Dry Scrubbers Equipment For Air And Climate Available In Indonesia
-
Manufactured by China Xicheng EP Ltdbased in CHINA
There are several types of exhaust gas scrubbers including: Wet scrubbers: This type of scrubber uses water to remove pollutants from the exhaust gases. The contaminated water is then treated and the pollutants are removed before being released into the environment. Dry scrubbers: Dry scrubbers use chemicals to remove pollutants from the exhaust gases. The chemicals react with the pollutants to ...
-
Manufactured by PPC Industriesbased in USA
The PPC Industries Wet electrostatic precipitator (WESP) is used for particulate control, opacity control, and MACT Compliance. The WESP can operate either downflow, or upflow depending upon the gas stream characteristics. Pre or post treatment scrubbers can be incorporated into the design to accomplish acid neutralization or VOC removal. ...
-
Manufactured by CDC Dust Controlbased in SOUTH AFRICA
Control and suppress respirable dust particles in mines and other industrial settings with wet scrubber systems that offer easy, efficient, and effective dust control ...
-
Manufactured by Purafil, Inc. - Filtration Groupbased in USA
Corrosive gaseous contaminants of your compressor can inhibit air flow, impede heat dissipation, cause vibration and decreased efficiency. To protect your compressor from corrosion, Purafil offers a, a dry-chemical scrubber designed to remove corrosive gases from intake ...
-
Manufactured by Santes Incineratorbased in TURKEY
In dry scrubber the absorption agent (usually lime or sodium bicarbonate) is fed into the reactor as a dry powder. In the reactor, gaseous pollutants are absorbed by the agent. The dose rate of reagent may depend on the temperature as well as on reagent type. In the design of SANTES Flue Gas Treatments, generally sodium bicarbonate is used as the absorption agent. Absorption agent is applied ...
-
Manufactured by Pure Air Filtration, LLCbased in USA
The Sentry Emergency Gas Dry Scrubber from PureAir Filtration is the best line of defense against hazardous chlorine leaks at water treatment facilities. With only one moving part, the Sentry™ is safer and more reliable than old fashioned wet scrubber systems, requires less maintenance, is easier to operate, and costs less. If you currently have a wet scrubber system in place, call us ...
-
Manufactured by Parker - Hydraulic & Industrial Process Filtration Divisionbased in NETHERLANDS
Air compressors play an important role in an industrial environment, providing the compressed air to the pneumatic controls, valves, process applications, and various instruments throughout the plant. Corrosive gaseous contaminants in the intake airstream of your compressor can inhibit air flow, impede heat dissipation, and cause vibration. The end result: decreased efficiency. To protect your ...
-
Manufactured by Santes Incineratorbased in TURKEY
Wet scrubbers are used to absorb soluble gases into water or other liquids such as solutions and to remove particulates from gas streams by contacting with water or other liquid. The flue-gas flow is fed into water, hydrogen peroxide, or/and a washing solution containing part of the reagent (e.g. sodium hydroxide solution). In order to eliminate gaseous pollutants such as SO2, HCl, HF, flue gas ...
-
Manufactured by Mitsubishi Hitachi Power Systems, Ltd. (MHPS)based in USA
The Mitsubishi Hitachi Power Systems Enhanced All-Dry (EAD™) scrubber is a simple and flexible technology for multi-pollutant control. Obtained through a license agreement with Solios Environment (formerly Procedair), this patented dry scrubber technology was developed in the 1980s and is the original “Enhanced” All-Dry process. The process employs an entrained flow absorber, ...
-
Manufactured by Zanni Groupbased in GERMANY
Our filter units are of modular design. Several modules can thus form a filter system. By default, these are made up of 1-2-3 and 4 modules and so ...
-
Manufactured by Allied Furnaces Pvt. Ltd.based in INDIA
For HCl, Hg and Dioxin control, Regent system with lime and carbon dosing, Pneumatic conveying of regent, Surface adsorption by Pulse ...
-
Manufactured by Zanni Groupbased in GERMANY
A dry-scrubbing-solvent injection by means of a dosing station is used to remove particles and gases from the exhaust gas streams via dusted air filters. These dry scrubbing systems are used to remove corrosive and toxic gases (for example SO2 and HCl) from the exhaust gas. They are very effective with low investment and operating ...
-
Manufactured by Apzem India Engineeringbased in INDIA
Apzem VOC Scrubber are custom designed to capture and treat VOCs ( Volatile organic compounds) generated in industrial process. VOCs are organic compounds having very low boiling point, and becomes vapors at atmospheric condition. Not all VOCs are toxic but majority of them are toxic and should be controlled within the limits per PCB and EPA Norms. Toxic VOCs comes under the classification of HAP ...
-
Manufactured by Blowtech Engineers Private Limitedbased in INDIA
Dry Scrubbers are pollution control equipment used to remove contaminated particles from gaseous exhaust streams. This scrubber comprises a converging section, a throat (the narrowest part of the venture tube) and a diffuser. The gas/dust mix flows through the Venturi tube and reaches top speed in the throat section. Afterwards, the mixture passes into the diffuser where the speed drops again. ...
-
Manufactured by Diva Envitec Pvt Ltdbased in INDIA
Gas reactions are carried out in the presence of precious metal catalysts. Processes generate particles and the gases which are vented carry solids with them. These solids have to be recovered. CONTUFILT-MH metallic filters avoid poisoning of catalysts or recovery of products from the off-gas. ...
-
Manufactured by Integrity Municipal Systems (IMS)based in USA
The RJD-150 emergency chlorine scrubber is the next generation in emergency chlorine scrubber technology. It uses a new high capacity, non-hazardous dry adsorbent media to absorb up to 150 lbs (70 kg) of chlorine vapor, at leak rates up to 78 lbs/min as required by the Uniform Fire Code. The RJD-150 system is designed to maintain negative pressure in the chlorination and chlorine storage rooms, ...
-
Manufactured by Seah Green Tech. Corporation Ltd.based in SOUTH KOREA
Features: Selectively removes harmful gases of various types (organic, acidic, alkali, and toxic gases). Maintains high efficiency with a large adsorption area. Simple structure. Low pressure loss with special internal structure. Circular and rectangular designs depending on the installation area. Easy replacement and facility maintenance for activated carbon, impregnated activated carbon, and ...
-
Manufactured by Luehr Filter Australia Pty Ltd.based in AUSTRALIA
A Luehr KUV reactor coupled to a DF filter reliably cleans incinerator flue gas whilst minimising sorption consumption. The compact arrangement also allows for cost effective shipping to remote ...
-
Manufactured by Environmental Supply Company, Inc. (ESC)based in USA
The HGK-PFI turnkey system in a NEMA cabinet is a fully automated platform integrated system for CEM applications in industries needing proven reliability in sorbent trap monitoring of flue gas Mercury on a permanent ...
-
Manufactured by Ducon Technologies Inc.based in USA
Ducon supplies Semi-Dry Removal (SDR) type Dry Flue Gas Desulfurization (FGD) Systems as well as Dry Injection type systems. The SDR systems are custom designed to absorb gaseous pollutants utilizing a spray dryer and a baghouse filter. Ducon's specially designed air atomizing nozzles provide the liquid reagent slurry into the spray dryer for high efficiency removal of SO2, HCl, Mercury and other ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you