Only show results in Texas? Ok

duct silencers equipment for Air and Climate

  • Premium

    CECO Burgess-Aarding - Flue Gas Silencer

    Our Burgess-Aarding brand Flue Gas Silencer is custom-designed to reduce noise levels of exhaust and heat recovery steam generator (HRSG) systems to meet stringent environmental standards. Whether the Flue Gas Silencer is mounted in a silencer duct, a hot or cold stack, or has to be able to operate in high flue gas velocities or elevated and ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Burgess-Aarding Product line

  • Premium Grade Silencer Filters

    Integrated Inlet Silencer and Filter. Shrinks Footprint. Lower Amp Draw / P. Differentiate Blower Pkg.

    By JB Systems, Inc. based in LaGrange, GEORGIA (US) (USA). from Air Filtration Product line

  • Glaunach - Inline Silencers

    It’s not just blow-offs that cause sound pollution. If valves are pressurized or need to deal with high flow rates, loud noise occurs. GLAUNACH inline silencers are the solution to that problem. They are based on the same principles, on the same technology as used in diffuser silencers. Gas expands through multistage diffuser rings in a ...

    By Glaunach GmbH based in Klagenfurt, AUSTRIA.

  • Acoustica - Model R02 - Rectangular Duct Mounted Splitter Silencers

    Available in seven standard lengths R02 Rectangular Duct Mounted Silencers have excellent attenuation properties, achieved with sound absorbing infill splitters, retained in the attenuator casing by a perforated liner.

    By Acoustica - Elta Fans Ltd. based in Colchester, UNITED KINGDOM.

  • D.P.Engineers - Model D.P.Engineers - Sound Attenuators & Duct Silencers

    Sound Attenuators & Duct SilencersWe design a comprehensive range of Sound Attenuators, which are used to reduce the noise generated by fans, and impellers used in air conditioning system. The noise is relevant to the amount of work they do to move the air, much of the noise generated by the fluctuations of radiated pressure and the pressure waves ...

    By D.P.Engineers based in DELHI, INDIA.

  • Vibro-Acoustics - Model RED - Dissipative Elbow Silencers

    When project space limitations cannot accommodate straight silencers, Rectangular Elbow Dissipative (“RED”) silencers can be used to both reduce noise and control pressure losses.

    By Vibro-Acoustics, a Swegon Group Company based in Markham, ONTARIO (CANADA). from HVAC Silencers Product line

  • Duct Silencer

    Available in all sizes and configurations to fit not only our equipment, but any application to decrease noise level.

    By N.R. Murphy Ltd. based in Cambridge, ONTARIO (CANADA).

  • Vibro-Acoustics - Model AC-D - Dissipative Axial Fan Cone Silencers

    Axial Fan Silencers by Vibro-Acoustics have a conical design which provides reduced horsepower requirements and energy savings when aerodynamically matched to the fan inlet or outlet.

    By Vibro-Acoustics, a Swegon Group Company based in Markham, ONTARIO (CANADA). from HVAC Silencers Product line

  • High Pressure Pneumatic Conveying

    High pressure pneumatic conveying. Suction or pressure conveying. Fans from 1.5kW to 37kW. Full range of ducting and valves. Cyclones and silencers. Free Planning and Product Advisory Service available.

    By BDC Systems Limited based in Wiltshire, UNITED KINGDOM. from Grain Conveying & Elevating Product line

  • Kinetics - Model KCRS - Rectangular Duct Silencers

    Solid rounded noses shaped for minimum pressure drop. Absorptive acoustic baffles in a duct-like casing, proportioned for optimum performance. 1 in. (25.4 mm) slip flange standard (longer flanges available on request)

    By Kinetics Noise Control, Inc. based in Dublin, OHIO (USA). from Duct Silencers, Plenums & Louvers Product line

  • Model RO2 2 - Rectangular Duct Silencers

    Available in seven standard lengths R02 2 Rectangular Duct Mounted Silencers have excellent attenuation properties, achieved with sound absorbing infill splitters, retained in the attenuator casing by a perforated liner. The resistance to airflow is a function of the face velocity and length. It is not recommended to select the R02 2 Silencers ...

