cyclone systems Applications available in Tuvalu
-
Premium
Product Recovery Solutions for Food Ingredients
Efficient recovery of active pharmaceutical ingredients(APIs), chemical substances or food powdersafter drying applications such as spray and fluid bed dryingis frequently a problem. The same problem occurs in many milling and micronization applications. The preferred way to recover these sensitive products is with cyclone collectors due to their direct powder capture. Unlike bag filters or wet scrubbers, cyclones minimize filter or product contamination and product cross contamination and can easily handle a wide ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Coriolis Air Sampler for Research and Development
Coriolis air sampler collects biological particles in the air for fundamental research on biological airborne ...
By Bertin Technologies based in Montigny-le-Bretonneux, FRANCE.
-
Premium
Emission control solutions for oil & gas industry
In Fluid Catalytic Cracking (FCC) processes, widely used in oil refineries, the separation and recovery of powder catalysts is a major concern. Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn't represent any environmental harm in the past, they were not controlled by any separator or filter. Plant managers main concern was to clean a fraction of the gas to produce energy in a Turbo Expander, or similar, while concentrating the ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Emission control solutions for glass and ceramic furnaces sector
Glass and ceramic furnaces are typically associated with emissions of very fine particles (less than 5µm) in combination with high temperatures and load. An increasingly higher number of furnaces are powered with biomass fuel, further raising the level of particulate emissions that need to be treated, in order to comply with stricter regulatory limits. Solving this problem may or not require a two stage dedusting system such a cyclone pre-separation system followed by an ESP. Client's needs ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Product Recovery Solutions for Milling and Drying Processes
Efficient recovery of active pharmaceutical ingredients (APIs), chemical substances and food powders after drying applications such as spray and fluid bed drying is frequently a problem. The same problem occurs in many milling and micronization ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Product Recovery Solutions for Fertilizers
The recovery of fertilizers typically after drying tunnels or drum dryers is associated with a high load of particulates and very humid gas streams. The recovery of these products is commonly performed by dryer cyclones as they allow for a direct powder capture and avoid filter clogging due to condensation. Arrangements with cyclones and/or with bag filters are usual in the industry. Client's needs include a low maintenance high efficiency cyclone system that is efficient enough to comply with regulatory PM limits ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Emission control solutions for clinker cooler and pre-heater dedusting sector
The control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler, is usually a problem for cement plant managers. The process is characterized by high material abrasiveness, high loads and variable flow rate in normal and maximum ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Filter solution for hydrochloric acid / process scrubbers / tank venting sector
Process Information: Hydrochloric Acid can be emitted from many industrial processes, where it is either used in that form, stored with tank ventilation, or generated from the process. HCl will usually be in fine, sub-micron mist form. The gas comes from the process or vapours are drawn from the tank into a scrubber by a suction ...
By Begg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM.
-
Diesel Air Filter Cleaning
HOW THE GREEN FILTER CLEANING MACHINE WORKS Easy to load, automatic and programmable cleaning cycles, filters cleaned in 3 to 5 minutes. Dry compressed air cleans filters from the inside out. Pollutant dust is safely captured with our powerful cyclone collector than safely stored in a supplied 55gal drum. Filter Inspection Station available, recommended for air intake filters used in Diesel Engines, measure restriction levels of air filters to confirm filters integrity Filter Inner Diameter: 6.5' Minimum for inner ...
By Diversitech based in Montreal, QUEBEC (CANADA).
-
Metals & mining solutions for the iron & steel industry
The primary metals manufacturing industry includes iron & steel production. A variety of clean air solutions are required for capturing, conveying, and collecting emissions from steel rolling mills, including fume exhaust, ventilation and process cooling systems. The iron & steel industry also requires technologies for product recovery, along with dampers and expansion joints, and pumps and ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Hydrocyclones for chemical plants applications
KREBSĀ® hydrocyclones, including Krebs gMAX hydrocyclones, are simple, yet highly effective equipment for removing and / or concentrating solids in chemical ...
