Only show results in Texas? Ok

fills for cross-flow cooling tower (Cooling Towers) equipment

  • Premium

    ENEXIO - 2H Fills and Nozzles For Cross-Flow Cooling Towers

    Optimal heat transfer properties – low pressure drop; Generally, every cross fluted fill could be cut to be installed in a cross-flow cooling tower. Such a fill, however, would not perfectly fit the requirements; we therefore developed a special range of fill for this type of tower (FX12.12 or KSN with a drift eliminator section KSA and air ...

  • Premium

    2H Plasdek - Counter-Flow Cooling Tower Fills

    Different Types For All Requirements – Available In PVC And PP; From small cooling towers to large cell and natural draught cooling towers: Our PLASdek packings fulfill all requirements. Different types of film fills with large specific surface are highly suited for clean and medium water qualities, whereas for special operation conditions ...

    By ENEXIO Water Technologies GmbH based in Hürth, GERMANY. from Counter-Flow Cooling Tower Fills Product line

  • Premium

    2H PLASdek / CLEANdek - Model KBC 320 / KVC 319 - Vertical Flow Fills

    2H PLASdek and CLEANdek vertical flow fills are designed for the use in counterflow cooling towers with poor water quality. With different types in PP, PVC and PPHT and different material thickness, our fills cover all customer requirements. Fill media in flame retardant or anti-bacterial types are available on request. 8earing capacity and ...

    By ENEXIO Water Technologies GmbH based in Hürth, GERMANY. from Vertical Flow Fills Product line

  • Model XFR Series - Cross Flow Cooling Tower

    Don't let water quality challenges slow you down; combine our splash fill or film fill with the time-tested reliability of a Redwood structure in this heavy-duty crossflow tower. If you're battling poor water quality, splash fill can help you overcome your cooling challenges. Because splash fill interrupts water's vertical progress by allowing it ...

    By Cooling Tower Depot Inc. based in Golden, COLORADO (USA). from Cross Flow Cooling Tower Product line

  • Premium

    ENEXIO - 2H Drift Eliminators

    In all different types of cooling towers drift eliminators are used to reduce the loss of water and emissions. Above the water distribution and the cooling fills, a layer of drift eliminators is installed for this purpose. It catches the water drops which are carried away with the air flow and redirects them into the cooling water circuit.

    By ENEXIO Water Technologies GmbH based in Hürth, GERMANY. from 2H Drift Eliminators Product line

  • Counter- and Cross-flow Packing for Cooling Towers

    The fill-forming plastic packing can be applied well in recirculating water cooling systems of counter-flow wet cooling towers.The fill-forming plastic packing can be applied well in recirculating water cooling systems of counter-flow wet cooling towers. The application of the packing enables the users to maintain energy- and water-saving ...

    By Pandan Kft. based in Szombathely, HUNGARY.

  • Model RM Series - Cooling Towers

    RM series are induced draught cooling towers, counter-flow with axial fans. These are high efficiency equipments, capable of cooling flows from up to 1.700 m3/h per cell. Their design and conception is focused on industrial processes, where, depending on the selected type of fillings, any water qualities can be treated. Its structure covered with ...

    By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Cooling Towers Product line

  • Model OC Series - Cooling Towers

    OC series are induced draught cooling towers, counter-flow with axial fans. We are talking about equipments capable of cooling flows from up to 5.500 m3/h per cell, which makes them suitable for industrial processes. Depending on the selected type of fillings, they are prepared to cool any water quality. Its concrete structure can be covered with ...

    By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Cooling Towers Product line

  • ECODYNE - Counterflow Cooling Towers

    The Counterflow film fill cooling tower is the design most frequently specified by purchasers. Lower capital cost, generally lower evaluated operating cost, the Counterflow film fill tower uses high efficiency PVC film fill. Intended for industrial applications where water quality is controlled, the Counterflow film fill tower provides a low ...

    By Ecodyne Ltd based in Burlington, ONTARIO (CANADA). from Counterflow Cooling Towers Product line

  • Crossflow Cooling Towers

    The crossflow splash fill cooling tower utilizes open pan hot water distribution and crosscurrent air / water contact. Like the counterflow splash fill tower, this is best suited for applications where water quality is not controlled. Generally rated as higher capital and operating cost, this selection is best suited for special applications. ...

    By Ecodyne Ltd based in Burlington, ONTARIO (CANADA). from Crossflow Cooling Towers Product line

  • OPTI-PAC - Model 1900 - Cross Fluted Film Fill Media

    Opti-Pac 1900 is a cross-fluted film fill media manufactured from rigid PVC sheets conforming to CTI STD-136 for cooling tower heat transfer applications. The media is fabricated from corrugated PVC sheets that are solvent welded for maximum strength and resistant to UV, rot, fungus, organic / inorganic solvents, acids, alkalis and chemicals ...

