Dioxins And Furans Monitoring Equipment For Air And Climate Available In Russia
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Automatic Dioxin Sampling System GT90 Dioxin+ is a future-proof solution for a long-term sampling of dioxin emissions in conformity to the European standards EN1948-1 and EN15267. The system represents the cutting-edge technology for dioxin sampling and fulfills all the requirements of the dioxin measurement ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous dioxin and furan emission monitoring by long-term sampling. TÜV and MCERTs certified, ETV EPA approved. The AMESA-D utilizes the water cooled probe method with Isokinetic sampling system coupled with XAD-II adsorbent cartridge for Long-term sampling of dioxins (PCDD), furans (PCDF) and other persistent organic contaminant (POPs). AMESA-D is the most utilized dioxin monitoring ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Mercury Monitoring systems CMM AutoQAL and CMM systems are the perfect solutions for monitoring mercury continuously from hot, wet and corrosive gas streams. These future-proof systems have the lowest certified range in the world (0-5 µg/m3) and CMM AutoQAL has an automatic and integrated QAL3 validation ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Emission Monitoring System CEMS II e offers modular and TÜV and MCERTS certified (QAL1) solution for environmental compliance in industrial processes, such as powerplants, waste incineration, cement plants and beyond. The system adjusts to changes in regulations and future advances of emissions monitoring best practices with ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Compact Method 23 sampling system is utilized for US EPA Method 23 Determination of Dioxins and Furans from stationary sources. Dioxins and furans are an unwanted by-product of combustion processes such as municipal and industrial waste, wood and oil ...
-
Manufactured by Santes Incineratorbased in TURKEY
The reactor relies on active carbon as absorption medium for the reaction to adsorb heavy metals and dioxin &furans. Dioxins and furans, having been destroyed in the post combustion chamber, can form again in the subsequent heat exchanger because of the cooling procedure. Activated carbon is added to the lime to absorb dioxins and ...
-
Manufactured by Addfield Environmental Systems Limitedbased in UNITED KINGDOM
Powdered Activated Carbon (PAC) injection is widely used method to control heavy metals and dioxins emissions. The porous structure of carbon makes it an ideal solution for absorption and it can be injected directly into the flue gas stream or laid in beds for the flue gas to pass through. The injection temperatures, feed rate, material porosity and subsequent capture method determine the ...
-
Manufactured by Shinhan Techbased in SOUTH KOREA
Sampling Unit. Designed for outdoor mounting. Distance between Sampling and Control Units can be up to 100m. There is no need to put in or out the stack for each sampling. Easy substitution of filter holder cartridge, adsorbing trap and collection ...
-
Manufactured by Gen2WTEbased in USA
Gen2MSW cleanly converts Municipal Solid Waste (MSW), medical waste, organic waste, biomass, sewage, oily sludge, agricultural plastics and mixed plastics into electricity and fuels, ASTM Grade Diesel for one, using a pyrolysis process paired with state of the art emissions control technology. Gen2MSW efficiently accomplishes this processing by utilizing a proprietary materials sorting system ...
-
Manufactured by Sigma-Aldrichbased in USA
L × I.D. 60 m × 0.25 mm, df 0.20 μm Application: A highly polar cyanosiloxane column specially tested for analyses of dioxins, specifically tetrachlorodibenzodioxin (TCDD) isomers. Because the phase is stabilized, it has a maximum temperature slightly higher than non-bonded cyanosiloxane columns USP Code: none Phase: • Stabilized • Proprietary Temp. Limits: • ...
-
Manufactured by Sigma-Aldrichbased in USA
L × I.D. 60 m × 0.32 mm, df 0.20 μm Application: A highly polar cyanosiloxane column specially tested for analyses of dioxins, specifically tetrachlorodibenzodioxin (TCDD) isomers. Because the phase is stabilized, it has a maximum temperature slightly higher than non-bonded cyanosiloxane columns USP Code: none Phase: • Stabilized • Proprietary Temp. Limits: • ...
-
Manufactured by OMNI Conversion Technologies Incbased in CANADA
Omni CT has commercialized a truly Omnivorous waste conversion system to produce a valuable Syngas. OmniSyngas is a refined gas tailored to a wide range of applications. We do this using our Omni CT syngas cooling and conditioning suit. ...
-
Manufactured by General Carbon Corporationbased in USA
GC Powdered FG activated carbon is a virgin carbon. Derived from selected grades of bituminous coal, its surface area and pore volume make it ideal for use on flue gas applications, including the removal of mercury, dioxins, furans and other VOC ...
-
based in USA
In early 2010, we recognized an enormous and rapidly growing need for an innovative solution to address the challenges of waste destruction. Since 1995, more than 99% of the medical waste incinerators in the US have been closed. The trend was obvious. The need for an environmentally safe technology for the destruction of medical waste had become a mandate across the country. We have the solution. ...
-
Manufactured by Cytivabased in USA
Whatman Grade GF 9 glass microfiber filters from Cytiva Healthcare’s Life Sciences business are strengthened with an inorganic binder for environmental analysis of coarse, heavy ...
-
Manufactured by Jinan Hanon Instruments Co., Ltd.based in CHINA
Hanon Auto SPE makes every step of solid phase extraction integrated on one platform, which can realize operation of the whole extraction process (activation, sampling, rinsing, drying, elution), and largely improved the efficiency of the sample pre-treatment, make the analysis workers relieve from the tedious pre-treatment work, and make the sample pre-treatment more quick and ...
-
Manufactured by Calgon Carbon Corporationbased in USA
FLUEPAC-B is a powdered reactivated carbon produced from bituminous coal specifically for use in flue gas treatment applications. Its surface area and pore volume make it very effective in removing many flue gas ...
-
Manufactured by GEA Bischoff GmbHbased in GERMANY
Polychlorinated dibenzodioxin and dibenzofuran (PCDD/F) occur in very small concentrations in the off gases of several industrial combustion processes in a temperature range of 200 to 400 °C. A typical dimension of the concentration of these substances within the off-gases is 2 to 4 n/gm³ TE*. This organic contamination is extremely toxic, is not decomposing in the nature and is ...
-
Manufactured by Caldo Consultantsbased in UNITED KINGDOM
Regulated Emissions to Atmosphere; Waste gases are often hot and, if they contain fume or dust, Caldo hot gas filters can be used to remove these solids before the gases are released to atmosphere. However, such gases often also contain other pollutants; hot gas filtration can be combined with other techniques to ensure that all of the controlled substances stay within regulatory ...
-
Manufactured by BioDetection Systems b.v.based in NETHERLANDS
BDS offers different products that have been optimized for the use together with our bioassays. Our columns that are extensively used in our dioxin analyses are tailor-made to ensure a fast running profile, easy cleaning ability and are robust in their use. The columns can be delivered along with a robust placeholder both for columns as well as for collection ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you