By FLSmidth based in Tucson, ARIZONA (USA).
-
Industrial dedusting
The industrial dedusting field is very varied and branches out in numerous specialized branches. For a preliminary examination of the problem it is necessary to dispose of two series of data: characteristics of the system which emits the pollutants; nature of pollutants and their ...
By GGE srl based in Rio Saliceto (Reggio Emilia), ITALY.
-
Applications and Air Pollutants Removed in the Energy (Power) Industry
Wet scrubbers and Wet electrostatic precipitators for removal of sulfur dioxide and trioxide, ash particulate, NOx and mercury from coal fired boilers. Sulfur dioxide, NOx and particulate from oil fired boilers and diesel engines. Ash particulate from Biomass boilers including Bagasse type. Complete scrubber systems for sulfur dioxide removal using lime, limestone to gypsum quality and all sodium, magnesium and potassium chemistry scrubbing solutions including ammonia for ammonium sulfate production. For gypsum ...
By Bionomic Industries Inc based in Mahwah, NEW JERSEY (USA).
-
Industrial manufacturing solutions for the pulp & paper industry
Paper manufacturing involves many chemical processes that drive the emission of nitrogen dioxide (NO2), sulfur dioxide (SO2), and carbon dioxide (CO2). Nitrogen dioxide and sulfur dioxide are major contributors of acid rain, whereas CO2 is a greenhouse gas responsible for climate change. In addition, wastewater discharge for pulp and paper mills often contains alcohols, chelating agents, and inorganic materials like chlorates and transition metal compounds. Furthermore, chlorine and compounds of chlorine are used ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Metals & mining solutions for the aluminum sector
The primary metals manufacturing industry includes aluminum production. A variety of clean air solutions are required for capturing, conveying, and collecting emissions from aluminum rolling mills, including fume exhaust, ventilation and process cooling systems. The aluminum industry also requires technologies for product recovery, along with dampers and expansion joints, and pumps and ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Metals & mining solutions for the mining & quarries industry
Mining & Quarrying involves the extraction of valuable minerals or other geological materials from the earth, including metals, coal, oil shale, gemstones, limestone, dimension stone, rock salt, potash, gravel, and clay. CECO has the proven expertise to deliver proven products and systems for a wide range of emission control, air filtration and fluid handling challenges including volatile organic compound (VOC) abatement systems; dampers and expansion joints; dry particulate filtration; industrial dust, fume, ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Miscellaneous solutions for the food & beverage industry
The food manufacturing industry contains companies involved in processing raw food materials, packaging, and distributing them. This includes fresh, prepared foods as well as packaged foods. CECO delivers proven products and systems for a wide range of emission control, filtration and fluid handling challenges including volatile organic compound (VOC) abatement; mist elimination; acid gas scrubbing; dry particulate filtration; industrial dust; fume, mist and air handling systems; fluid handling; filtration; and ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Dust Collector Cartridge Filter Cleaning
The Green Filter Cleaning Machine effectively and safely cleans your air filters. The recycling of dirty cartridge filers translates into immediate ROI as filters can be reused 3-6 times, depending on application.? Ideal for cleaning dust collector filters, diesel engine intake filters, or any cartridge with an inner diameter greater than 6.5' and an outer diameter less than 20'. The Green Filter Cleaning Machine will accept filter heights up to 32' (40' extended unit available). The filter cleaning mechanism ...
By Diversitech based in Montreal, QUEBEC (CANADA).
-
Air Pollution Control Solutions for Pulp and Paper Industry
AirPol’s vast amount of experience in creating custom solutions for the process in front of air pollution control (APC) systems gives us a decided edge in designing the appropriate APC ...
By AirPol based in Pittsburgh, PENNSYLVANIA (USA).
-
Trombia Sweeper for Milling Sites
Waterless Trombia sweeping brings superior efficiency to milling ...
By Trombia Global based in Kuopio, FINLAND.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you