    By Tower Components, Inc. based in Ramseur, NORTH CAROLINA (USA). from Cross Fluted Film Fill Media Product line

  • Opti-Pac - Model 3000 - Cross-Fluted Film Fill Media

    Opti-Pac 3000 is a cross-fluted film fill media manufactured from rigid PVC sheets conforming to CTI STD-136 for cooling tower heat-transfer applications. The media is fabricated from corrugated PVC sheets that are solvent welded for maximum strength and resistant to UV, rot, fungus, organic / inorganic solvents, acids, alkalis, and chemicals ...

    By Tower Components, Inc. based in Ramseur, NORTH CAROLINA (USA). from Cross-Fluted Film Fill Media Product line

  • OPTI-PAC - Model 1200 - Cross Fluted Film Fill Media

    Opti-Pac 1200 is a cross-fluted film fill media manufactured from rigid PVC sheets conforming to CTI STD-136 for cooling tower heat-transfer applications. The media is fabricated from corrugated PVC sheets that are solvent-welded for maximum strength and resistant to UV, rot, fungus, organic and inorganic solvents, acids, alkalis, and chemicals ...

    By Tower Components, Inc. based in Ramseur, NORTH CAROLINA (USA). from Cross Fluted Film Fill Media Product line

  • OPTI-PAC - Model 1900 XF/IL/IDE - Cross Fluted Film Fill Media

    Opti-Pac 1900 XF/IL/DE (XF = cross cut / IL = integrated louver / IDE - integrated drift eliminator) is a cross-fluted film fill media manufactured from rigid PVC sheets for cross-flow cooling tower heat-transfer applications. The media is fabricated from corrugated PVC sheets conforming to CTI STD-136 that are solvent-welded for maximum strength ...

    By Tower Components, Inc. based in Ramseur, NORTH CAROLINA (USA). from Cross Fluted Film Fill Media Product line

  • Model M Series - Cooling Towers 10 to 175 Ton

    Our energy-efficient Metal Series induced-draft designs are pre-assembled, and feature galvanized components and PVC fill for corrosion protection. Energy-efficient Metal Series induced-draft cross flow towers are pre-assembled, and feature galvanized components and PVC fill for corrosion protection. The metal Series feature Thermostat-controlled ...

    By ACS Group based in New Berlin, WISCONSIN (USA). from Cooling Towers 10 to 175 Ton Product line

  • Site-Erected Cooling Towers

    Site-erected cooling towers are preferred in facilities with a water flow rate over 200m³/hr. Usually, these are large plants with high water flow rate, such as, power plants, petrochemicals plants, refineries and steel mills. These cooling towers are constructed with a structure of columns and beams. Their parts are assembled on-site. In ...

    By YOLYAPI A.S. based in Istanbul, TURKEY.

  • Model PMM Series - Open Circuit Cooling Towers

    PMM are open circuit cooling towers of counter-flow composed of factory pre-assembled modules. Its capacity goes from 2.6 to 14 MW (aproximate value, taking as a reference a cell, a thermal range of 5ºC, laminar filling of 19 mm and modular systems). The PMM series is proposed in big-size plants. Each unit is engineered according to the ...

    By Torraval Cooling S.L - part of The MITA group based in LEIOA (Vizcaya), SPAIN. from Open Circuit Cooling Towers Product line

  • Model DL-FRP F Series - Modular Packaged Tower

    Complete FRP Modular Packaged Cooling Tower. Film fill tower series available in a wide array of flows and design conditions.

    By Cooling Tower Depot Inc. based in Golden, COLORADO (USA). from Modular Packaged Tower Product line

  • Wcn - Counter Flow Induced Draft Modular Cooling Tower

    WCN Cooling Towers are the result of extensive research, development and testing. The high-performance, reliable and cost-effective components, designed at state of the art technology results in an excellent cooling tower line you can rely on.WCN Cooling Towers are designed according international industrial standards. The structure is lightweight ...

    By Wacon International Pte. Ltd. based in Singapore, SINGAPORE.

  • Curtis - 2″ Variable Flow Nozzle

    The Variable Flow Nozzle is a 2″ NPT threaded nozzle that is designed to work in counter flow cooling towers. The spring loaded design allows the orifice of the nozzle to adjust based on the pressure being supplied to the nozzle. The nozzle sprays in a 3' x 3' SQUARE pattern which provided uniform fill media coverage.

    By Curtis Technologies Inc based in Oklahoma City, OKLAHOMA (USA). from 2″ Variable Flow Nozzle Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you