Only show results in Virginia? Ok

Cooling Tower Makeup (Cooling Towers) equipment

  • TOWER MATE - Model 217 - Cooling Tower Treatment

     TOWER MATE cooling tower treatment is a versatile cooling tower treatment designed to provide superior scale control and corrosion inhibition for cooling towers operating in a wide range of make-up water conditions. Its very unique chemical balance provides for the running of several cycles of concentration while maintaining a very clean ...

    By Constant America based in Montreal, QUEBEC (CANADA). from Water Technology Product line

  • BERG - Fiberglass Industrial Cooling Tower

    Berg’s line of fiberglass industrial cooling towers are manufactured of extra thick fiberglass and premium quality components to provide years of trouble-free, low maintenance performance. They feature a host of standard features and are supplied fully assembled on a structural steel integral base for easier installation and hook-up.

    By BERG Chilling Systems Inc. based in Toronto, ONTARIO (CANADA). from Cooling Towers Product line

  • Pioneer - Forced Draft Towers

    Delta’s Pioneer forced draft, counter flow design is available in single module capacities from 10 to 100 cooling tons. Manufactured since 1971, this unitary seamless engineered plastic cooling tower design has been manufactured since 1971 and have been very well received in both commercial and industrial applications.

    By Delta Cooling Towers, Inc based in Rockaway, NEW JERSEY (USA). from Cooling Towers Product line

  • Model TM Series - Induced Draft Towers

    Delta’s TM Series induced draft, counter flow design are available in single unit capacities from 250 to 2,000 cooling tons. Manufactured since 2001, the TM Series has been very well received in both commercial and industrial applications. The modular design allows isolation of cells for operational flexibility.

    By Delta Cooling Towers, Inc based in Rockaway, NEW JERSEY (USA). from Cooling Towers Product line

  • Premier - Induced Draft Tower

    Delta’s Premier induced draft, counter flow, low profile cooling tower design is available in single module capacities from 250 to 500 cooling tons. These towers use the same unitary seamless engineered plastic construction that Delta has been manufacturing since 1997, and have been very well received in both commercial and industrial ...

    By Delta Cooling Towers, Inc based in Rockaway, NEW JERSEY (USA). from Cooling Towers Product line

  • Aqua-Serv - Cooling Tower

    Regardless of design, once-through, open recirculating, or closed recirculating evaporative coolers, Aqua-ServEngineers, Inc. can provide proven technology and service.Major differences in makeup water quality demand many different cooling water applications. Aqua-ServEngineers, Inc. can provide systems with phosphate, phosphonate, molybdate, or ...

    By Aqua-Serv Engineers, Inc based in Fontana, CALIFORNIA (USA).

  • Cooling Tower Chemical Feeders

    Whether your cooling tower is large or small, it has chemical treatment requirements that must be met accurately and reliably to control corrosion, scale and deposits. Chemicals injected include: Corrosion inhibitors, scale inhibitors, dispersants, biological control agents, coagulants, flocculants.

    By ChemIndustrial Systems, Inc. based in Cedarburg, WISCONSIN (USA). from Cooling Tower Chemical Feeders Product line

  • Model PMS - Open Circuit Fiberglass Cooling Tower

    PMS series is a fiberglass cooling tower suggested in small size plants, all models K12 version are EUROVENT Certified. Capacity: from 18 to 860 kW. Directly coupled axial motor-fan group/s, low installed power, low noise levels. IP56 motors. Entirely corrosion–free casing, basin (with sloping base) and water distribution system (FRP, PVC, ...

    By MITA S.r.l. based in Siziano (PV), ITALY. from Open Circuit Cooling Towers Product line

  • Model MCC - Closed Circuit Cooler

    The closed circuit cooler (MCC series) is suggested in plants in which the quality of the fluid to be cooled is a basic requisite (no contact with air is allowed). All models are totally pre-assembled in our workshop.

    By MITA S.r.l. based in Siziano (PV), ITALY. from Closed Circuit Cooling Towers Product line

  • Model HBR - Closed Circuit Cooling Towers

    HBR series is suggested in plants in which the quality of the fluid to be cooled is a basic requisite (no contact with air is allowed) and where the focus is oriented on energy and water savings. All models are totally pre-assembled in our workshop.

