Only show results in Virginia? Ok

Cooling Tower Efficiency (Cooling Towers) equipment

  • TOWER MATE - Model 217 - Cooling Tower Treatment

     TOWER MATE cooling tower treatment is a versatile cooling tower treatment designed to provide superior scale control and corrosion inhibition for cooling towers operating in a wide range of make-up water conditions. Its very unique chemical balance provides for the running of several cycles of concentration while maintaining a very clean ...

    By Constant America based in Montreal, QUEBEC (CANADA). from Water Technology Product line

  • Model M Series - Cooling Towers 10 to 175 Ton

    Our energy-efficient Metal Series induced-draft designs are pre-assembled, and feature galvanized components and PVC fill for corrosion protection. Energy-efficient Metal Series induced-draft cross flow towers are pre-assembled, and feature galvanized components and PVC fill for corrosion protection. The metal Series feature Thermostat-controlled ...

    By ACS Group based in New Berlin, WISCONSIN (USA). from Cooling Towers Product line

  • Sodi - Model D-Tower - Speed Camera Sites

    Sodi Scientifica is proud to introduce its new road side housing  D-Tower, with its sleek design and its innovative look.

    By Sodi Scientifica Srl based in Calenzano, ITALY. from Other Products Product line

  • Model FT Series - Fiberglass Cooling Towers

    These lightweight fiberglass cooling towers are designed for long life and low maintenance at a competitive price. FT Series towers are of a counter flow design, carefully engineered with the optimum combination of heat transfer media, uniform air flow and even water distribution. They provide maximum air/water contact and low air ...

    By Thermal Care, Inc. based in Niles, ILLINOIS (USA). from Cooling Towers Product line

  • Midwest - Counterflow Cooling Towers

    Midwest Towers offers a wide choice of models in space-efficient, counterflow design. Counterflow design cooling towers usually offer a smaller footprint than crossflow towers and allow maximum thermal performance out of each plan area. Counterflow towers also help minimize your pump head requirements. And, counterflow towers are less likely to ...

    By Midwest Towers, Inc. based in Chickasha, OKLAHOMA (USA). from Cooling Towers Product line

  • Crossflow Cooling Towers

    The crossflow splash fill cooling tower utilizes open pan hot water distribution and crosscurrent air / water contact. Like the counterflow splash fill tower, this is best suited for applications where water quality is not controlled. Generally rated as higher capital and operating cost, this selection is best suited for special applications. ...

    By Ecodyne Ltd based in Burlington, ONTARIO (CANADA). from Cooling Towers Product line

  • BERG - Fiberglass Industrial Cooling Tower

    Berg’s line of fiberglass industrial cooling towers are manufactured of extra thick fiberglass and premium quality components to provide years of trouble-free, low maintenance performance. They feature a host of standard features and are supplied fully assembled on a structural steel integral base for easier installation and hook-up.

    By BERG Chilling Systems Inc. based in Toronto, ONTARIO (CANADA). from Cooling Towers Product line

  • Model FC Series - Fiberglass Cooling Towers

    The FC Series cooling towers are designed for outdoor use in industrial manufacturing locations and come with the industry’s best warranty - ten years on the shell and five years on the complete tower – including the motor. Towers ship assembled with the fan motor and fan blade removed to prevent shipping damage.

    By Thermal Care, Inc. based in Niles, ILLINOIS (USA). from Cooling Towers Product line

  • Marley - Model CP - Fiberglass Cooling Tower

    The Marley/Balcke CP fiberglass, induced draft, counterflow cooling tower is the ideal solution for larger space-sensitive applications. Its corrosion resistant fiberglass construction makes it an excellent alternative to stainless steel cooling towers. While the choice of high performance, low clog, or splash fill options ensures the product ...

    By SPX Cooling Technologies, Inc. - a division of SPX Corporation based in Overland Park, KANSAS (USA). from Cooling Towers Product line

  • Premier - Induced Draft Tower

    Delta’s Premier induced draft, counter flow, low profile cooling tower design is available in single module capacities from 250 to 500 cooling tons. These towers use the same unitary seamless engineered plastic construction that Delta has been manufacturing since 1997, and have been very well received in both commercial and industrial ...

