Dry Scrubbers Equipment For Air And Climate Available In Suriname
-
Manufactured by Purafil, Inc. - Filtration Groupbased in USA
Corrosive gaseous contaminants of your compressor can inhibit air flow, impede heat dissipation, cause vibration and decreased efficiency. To protect your compressor from corrosion, Purafil offers a, a dry-chemical scrubber designed to remove corrosive gases from intake ...
-
Manufactured by Mitsubishi Hitachi Power Systems, Ltd. (MHPS)based in USA
The Mitsubishi Hitachi Power Systems Enhanced All-Dry (EAD™) scrubber is a simple and flexible technology for multi-pollutant control. Obtained through a license agreement with Solios Environment (formerly Procedair), this patented dry scrubber technology was developed in the 1980s and is the original “Enhanced” All-Dry process. The process employs an entrained flow absorber, ...
-
Manufactured by Diva Envitec Pvt Ltdbased in INDIA
Gas reactions are carried out in the presence of precious metal catalysts. Processes generate particles and the gases which are vented carry solids with them. These solids have to be recovered. CONTUFILT-MH metallic filters avoid poisoning of catalysts or recovery of products from the off-gas. ...
-
Manufactured by Ab Alfaintek Oybased in FINLAND
Problems with pollutants and contaminants in any volumes of exhaust gas within the airflow can be solved with Alfaintek Dry Scrubbers. The Alfaintek Dry Scrubbers adsorb pollutants and contaminants from the exhaust gas during the operation of power plants. Chemicals in the exhaust gas can be kept free from contamination with the use of Dry Scrubbers. By preventing the contamination from ...
-
Manufactured by Blowtech Engineers Private Limitedbased in INDIA
Dry Scrubbers are pollution control equipment used to remove contaminated particles from gaseous exhaust streams. This scrubber comprises a converging section, a throat (the narrowest part of the venture tube) and a diffuser. The gas/dust mix flows through the Venturi tube and reaches top speed in the throat section. Afterwards, the mixture passes into the diffuser where the speed drops again. ...
-
Manufactured by Santes Incineratorbased in TURKEY
In dry scrubber the absorption agent (usually lime or sodium bicarbonate) is fed into the reactor as a dry powder. In the reactor, gaseous pollutants are absorbed by the agent. The dose rate of reagent may depend on the temperature as well as on reagent type. In the design of SANTES Flue Gas Treatments, generally sodium bicarbonate is used as the absorption agent. Absorption agent is applied ...
-
Manufactured by Integrity Municipal Systems (IMS)based in USA
The RJD-150 emergency chlorine scrubber is the next generation in emergency chlorine scrubber technology. It uses a new high capacity, non-hazardous dry adsorbent media to absorb up to 150 lbs (70 kg) of chlorine vapor, at leak rates up to 78 lbs/min as required by the Uniform Fire Code. The RJD-150 system is designed to maintain negative pressure in the chlorination and chlorine storage rooms, ...
-
Manufactured by Keppel Seghers Pte Ltdbased in SINGAPORE
Our dry scrubbing system is a highly flexible system for the removal of acid components, metals and dioxins from flue gases, resulting in very low emissions. The acid gas components are removed by neutralisation with hydrated lime – or an equivalent reagent – and simultaneously, the heavy metals and polyaromatic compounds are absorbed by activated carbon or (activated) lignite. The ...
-
Manufactured by PPC Industriesbased in USA
The PPC Industries Wet electrostatic precipitator (WESP) is used for particulate control, opacity control, and MACT Compliance. The WESP can operate either downflow, or upflow depending upon the gas stream characteristics. Pre or post treatment scrubbers can be incorporated into the design to accomplish acid neutralization or VOC removal. ...
-
Manufactured by Pure Air Filtration, LLCbased in USA
The Sentry Emergency Gas Dry Scrubber from PureAir Filtration is the best line of defense against hazardous chlorine leaks at water treatment facilities. With only one moving part, the Sentry™ is safer and more reliable than old fashioned wet scrubber systems, requires less maintenance, is easier to operate, and costs less. If you currently have a wet scrubber system in place, call us ...
-
Manufactured by CDC Dust Controlbased in SOUTH AFRICA
Control and suppress respirable dust particles in mines and other industrial settings with wet scrubber systems that offer easy, efficient, and effective dust control ...
-
Manufactured by Zanni Groupbased in GERMANY
Our filter units are of modular design. Several modules can thus form a filter system. By default, these are made up of 1-2-3 and 4 modules and so ...
-
Manufactured by Allied Furnaces Pvt. Ltd.based in INDIA
For HCl, Hg and Dioxin control, Regent system with lime and carbon dosing, Pneumatic conveying of regent, Surface adsorption by Pulse ...
-
Manufactured by Bionomic Industries Incbased in USA
Bionomic Dri-Scrub Dry and Wet/Dry Combination Scrubber Systems are available for gas flows from 160 to 75,000 acfm, provide particulate collection efficiencies between 98 and 99.9% on most applications, and are normally used for scrubbing fine particulate with acid gases. Dry systems utilize a dry venturi scrubber for rapid mixing of the containment gas with a sorption reagent and are followed ...
-
Manufactured by Parker - Hydraulic & Industrial Process Filtration Divisionbased in NETHERLANDS
Air compressors play an important role in an industrial environment, providing the compressed air to the pneumatic controls, valves, process applications, and various instruments throughout the plant. Corrosive gaseous contaminants in the intake airstream of your compressor can inhibit air flow, impede heat dissipation, and cause vibration. The end result: decreased efficiency. To protect your ...
-
Manufactured by Santes Incineratorbased in TURKEY
Wet scrubbers are used to absorb soluble gases into water or other liquids such as solutions and to remove particulates from gas streams by contacting with water or other liquid. The flue-gas flow is fed into water, hydrogen peroxide, or/and a washing solution containing part of the reagent (e.g. sodium hydroxide solution). In order to eliminate gaseous pollutants such as SO2, HCl, HF, flue gas ...
-
Manufactured by China Xicheng EP Ltdbased in CHINA
There are several types of exhaust gas scrubbers including: Wet scrubbers: This type of scrubber uses water to remove pollutants from the exhaust gases. The contaminated water is then treated and the pollutants are removed before being released into the environment. Dry scrubbers: Dry scrubbers use chemicals to remove pollutants from the exhaust gases. The chemicals react with the pollutants to ...
-
Manufactured by Luehr Filter Australia Pty Ltd.based in AUSTRALIA
A Luehr KUV reactor coupled to a DF filter reliably cleans incinerator flue gas whilst minimising sorption consumption. The compact arrangement also allows for cost effective shipping to remote ...
-
Manufactured by S.B Environmental Co, Ltd.based in CHINA
Dry Scrubbers are a diverse group of high technology air pollution control devices that can be used to remove some particulates and/or gases from industrial or medical exhaust streams.Dry Scrubber use adsorption technology to minimize and/or remove sulfur dioxide (SO2), hydrochloric acid (HCI), hydrogen fluoride (HF), and other acidic gaseous pollutants from gas ...
-
Manufactured by Zanni Groupbased in GERMANY
A dry-scrubbing-solvent injection by means of a dosing station is used to remove particles and gases from the exhaust gas streams via dusted air filters. These dry scrubbing systems are used to remove corrosive and toxic gases (for example SO2 and HCl) from the exhaust gas. They are very effective with low investment and operating ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you