We couldn't find any cyclone dust collector equipment suppliers or service providers located in Macedonia

Here is a list of equipment results with suppliers serving Macedonia

Cyclone Dust Collector (Dust Control) equipment available in Macedonia

  • Model GP & HE Series - Cyclone Dust Collector

    GP series: designed for economical first cost and is currently used for general purposes. HE series: tuned to obtain a higher efficiency in more critical applications.

    By Airex Industries Inc based in Laval, QUEBEC (CANADA). from Cyclone Dust Collector Product line

  • Cyclone Dust Collector

    Cyclone dust collector (cyclone) is used for separation of solid fractions from air. Cyclone can be used separately or as a pre-separation before the filter units. Cyclone is not suitable for suction of sticky (wet) dust. Efficiency of cyclone separator depends on size and weight of exhausted particles and it might be regulated by valve in ...

    By Hennlich Engineering s.r.o. based in Litomerice, CZECH REPUBLIC. from Dust Collectors Product line

  • Tama - Model Ares - Cyclone Dust Collectors

    Preventive treatment to partially dampen polluting elements in the air - high performance. The Ares cyclone is used as a preventive treatment to partially dampen pollution in the air, when you want to limit the powder loads arriving to the filter. It is suitable to separate powder generated by processing in the metal working.

    By TAMA S.p.A. based in Predaia, fraz. Mollaro, ITALY. from Cyclone Dust Collectors Product line

  • Tama - Model Aren - Cyclone Dust Collectors

    The Aren cyclone is used as a preventive treatment to partially dampen pollution in the air, when you want to limit the powder loads arriving to the filter. It is suitable to separate powder generated by processing in the metal working, wood and environmental, recycling and waste sectors.

    By TAMA S.p.A. based in Predaia, fraz. Mollaro, ITALY. from Cyclone Dust Collectors Product line

  • Model C Series - Cyclone Dust Collectors

    The C Series is a high-efficiency cyclone separator designed to effectively remove large to moderate size particles (chips, metal grindings, sawdust) from the air stream. Used alone or in conjunction with another dust collector, the Cyclone separates coarse contaminants from fine, non-visible particles and exhausts clean air. Typical applications ...

    By United Air Specialists, Inc based in Cincinnati, OHIO (USA). from Industrial Dust Collectors - Cyclone Collectors Product line

  • Macrotek - Cyclones - Cyclonic Dust Collectors

    Macrotek's high efficiency cyclonic dust collectors are engineered to include specialty design features that provide high efficiency at low pressure drop. Centrifugal force separates suspended particles from the gas for high efficiency gas cleaning. The gas is introduced through the special involute inlet, producing a spiralling motion which ...

    By Macrotek Inc. based in Markham, ONTARIO (CANADA). from Additional Products Product line

  • Cyclone Dust Collectors

    Our cyclone dust collector design is in the high efficiency dust collection category, sometimes called a Chemical Industry type. Note the helical roof, the long taper on the cone and the separate dust trap. Efficiency can be predicted if particle specific gravity, operating temperature and pressure, gas constituents (if not simply air), and ...

    By Beckert & Hiester Inc. based in Saginaw, MICHIGAN (USA).

  • Aerodyne SplitStream™ - Counter Cyclonic Dust Collector

    The Aerodyne SplitStream™ is a counter cyclonic dust collector that is ideal for your toughest dust collection problems Is capable of handling a wide range of materials, Has no major moving components, Requires minimal maintenance, Fits horizontal spaces. Particulate that is abrasive, fibrous, sticky, or hygroscopic can be easily separated ...

    By Aerodyne - A Division of Abanaki Corporation based in Chagrin Falls, OHIO (USA). from Horizontal Dust Collectors Product line

  • AER - Model CYC Series - Cyclone Dust Collectors

    The CYC Cyclone Separators are among the most efficient and cost-effective dust collectors available. CYC Cyclones are offered in capacities from 800 CFM to 13,000 CFM and efficiently remove moderate- to large-sized particles from the airstream. Fans are self-cleaning, material-handling, radial blades designed to deliver peak airflow while the low ...

    By AER Control Systems based in New Haven, CONNECTICUT (USA). from Filtration Units Product line

  • Donaldson Torit - Cyclone Dust Collectors

    Donaldson Torit Cyclone dust collectors are typically used to collect coarse or large dusts produced in high dust loading applications. They are mechanical separators that use the principle of centrifugal force to remove particulate from the airstream and are also used for product recovery applications.

    By Donaldson Torit based in Minneapolis, MINNESOTA (USA).

