,designed to reduce water and energy consumption to a minimum.. The distinctive characteristic of the HBR hybrid cooler is that it has two ...

    By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Cooling Towers Product line

  • EvapTech - Model EX Series - Cooling Tower

    An EvapTech EX Cooling Tower is an induced draft, crossflow tower custom designed to meet our customers' requirements for cost, footprint, power consumption and pumphead.

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Tower Product line

  • EvapTech - Model EC Series - Cooling Tower

    Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems. EvapTech also offers new and replacement field erected cooling towers and a variety of field erected cooling tower parts ...

    By Evapco Inc. based in Westminster, MARYLAND (USA). from Cooling Tower Product line

  • Midwest - Crossflow Cooling Towers

    Midwest cooling towers offers a wide choice of models in the classic, proven crossflow design. Crossflow design cooling towers offer excellent, easy accessibility of all key components such as fill, drift eliminators, mechanical equipment and water distribution system. This takes out a lot of the hassle for your maintenance personnel. Midwest ...

    By Midwest Towers, Inc. based in Chickasha, OKLAHOMA (USA). from Crossflow Cooling Towers Product line

  • ICS - Industrial Cooling Towers

    ICS is a preferred cooling tower provider specializing in cooling tower engineering, construction, thermal upgrades and replacement cooling towers worldwide. Our cooling tower construction services provide our clients with turnkey solutions and highly reliable industrial cooling solutions. ICS offers complete evaporative cooling tower services ...

    By Industrial Cooling Solutions, Inc. (ICS) based in Lakewood, COLORADO (USA).

  • Midwest - Counterflow Cooling Towers

    Midwest Towers offers a wide choice of models in space-efficient, counterflow design. Counterflow design cooling towers usually offer a smaller footprint than crossflow towers and allow maximum thermal performance out of each plan area. Counterflow towers also help minimize your pump head requirements. And, counterflow towers are less likely to ...

    By Midwest Towers, Inc. based in Chickasha, OKLAHOMA (USA). from Counterflow Cooling Towers Product line

  • BBM - Cooling Tower Silencers

    As a leading supplier of industrial silencers and enclosures BBM Akustik Technologie supplies silencers for water re-cooling systems based on wet cooling, dry cooling, fresh-water cooling or any combinations of these. These silencers are used in cooling towers that work by natural draught or by forced air. Moreover, we provide the design and ...

    By BBM-CPG Technology, Inc. based in Laurens, SOUTH CAROLINA (USA).

  • WRI - Model AquaTex™ CT - Cooling Tower System

    The first AquaTex™ CT was designed to treat cooling tower 'blowdown' water for virtually any commercial-grade cooling tower. The first AquaTex™ CT was designed and installed in the late 1980's. A patent was received for its recycling and advanced oxidation processes, coupled with nanofiltration to continually filter, disinfect, and ...

    By Wastewater Resources Inc. (WRI) based in Scottsdale,, ARIZONA (USA). from Cooling Tower System Product line

  • CCS Titan™ - Cooling Tower Reconstruction

    The Titan Crossflow cooling tower – for large industrial, process and power generation projects. Fast, safe construction. Easier maintenance. Mission-critical performance. With capacities of 3,000 tons per cell and greater, the CCS Titan delivers energy-efficient crossflow performance for the largest projects, and in the smallest footprint. ...

    By Composite Cooling Solutions, L.P based in Fort Worth, TEXAS (USA). from Cooling Tower Reconstruction Product line

  • Model VT0/1 - Open Cooling Towers

    Since 1978, thousands globally installed, proving the VT0/1-previously called VXT- cooling tower reliability. Fans, motor and drive system (V-belt) are located in the dry air, preventing moisture and condensation.  No external moving parts, helping it withstand the toughest weather. The thermal performance of VT0/1 cooling towers is tested ...

    By Baltimore Aircoil Company based in Jessup, MARYLAND (USA). from Open Cooling Towers Product line

  • BERG - Fiberglass Industrial Cooling Tower

    Berg’s line of fiberglass industrial cooling towers are manufactured of extra thick fiberglass and premium quality components to provide years of trouble-free, low maintenance performance. They feature a host of standard features and are supplied fully assembled on a structural steel integral base for easier installation and hook-up.

    By BERG Chilling Systems Inc. based in Toronto, ONTARIO (CANADA). from Fiberglass Industrial Cooling Tower Product line

  • Model PMM - Open Circuit Cooling Towers

    PMM series is suggested in big size plants. Every unit is designed according to the technical data of the relevant project. All models are made of factory pre-assembled modules and components. The particular design of PMM series grants a quick and inexpensive installation, besides the possibility of adjusting/designing the unit to fit the existing ...

    By MITA S.r.l. based in Siziano (PV), ITALY. from Open Circuit Cooling Towers Product line

  • Cooling Towers / Fluid Coolers

    Corrosion of condenser system components such as circulating pumps, condenser tube sheets and cooling towers can be very costly in terms of service disruption, loss of production, increased maintenance and capital equipment replacement. Implementing a properly designed chemical water treatment program is the simplest method of preventing these ...

    By PACE Chemicals Ltd. based in Burnaby, BRITISH COLUMBIA (CANADA).

  • Everfilt - Model C-Series - Everfilt Cooling Tower Filter

    Everfilt’s cooling tower filters and cooling water filters offer a practical and efficient means of reducing maintenance and downtime of condensers, heat exchangers and cooling towers. They also reduce costly replacements of pump casings and seals, valve seals and other process components. The most widely used type of filter for this purpose ...

    By Everfilt based in Mira Loma, CALIFORNIA (USA). from Everfilt Cooling Tower Filter Product line

  • Model PMM Series - Open Circuit Cooling Towers

    PMM are open circuit cooling towers of counter-flow composed of factory pre-assembled modules. Its capacity goes from 2.6 to 14 MW (aproximate value, taking as a reference a cell, a thermal range of 5ºC, laminar filling of 19 mm and modular systems). The PMM series is proposed in big-size plants. Each unit is engineered according to the ...

    By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Open Circuit Cooling Towers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you