    By Acoustica - Elta Fans Ltd. based in Colchester, UNITED KINGDOM. from R02 Rectangular Silencers Product line

  • Model R02 4 - Rectangular Duct Silencers

    Available in seven standard lengths R02 4 Rectangular Duct Mounted Silencers have excellent attenuation properties, achieved with sound absorbing infill splitters, retained in the attenuator casing by a perforated liner. The resistance to airflow is a function of the face velocity and length. It is not recommended to select the R02 4 Silencers ...

    By Acoustica - Elta Fans Ltd. based in Colchester, UNITED KINGDOM. from R02 Rectangular Silencers Product line

  • IAC - HVAC Silencers

    IAC Acoustics rectangular and cylindrical duct attenuators provide effective, predictable noise reduction at substantial savings over other noise reduction methods because IAC products are laboratory-developed and tested under controlled conditions. Moreover, we manufacture duct silencers to specific metal tolerances and with controlled acoustic ...

    By IAC Acoustics based in NORTH AURORA, ILLINOIS (USA). from HVAC Product line

  • Model LQB Series 3-6 - Lateral Access Filter Silencers

    Lateral Access Filter Silencers: Reduces size of sound enclosures and simplifies maintenance, Up to 1100 SCFM (1870 m3/hr). 99%+ removal efficiency standard Polyester: 5 microns, Paper: 2 microns. Temp (continuous): min -15° F ( -26° C) max 220° F (104° C). Filter change out differential: 15-20' H2O over initial delta P. Pressure ...

    By Solberg Manufacturing, Inc. based in Itasca, ILLINOIS (USA). from Intel Filter Silencers For Blowers & Compressors Product line

  • Ingreen - Model CLLG08/CLLG12 - Tube Silencers

    Tube silencer is developed on the basis of our patent product (Patent No. ZL 2001 2 0554664.4) and made of plastic punching plate arranged in array. Acoustic foam is filled in the space amid silencer pipes of which the head is covered by ABS panel and being held on tightly by Aluminum alloy strip. Internal steel framework is used as ...

    By Ingreen Technology Inc based in Ottawa, ONTARIO (CANADA).

  • Braden - Inlet Ducting / Silencers

    Designing a great air inlet is all about attention to acoustics and pressure drop. Our experienced staff of acoustical engineers employs the most modern software to provide compliant designs. Computational Fluid Dynamics (CFD), as well as, Finite Modeling, Thermal, Buckling and Vibration Frequency Analysis are applied to guarantee superior ...

    By Braden Manufacturing LLC based in Tulsa, OKLAHOMA (USA).

  • TrimPAC - Trim Handling System

    The TrimPAC is a versatile, pre-engineered trim handling system that comes with everything you need for reliable, clog-free, high-speed conveying and removal. It can cut and convey edge trim and matrix into a waste bin or baler at a 20% higher rate than venturi systems, while densifying the waste at rates up to 20:1. The TrimPAC is offered in two ...

    By Precision AirConvey Corp. (PAC) based in Newark, DELAWARE (USA). from Quick Solutions Product line

  • BBM - Flue Gas Silencers

    BBM Akustik Technologie, Germany is the world’s leading supplier  for  flue-gas  silencers.  We  supply  the  whole  range  of  silencers behind the gas turbine and for all kind of boilers. BBM Akustik  Technologie  has  executed  several  hundred  projects ...

    By BBM-CPG Technology, Inc. based in Laurens, SOUTH CAROLINA (USA).

  • Absorptive Silencer

    Absorptive silencers are very effective on high noise frequencies (500-8,000 Hz). At frequencies above or below this range, attenuation performance progressively diminishes. Since noise is absorbed by the packing material, absorptive silencers do not rely on internal baffles, tubes or other restrictive devices to achieve noise reduction. ...

    By B&W Universal based in Stoughton, WISCONSIN (USA). from Gas Turbine Inlet / Exhaust Systems Product line

  • Model S - Complete System For Single Solution

    Complete system to handle one production machine. The fact is exhausting the production waste ( independent on the material), chop them into very small pieces and transport them within ducting system with silencer to reduce the noise level into provided or existing waste disposal ( big bag, container or compactor) With a possibility of double big ...

    By Max Solution Systems based in Westhausen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you