  • Aerodyne - Model GPC - Ground-Plate (GPC) Cyclone Dust Collector

    The Aerodyne GPC Cyclone Dust Collector represents an improvement over conventional high-efficiency cyclones. Unlike conventional cyclones, the GPC Dust Collector does not require a long, tapered body for effective dust separation. The unique design provides a high-efficiency, compact unit that is available in horizontal or vertical ...

    By Aerodyne - A Division of Abanaki Corporation based in Chagrin Falls, OHIO (USA). from Horizontal Dust Collectors Product line

  • ITK Envifront - Cyclone Dynamic Dust Collector

    The cyclone is a simply constructed dynamic dust collector, which with help from the centrifugal power collects coarse and medium coarse, granular or short fibre dust, from air or another gas. To make the cyclone work satisfactory, the dust must be fairly dry and not be attachable or sticky.

    By ITK Envifront AB based in Växjö, SWEDEN. from Dynamic Separators Product line

  • Model CVA-1030 - Dust Collector

    Dust, more dense than the air, penetrates inside the cyclone over the top. It is caught in a circular movement towards the partition and fall inside the container by gravity. The clean air and micro-particulates go to the cyclone central zone in an inverted circular movement and are evacuated towards the dust collector. A second cyclone separates ...

    By Chiko Airtec based in Charenton le Pont, FRANCE. from Dust Collector & Cyclone Product line

  • ED-VAN - Cyclones

    Cyclones are used for collecting particles with coarse grains in the air in the dedusting systems. Cyclones are not suitable for working with dusts with thin grains because of their structures and their working principles. Cyclones also works as first stage dust collector before the filter in the systems where dust load is high. They reduce dust ...

    By ED-VAN Vantilator Sanayi Ve Ticaret Ltd Sti based in Yenişehir, TURKEY. from Cyclones Product line

  • CGS - Single High Efficiency Cyclone Collectors

    CGS Cyclone Collectors are designed to achieve high dust collection efficiencies at low pressure drops. We can satisfy the most stringent air pollution control laws and/or product recovery requirements. Our Cyclones incorporate a volute or tangential inlet. Collection efficiency depends on many factors such as operating pressure drop, cyclone ...

    By Clean Gas Systems Inc (CGS) based in Hauppauge, NEW YORK (USA). from Cyclone Collectors Product line

  • CGS - Quad High Efficiency Cyclone Collectors

    CGS Cyclone Collectors are designed to achieve high dust collection efficiencies at low pressure drops. We can satisfy the most stringent air pollution control laws and/or product recovery requirements. Our Cyclones incorporate a volute or tangential inlet. Collection efficiency depends on many factors such as operating pressure drop, cyclone ...

    By Clean Gas Systems Inc (CGS) based in Hauppauge, NEW YORK (USA). from Cyclone Collectors Product line

  • Model CE/S and CE/S/B - Cyclones

    CE/S and CE/S/B (with basalt lining) dust collectors offered by ECO INSTAL are characterized by high operating efficiency, resistance to erosive wear from dust and reduced flow resistance in comparison with hitherto applied technologies.The equipment is used in particular in technologies involving erosive dusts e.g. in power engineering, in loose ...

    By ECO INSTAL based in 61-249, POLAND. from Mechanical Dust Separators Product line

  • Model AP 3 - Dust Collectors

    The air to be treated (and thus the dust it contains) enters through the main pipe. Afirst blastingis done by means of a cyclone of air, made very effective by its special internal design formation, whereas asecond blastingoccurs when a fine spray of water is produced from within the channeling system and is forced downstream with the cyclone. The ...

    By Pellizzari & Sons Ltd based in Arzignano, ITALY. from Dust Collectors Product line

  • Model AP 2 - Dust Collectors

    The air to be treated (and thus the dust it contains) enters through the main pipe. A first blastingis done by means of a cyclone of air, made very effective by its special internal design formation, whereas a second blastingoccurs when a fine spray of water is produced from within the channeling system and is forced downstream with the cyclone. ...

    By Pellizzari & Sons Ltd based in Arzignano, ITALY. from Dust Collectors Product line

  • Model AP1 - Dust Collectors

    The air to be treated (and thus the dust it contains) enters through the main pipe. Afirst blastingis done by means of a cyclone of air, made very effective by its special internal design formation, whereas asecond blastingoccurs when a fine spray of water is produced from within the channeling system and is forced downstream with the cyclone. The ...

    By Pellizzari & Sons Ltd based in Arzignano, ITALY. from Dust Collectors Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you