dust sampling Equipment available in Haiti

Available in Haiti| Near Haiti
26 Results found

We couldn't find any dust sampling equipment in Haiti

Here is a list of results available in Haiti

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Dust Control ×

  • Keyword: dust sampling ×

  • Available in: Latin America ×

  • Available in: Haiti ×

Model C1010 - Dust Sampling Template, 10cm x 10cm, 250pk

by Environmental Express     based in Charleston, SOUTH CAROLINA (USA)

For use with GhostWipes for Pb and Be sampling. Isolate the area you're testing. Size: 10cm x 10cm. Templates are sold in packs of 250. Also available in 30cm x 30cm size, in packs of 100 as C1012.

TAPI - Model 651 - Ultrafine Particle Monitor

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

Ultrafine particle (those less than 100nm, or 0.1µm in size) are produced through combustion activities and are persistent in all ambient air. Concentrations of these tiny particle can be very high near emissions sources (for example, near busy roads), and both acute and chronic exposure are believed to lead to health problems. As part of ...

Model TD1200 - Dust Collector

by Mineral Stats Inc     based in Lakewood, COLORADO (USA)

Specification – TD1200. Model: TD1200..Capacity: 1200cfm. Total Emission to Atmosphere: <10mg/mâ³>. Filters: Pleated Spun Bonded Polyester Needlefelt. Expected Filter Life: In excess of 4 Years (under normal operating conditions).Filter Cleaning: Reverse Jet Pulse (Venturi Assisted). Control System: Differential Pressure ...

StackGuard - Dust Emission Measuring System

by Sigrist-Photometer AG     based in Ennetbürgen, SWITZERLAND

The StackGuard continuously monitors the scatted light intensity of an extracted, withdrawn sample of gas. The laser light source minimized stray light and improves sensitivity to the µg/m³ level, the filtered purge air prevents from window soiling. A calibration check is performed by means of a checking rod. The sample air is led out ...

Zefon - 10mm Dorr-Oliver Cyclone - Heavy Duty

by Zefon International, Inc.     based in Ocala, FLORIDA (USA)

Zefon’s 10mm Nylon Cyclone is designed to separate respirable dust particles from non-respirable particles and allow the respirable particles to be collected on a filter cassette. Model 456243 is designed to fit Zefon mining cassettes and is specified for use in coal mine dust sampling per 30 CFR, part 74.

Zefon - Inhalable Dust Sampler

by Zefon International, Inc.     based in Ocala, FLORIDA (USA)

The Zefon Inhalable Dust sampler is a reusable filter cassette with a sampling head designed to measure the worker's exposure to inhalable particulates and respirable dust. When sampling at the recommended flow rate of 2 LPM, it collects a particle size distribution that includes particles of 100 micron and smaller. This meets the definition set ...

Gravimat - Model SHC500 - Gravimetric Dust Concentration Measuring Device

by KELMA NV     based in Niel, BELGIUM

SHC500 Gravimat - Mobile dust measuring system For control and gravimetric comparison measurements on dust concentration monitors. A partial gas flow is sucked off isokinetically via a filter head probe (control in real time). The dust content ist determined by weighting the dust collector mass before and after extraction.

Zefon - 10mm Conductive Nylon Cyclone (Dorr-Oliver style)

by Zefon International, Inc.     based in Ocala, FLORIDA (USA)

The Zefon 10mm Conductive Nylon Cyclone (Dorr-Oliver style) is used in conjunction with 37mm filter cassettes to separate dust particles by size with the respirable particles being collected on the filter and larger particles being removed. The collection efficiency curve meets the standards set forth by ACGIH/ISO/CEN for a respirable curve with a ...

Aerosol Neutralizer - Model EAN 581 - Bipolar Electrostatic Discharger

by Topas GmbH     based in Dresden, GERMANY

The mechanical interaction of particles, especially solid ones, may cause undesirable levels of electrostatic charge. Test dusts must be generated with a high degree of reproducibility for instance when evaluating aerosol separation techniques such as cyclones, filters or impactors. Comparable results can only be obtained at controlled and similar ...

