Diesel Particulate Equipment For Air And Climate In Denmark
-
Manufactured by C.C. Jensen A/Sbased in DENMARK
The CJC Lube Oil Filter for 2-stroke diesel engines is tailored for cleaning the lube oil on low speed crosshead 2-stroke diesel engines with continuous power rating up to 20,000 kW. ...
-
Manufactured by Dinex A/Sbased in DENMARK
The primary function of DPF in a Diesel ATS is to trap and oxidise the soot particulates in the exhaust. The DPFs are typically coated with a low PGM content wash coat and are typically known as catalysed DPFs (C-DPF) to ensure further oxidation of NO towards NO2 within DPF and to assist in keeping the soot amount in DPF below the designated level. Dinex DPF coating technologies are based on a ...
-
Manufactured by Dinex A/Sbased in DENMARK
The primary function of a DPF is to trap and reduce particulate matter mass (PM) in the diesel exhaust by > 95 % and the particulate number (PN) by > 99 % at the cost of minimal possible back pressure and should be able to sustain high thermal ...
-
Manufactured by HUSSbased in GERMANY
The MD-system regenerates during driving operations either active or passive. When the exhaust gas temperature is sufficient the filter regenerates passive. If the temperature is not high enough, the filter can be regenerated actively on the base of engine external diesel post injection. A diesel oxidation catalyst, upstream the particulate trap, provides the necessary temperature increase. ...
-
Manufactured by HUSSbased in GERMANY
The MC-systems wins over its simplicity. After an easy integration into the exhaust line the system simply does its job. The surface of the channels of the particulate trap are coated with a thin layer of precious materials. The catalytic effect enables to burn soot below the regular soot ignition temperature. Two assumptions needs to be achieved compulsory: the exhaust gas temperature needs to ...
-
Manufactured by HUSSbased in GERMANY
The filter gets loaded with soot during driving operations. Consequently the backpressure is rising which indicates the load level of the filter. The HUSS control monitors the main conditions of the filter continuously. When the maximum allowed backpressure level is reached, the HUSS control alerts the driver and the filter needs a regeneration. The regeneration starts by pushing a button while ...
-
Manufactured by SAXON Junkalor GmbHbased in GERMANY
EMISSION TESTER FOR COMBUSTION ENGINES The Infralyt N is used for fast, comprehensive analysis of diesel exhaust gases. With its own development of a special NDIR bench with high precision, the gases CO, CO2 and HC can be measured in the respective ranges. The integration of electrochemical cells for fast NO, NO2 and O2 measurement allows to take a statement to the actual pollutant level. Due to ...
-
Manufactured by HUSSbased in GERMANY
he W-system consists of an exhaust inlet chamber that is installed at the vehilce. Furthermore the filter cartridges and the external regeneration oven are part of the system. The W-system is ideal for engines up to 100 kW performance. In case a twin-system can be installed the engine performance is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you