Dust Control Sprayers Equipment For Air And Climate Near Virginia
-
Manufactured by MikroPul - a Nederman companybased in USA
This scrubber with integral wetted fan can be used in all industrial applications where dust, aerosol, and gas are present, especially in the metals and chemical industries. It can also be used for dust control in spray drying and incineration plants and odor control. Nederman MikroPul's Dynamic Scrubber can be used in all industrial applications where dust, aerosol, and gas are present, ...
-
Manufactured by EmiControlsbased in ITALY
The new and restyled V22 is the most powerful dust-suppression machine in EmiControls’ product range. Due to its long projection range and integrated 350° pivot function, it is most suitable for dust-control applications covering large areas. The patented nozzle head and the outer nozzle ring generate a finely atomized mist, which binds the dust particles and prevents them from ...
-
Manufactured by EmiControlsbased in ITALY
The V7 is the the V12 dust controller’s little sister. The patented nozzle head on the V7 is fitted in the axial direction in the turbine and achieves a much higher projection range than comparable nozzle configurations. It has a booster pump and can therefore also be used with the turbine switched off. The user-friendly remote control system, the 52° tilt angle, 360° pivoting angle ...
-
Manufactured by EmiControlsbased in ITALY
The V12Sm is the mobile solution to all your dust problems. It was designed on a platform so as to be loaded by any truck with a 6m (20 foot) loading bridge. It is the ideal solution for all the applications where the lack of water and power does not allow the use of standard equipment. The system can operate autonomously up to a maximum of 8 hours (with 20l/min.). Thanks to its small size the ...
-
Manufactured by EmiControlsbased in ITALY
The V12 is an all-purpose, powerful and environmentally-friendly dust-control solution. With its 52° tilt angle and 360° pivoting angle, the high-performance turbine is geared up for the widest possible operating range. Special nozzles with a ceramic insert generate a fine mist which is highly effective at binding the dust particles at source. State-of-the-art valve technology and an ...
-
Manufactured by EmiControlsbased in ITALY
Mobile or fixed dust controllers and odor-reducing machines. In addition to customized nozzle system installations, EmiControls also offers standardized dust controllers. Turbine models are made as well as dust-control lances. Both work in the same way. The nozzles generate a fine mist which binds the dust particles at source. All the models are made with high-quality and long-lasting ...
-
Manufactured by EmiControlsbased in ITALY
The L3 lance is the first dust-control lance on the market. It is a compact and user-friendly solution for close-range applications. It works without a turbine, allowing it to get near to the source of dust. The spray action can be narrow and flat, fan-shaped or cylindrical, depending on the requirements in any given case. With its flexible spray head, the fine mist jet with its optimized droplet ...
-
Manufactured by Probe Industries Limitedbased in UNITED KINGDOM
Developed by Probe's dedicated Research and Development team. Destroys odours immediately by changing their molecular structure. Works across entire spectrum of organic odour molecules. So effective, it can be supplied fragrance free!. Antibacterial to prevent growth of legionella and other pathogens in misting systems. Technology now licensed and approved for use in the NHS as well as commercial ...
-
Manufactured by Rel-Tek Corporationbased in USA
MagneBoss (MB-EPC-2) – A unique, intelligent conveyor belt monitoring and control system with powerful features from its embedded PC, using a robust, highly secure Linux operating system. A new dimension of worker communications was added, providing voice messages warning of belt conditions and ...
-
Manufactured by Lechler GmbHbased in GERMANY
Uniform full cone distribution with thorough atomization. X-Style vane for high free passage. Stable spray angles at low ...
-
Manufactured by Lechler GmbHbased in GERMANY
Two types of hollow cone nozzles – the axial-flow hollow cone nozzles and the tangential-flow hollow cone nozzles – are available for selection: A decision is made between axial hollow-cone nozzles and tangential-flow hollow-cone nozzles. With the axial hollow-cone nozzles, the liquid is supplied axially. With the tangential-flow hollow-cone nozzles, a tangential liquid inlet into the ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The 510 series of general-purpose gas analyzers provide continuous monitoring of concentrations of the specific sample gas. The analyzers can be operated from controls on the front panel or by commands from a remote computer. Measurement results are displayed on the front panel and are available to remote data logging systems through an industry-standard ...
-
Manufactured by Sandvik Mining and Construction B.Vbased in NETHERLANDS
Hydraulic hammers have many special features designed to make working and operating easier and faster. The special features can be combined in several ways to create a solution that suits customer ...
-
Manufactured by Air Spectrum Environmental Limitedbased in UNITED KINGDOM
The DC50 is used for a variety of applications including dust suppression and disinfection. DC50 includes in in-built generator. DC50 provides our most powerful, heavy mist of potable water for a variety of fogging uses. Throw reach is around 50m depending on local conditions. The DC50 cannon head can rotate up to 350°, allowing for maximum coverage and ...
-
Manufactured by Air Spectrum Environmental Limitedbased in UNITED KINGDOM
The DC32 is used for a variety of applications including dust suppression and disinfection. DC32 includes in in-built generator. DC32 provides a powerful, heavy mist of potable water for a variety of fogging uses. Throw reach is around 30m depending on local conditions. The DC32 cannon head can rotate up to 350°, allowing for maximum coverage and ...
-
Manufactured by Air Spectrum Environmental Limitedbased in UNITED KINGDOM
The DC30 is used for a variety of applications including dust suppression and disinfection. DC30 provides a powerful, heavy mist of potable water for a variety of fogging uses. Throw reach is around 30m depending on local conditions. The DC30 cannon head can rotate up to 350°, allowing for maximum coverage and ...
-
Manufactured by Buffalo Turbinebased in USA
The Monsoon Dust Controller Diesel is another industry first brought to you by Buffalo Turbine. The 3-Cylinder Liquid-Cooled Kohler Diesel Engine allows for portable dust / odor control with the luxury of a fuel type that is common in these industries. This machine is equipped with 270 degree oscillation as well as several fail-safe features that protect the life of the machine. Also the Dust ...
-
Manufactured by Buffalo Turbinebased in USA
The Buffalo Turbine Hydraulic Dust Controller misting system is a permanent solution for any dust and odor control, designed for the Demolition, C&D Recycling and Metal Recycling industries. The Hydraulic Dust Controller can be powered by any hydraulic source that has at least 16 gpm flow rates. Simply connect the Gyratory Atomizing Nozzle to a common 3/4″ water line and harness the ...
-
Manufactured by Buffalo Turbinebased in USA
The Buffalo Turbine Monsoon Dust Controller Electric misting system is permanent solution for any dust and odor control, designed for the Demolition, C&D Recycling and Metal Recycling industries. The Electric Dust Controller is available in several voltages as well as frequencies. The unit comes standard with a three wheel tow/push job-site trailer and oscillation stand. Simply connect the ...
-
Distributed by H.O. Penn Machinery Company Inc.based in USA
The new PM102 with a track undercarriage combines enhanced production capabilities, optimized performance and simplified service to complete tough milling applications with productive results. The Cat® C7 Engine with ACERT Technology provides ample power while meeting U.S. EPA Tier 3 and European EU Stage IIIa compliancy. Designed for high production and long life, the PM102 rotor has quick ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you