Diesel Particulate Equipment For Air And Climate Available In Kansas
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DPF/SCR &ASC/DOC System Stationary Source ...
-
PremiumManufactured by Truxor Wetland Equipment ABbased in SWEDEN
T50 – the most powerful Truxor for power-demanding tools. The Truxor T50 is the most powerful machine in the T-Series, equipped with a 58,6 hp diesel engine that meets the highest environmental class standards EU Stage V and EPA Tier 4. The powerful engine and a new hydraulic system guarantees the highest levels of performance and operational reliability for your job. Truxor T50 easily ...
-
Manufactured by Logical Clean Air Solutionsbased in USA
Our diesel particulate filters utilize Advanced Cordierite or Aluminum Titanate wall-flow monoliths to trap the soot produced by diesel engines. The cylindrical filter element consists of many square parallel channels running in the axial direction, separated by thin porous walls. The channels are open at one end, but plugged at the other. This way the particle laden exhaust gases are forced to ...
-
Manufactured by CPK Automotive GmbH & Co KGbased in GERMANY
By shutting down the engine in idle mode, fuel is saved and the environment is protected. The installation of DYNTEST IdleControl ensures that the engines are switched off automatically in areas where they are not permitted to run in idle mode for an extended period of time. This becomes more and more obligatory due to regulations or laws. Fuel consumption and harmful exhaust gases are reduced ...
-
Manufactured by Mirenco Inc.based in USA
The affordable C-Max system prevents excess, unburned diesel fuel from spewing out the tailpipe as soot, by delivering only as much fuel as the engine needs. C-Max accomplishes this through a solid state, electronic throttle delay and throttle stop that can easily be programmed with a hand-held ...
-
Manufactured by Case Construction Equipment, Inc.based in USA
The TR310 is the most powerful and efficient medium-frame compact track loader in our lineup. Building upon the strength and popularity of our TR270, the TR310 offers best-in-class power thanks to larger lift cylinders as well as a maintenance-free Tier 4 Final emissions solution. It's also designed with wider tracks to improve stability and lower ground pressure down to an impressive 5.0 psi ...
-
Manufactured by Dinex A/Sbased in DENMARK
The primary function of a DPF is to trap and reduce particulate matter mass (PM) in the diesel exhaust by > 95 % and the particulate number (PN) by > 99 % at the cost of minimal possible back pressure and should be able to sustain high thermal ...
-
Manufactured by Catalytic Exhaust Products LTDbased in CANADA
Catalytic Exhaust Products Ltd. has been supplying high quality and cost competitive after market Diesel Particulate Filter (DPF) for over 25 years. Our Diesel Particulate Filter (DPF) product lines are for all types of off-highway machinery, including construction, mining, earthmoving and material handling vehicles, and portable equipment. With our advanced Diesel Particulate Filter (DPF) ...
-
Manufactured by Ust Sensor Technic Co., Ltdbased in USA
GPF(Gasoline Particulate Filter)is a ceramic filter installed in a gasoline engine exhaust system, which has essentially the same DPF filtration mechanism as a diesel engine, can capture particulate particulate matter before it enters the ...
-
based in GERMANY
The GRIMM 5430 is a high accuracy stationary particle counter for automotive emission measurements with improved response time (t10-t90 < 3 s) and an aerosol flow rate of 0.6 L/min. The instrument complies to the GPRE particle measurement program (PMP) for Euro 5 and 6 regulation 83. The new detection head enables single particle counting up to 50 000 particles /cm³ with a coincidence ...
-
Manufactured by Dinex A/Sbased in DENMARK
The primary function of DPF in a Diesel ATS is to trap and oxidise the soot particulates in the exhaust. The DPFs are typically coated with a low PGM content wash coat and are typically known as catalysed DPFs (C-DPF) to ensure further oxidation of NO towards NO2 within DPF and to assist in keeping the soot amount in DPF below the designated level. Dinex DPF coating technologies are based on a ...
-
Manufactured by Katconbased in MEXICO
Full hot end including exhaust manifolds (cast iron, stainless steel tubular or clamshell designs), down pipes, decoupling elements, under floor converters and diesel filters. Packaging and integration of all elements to meet performance and durability requirements. Computer analysis is used to optimize the system’s performance. Validation testing is used to confirm the ...
-
Manufactured by Diamond Water Systems Incbased in USA
Commercial and municipal swimming pools need trouble-free and long-lasting filtration systems that virtually eliminate down time and maintenance troubles. Diamond Water Systems, Inc. understands this and offers high quality swimming pool filtration (SPF Series) systems that are engineered with the customer in mind. Our advanced swimming pool filtration systems are custom designed and built to fit ...
-
Manufactured by ARS Recycling Systems, LLCbased in USA
ARS Recycling Systems manufactures the highest quality Dust Collecting Systems in the industry. With value added solutions such as side loaded cartridges and vertical cartridge placement, ARS is leading the way in Industrial Dust Collection and Removal. 9,000 CFM @ 13” wg. 12’ Skid. 2 @ 20” Rear Inlets. Class “C” Spark Resistant Fan. Diesel or ...
-
Manufactured by Hitachi Construction Machinery Co, Ltdbased in USA
Full of productivity-boosting advantages, the ZX250LC-6 delivers more efficiency, reliability, and durability. Front and center is a new, fuel-efficient EPA Final Tier 4 (FT4)/EU Stage IV Isuzu engine that meets rigid emission standards – no diesel particulate filter needed. Plus, you’ll get generous swing torque, dig force, and lift capacity. The spacious cab is designed for ...
-
based in CHINA
Diesel Particulate Filters has succesefully installed in cars, buses, trucks, and various construction machinery vehiles, DPF's life WITHIN the 300, 000km, collection efficiency range 97percent. Heat regeneration is made through the displacement management, and the ashes left from the regeneration shall be cleaned regularly. Systematic designs are available upon customers' requirements, so as to ...
-
Manufactured by Salmon River Innovations Inc.based in USA
The 12" Extension Shaft is designed for optimal cleaning of diesel engine air filters or any canister style air filters with an overall inside HIEGHT of over 26". This 12" Extension Shaft is sold separately from the Portable Unit which, comes with (2) 12" shafts standard for cleaning diesel engine air filters or any other canister style air filters up to 26" so the operator can customize his/her ...
-
Manufactured by Air Technology Solutionsbased in USA
Regular unit designed to fit most ...
-
Manufactured by KnitMesh Technologiesbased in UNITED KINGDOM
KnitMesh Technologies wire mesh catalytic converter seals & mesh wraps are used to protect the delicate honeycomb ceramic brick within a catalytic converter from shock and vibration ...
-
Manufactured by AirFlow Catalyst Systems, Inc.based in USA
The Mine Safety and Health Administration (MSHA) ranks Airflow Catalyt’s Diesel Particulate Filters ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you