    By MITA S.r.l. based in Siziano (PV), ITALY. from Closed Circuit Cooling Towers Product line

  • Model PME-E - Open Circuit Cooling Towers

    PME-E series is suggested in medium/big size plants, all models K12 version are EUROVENT Certified. Capacity: from 860 kW to 2,6 MW. Directly coupled axial motor-fan group/s, low installed power, low noise levels. IP56 motors, lockable isolating switch pre-wired to the motor-fan group/s to facilitate the final installation. Casing made of ...

    By MITA S.r.l. based in Siziano (PV), ITALY. from Open Circuit Cooling Towers Product line

  • Cooling Towers

    Cooling towers represents the largest use of water in industrial and commercial applications. Cooling towers remove heat from air conditioning systems and from a wide variety of industrial processes. While all cooling towers continually cycle water, they can consume 20 to 30 percent, or more, of a facility’s total water use. Optimizing ...

    By Water Management, Inc. (WMI) based in Alexandria, VIRGINIA (USA).

  • AmTreat - Model 1250 - Cooling Tower Scale & Corrosion Inhibitor

    AmTreat 1250 is a concentrated liquid scale and corrosion inhibitor. It is designed for use in a wide range of open recirculating cooling water systems where clean, scale and deposit-free surfaces are required for maximum system life and efficiency. AmTreat 1250 accomplishes this with one easy to use product. AmTreat 1250 is used for corrosion and ...

    By AmSolv based in Waxahachie, TEXAS (USA). from Cooling Water Treatment Product line

  • WHS - Model C100 - Cooling Tower

    C100 is an economical silicate based corrosion inhibitor product for use in cooling towers operating with softened water.C100 is highly effective for eliminating the corrosion potential of softened water. High stability polymers and scale inhibitors have also been incorporated into the product to help maintain clean heat transfer

    By Water Hygiene Systems Ltd (WHS) based in High Wycombe, UNITED KINGDOM.

  • Cannon-Water - Model CW409 - Cooling Tower Treatment

    Concentrated: 7.5 ounces treats 1000 gallons of cooling tower makeup water at 3-cycles of mineral concentration. Can be tested in less than 30-seconds with a simple test kit. Contains a powerful blend of organic phosphonates with polymeric dispersants/crystal modifying compounds for control of scale in cooling systems with extreme hard and ...

    By Cannon Water Technology Inc. based in Granite Bay, CALIFORNIA (USA). from Water Treatment Chemicals - Cooling Water Treatment Product line

  • Cannon-Water - Model CW509 - Maximum Cycle Cooling Tower Treatment Chemicals

    Super concentrated: 2.5 ounces treats 1000 gallons of cooling tower makeup water at 3-cycles of mineral concentration. Can be tested in less than 30-seconds with a simple test kit. Contains a powerful blend of organic phosphonates with polymeric dispersants/crystal modifying compounds for control of scale in cooling systems with extreme hard and ...

    By Cannon Water Technology Inc. based in Granite Bay, CALIFORNIA (USA). from Water Treatment Chemicals - Cooling Water Treatment Product line

  • Treatment of Cooling Tower Make-Up Water & Raw Water

    Berkefeld delivers compact systems for the treatment of all types of raw water used in power plants: Drinking water, River water, Surface water, Sea water, Well water.

    By Veolia Water Technologies based in Saint-Maurice, FRANCE. from Power & Chemical Industry Product line

  • BONO ARTES - Cooling Water Filtration

    Water is by far the preferred cooling medium because of its chemical-physical properties. In particular when evaporative cooling towers are used, water is regularly added (Make-Up) to compensate the losses due to the evaporation in the cooling tower and the losses from the circuit to keep the chemical-physical characteristics of the circulating ...

    By Artes Ingegneria SpA based in Peschiera Borromeo, ITALY.

  • Fixed Evaporator

    Recover up to 95% of industrial wastewater as high purity distillate. GE's vertical tube, falling film brine concentrators, and evaporators can recycle wastewater into a high-purity distillate that can be used for boiler and cooling tower makeup, flue-gas desulfurization (FGD) blowdown, NOx control, and process use. The remaining 5% is a slurry ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wastewater Evaporators Product line

  • SilFlo Technology

    SilFlo is a process incorporating a suite of technologies designed to selectively remove silica and other scaling components from waters in industrial heat exchange processes. This technology is ideally suited for applications in Once Through Steam Generator feed water, boiler feed makeup water, cooling tower blowdown water and deep hole injection ...

    By Drake Water Technologies, Inc. based in Helena, MONTANA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you