    By Delta Cooling Towers, Inc based in Rockaway, NEW JERSEY (USA). from Cooling Towers Product line

  • ECODYNE - Counterflow Cooling Towers

    The Counterflow film fill cooling tower is the design most frequently specified by purchasers. Lower capital cost, generally lower evaluated operating cost, the Counterflow film fill tower uses high efficiency PVC film fill. Intended for industrial applications where water quality is controlled, the Counterflow film fill tower provides a low ...

    By Ecodyne Ltd based in Burlington, ONTARIO (CANADA). from Cooling Towers Product line

  • Midwest - Ethanol Towers

    Midwest Cooling Towers has the experience and expertise to build the right cooling tower for your ethanol plant. Our experienced engineering and design group can offer you the best-cost option for your cooling tower.

    By Midwest Towers, Inc. based in Chickasha, OKLAHOMA (USA). from Cooling Towers Product line

  • Pioneer - Forced Draft Towers

    Delta’s Pioneer forced draft, counter flow design is available in single module capacities from 10 to 100 cooling tons. Manufactured since 1971, this unitary seamless engineered plastic cooling tower design has been manufactured since 1971 and have been very well received in both commercial and industrial applications.

    By Delta Cooling Towers, Inc based in Rockaway, NEW JERSEY (USA). from Cooling Towers Product line

  • Model TM Series - Induced Draft Towers

    Delta’s TM Series induced draft, counter flow design are available in single unit capacities from 250 to 2,000 cooling tons. Manufactured since 2001, the TM Series has been very well received in both commercial and industrial applications. The modular design allows isolation of cells for operational flexibility.

    By Delta Cooling Towers, Inc based in Rockaway, NEW JERSEY (USA). from Cooling Towers Product line

  • Kelvion - Model Polacel CMC Series - Counter-Flow Modular Cooling Tower

    The Polacel CMC systems combine a high cooling capacity with low energy consump­tion. The modules are supplied ready to use and they are easy to adjust to cooling require­ments and the available space, whether they are used singly or in series. The cooling perfor­mance of these cooling towers is optimal and operation is problem free. ...

    By Kelvion Holding GmbH based in Bochum, GERMANY. from Modular Cooling Towers Product line

  • Model RM Series - Cooling Towers

    RM series are induced draught cooling towers, counter-flow with axial fans. These are high efficiency equipments, capable of cooling flows from up to 1.700 m3/h per cell. Their design and conception is focused on industrial processes, where, depending on the selected type of fillings, any water qualities can be treated. Its structure covered with ...

    By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Field Erected Cooling Towers Product line

  • Model OC Series - Cooling Towers

    OC series are induced draught cooling towers, counter-flow with axial fans. We are talking about equipments capable of cooling flows from up to 5.500 m3/h per cell, which makes them suitable for industrial processes. Depending on the selected type of fillings, they are prepared to cool any water quality. Its concrete structure can be covered with ...

    By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Field Erected Cooling Towers Product line

  • Model PMS - Open Circuit Fiberglass Cooling Tower

    PMS series is a fiberglass cooling tower suggested in small size plants, all models K12 version are EUROVENT Certified. Capacity: from 18 to 860 kW. Directly coupled axial motor-fan group/s, low installed power, low noise levels. IP56 motors. Entirely corrosion–free casing, basin (with sloping base) and water distribution system (FRP, PVC, ...

    By MITA S.r.l. based in Siziano (PV), ITALY. from Open Circuit Cooling Towers Product line

  • Model HBR Series - Cooling Towers

    HBR series is the result of the long experience of MITA technicians. It combines the well-known TORRAVAL’s distinguishing feature of corrosion-free products with an easy and innovative working principle,designed to reduce water and energy consumption to a minimum.. The distinctive characteristic of the HBR hybrid cooler is that it has two ...

    By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Factory Assembly Cooling Towers Product line

  • Kelvion - Model Polacel CMDR Series - Counter-Flow Modular Cooling Tower

    The Polacel CMDR cooling tower concept can process large quanti­ties of water and it has a substan­tial cooling capacity. The modular CMDR systems are easy to adjust to cooling require­ments and the available space, whether they are used singly or in series. The cooling perfor­mance of these cooling towers is optimal and operation ...

    By Kelvion Holding GmbH based in Bochum, GERMANY. from Modular Cooling Towers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you