Ventia - Model IAQ-PAK (IQ-DM-1) - Dust Mite

by Indoor Biotechnologies, Inc.     based in Charlottesville, VIRGINIA (USA)

For on-site assessment of dust mite allergens by indoor air quality professionals and certified industrial hygienists. For rapid assessment of dust mite allergens in homes, order your IAQ-PAK today! The Ventia Consultant's Pack contains everything needed to perform 25 tests. All you need is a vacuum cleaner to which you can attach the DUSTREAM ...

Model 1000pk - Lead Dust Wipes

by Environmental Monitoring Systems, Inc.(ems)     based in North Charleston, SOUTH CAROLINA (USA)

Individually wrapped wipes for lead dust sampling. Wipes meet all ASTM E1792 specifications for sampling materials for lead in surface dust and OSHA Methods ID-125G (Addendum B) and OSS1. Contains water, polyorbate 20, methylparaben, and propylparaben.

Aloa - Model ADA - Dust Deposition Measurement

by ALOATEC     based in Calais, FRANCE

Best practices for dust control: Monitoring networks or environmental studies. Alarms: Real time view of dust deposition - Alarms in case of threshold crossing. Reduction of claims from neighbourhood: Dust deposition monitoring - Anticipation of possible inconvenience for people. Regulatory dust deposition measurements: Control of regulatory ...

JPES - Portable Sampling Probe

by KELMA NV     based in Niel, BELGIUM

The heated JPES sample probe is designed for use in extractive sampling systems with sample gases containing dust and aerosol, especially for measurement in not stationary applications.Different pipes - heated and unheated-, materials and filters as well as heated hoses make the JPES very flexible for different applications.

PTFE (Teflon) Needle Felt for Dust Collector Systems

by Zhejiang Suita Filter Material Technology Co., Ltd     based in Tiantai, CHINA

Standard sample: Material: 100%PTFE fiber / PTFE filament scrim, Weight: 750g/sq.m, Thickness:1.5mm, Air Permeability: 280 L/ m2. S @200pa, Tensile strength: Warp: >800N/5cm; Weft :> 900N /5cm, Elongation : Warp: < 25%; Weft:

Aramid Needle Felt for Dust Collector Systems

by Zhejiang Suita Filter Material Technology Co., Ltd     based in Tiantai, CHINA

Standard sample: Material: 100% aramid filter / aramid scrim, Weight: 500g/sq.m, Thickness:2.0mm, Air Permeability: 280 L/ m2. S @200pa, Tensile strength: Warp: >800N/5cm; Weft :> 1300N /5cm, Elongation : Warp: < 25%; Weft:

Polyester Needle Felt Filter Bag for Dust Collector Systems

by Zhejiang Suita Filter Material Technology Co., Ltd     based in Tiantai, CHINA

Standard sample: Material: 100% polyester virgin fiber/ Polyester high tensile strength scrim, Weight: 500g/sq.m, Thickness:1.6mm, Air Permeability: 280 L/ m2. S @200pa, Tensile strength: Warp: >1000N/5cm; Weft :> 1200N /5cm, Elongation : Warp: < 25%; Weft:

Water & Oil Repellent Needle Felt Filter Cloth for Dust Collector Bags

by Zhejiang Suita Filter Material Technology Co., Ltd     based in Tiantai, CHINA

Standard sample(polyester): Material: 100% polyester virgin fiber/ Polyester high tensile strength scrim, Weight: 500g/sq.m, Thickness:1.6mm, Air Permeability: 280 L/ m2. S @200pa, Tensile strength: Warp: >1000N/5cm; Weft :> 1200N /5cm, Elongation : Warp: < 25%; Weft:

Ahlstrom - Extraction Thimbles

by Ahlstrom Filtration     based in Tampere, FINLAND

Cellulose thimbles are high quality sample reservoirs for quality control, research, and analytical applications where solvent extraction of solids and semi-solids must be carried out. The use of a Soxhlet extractor provides a safe method of extraction with toxic and other noxious solvents.

Sensidyne Cyclone Assembly Kit

by Environmental Monitoring Systems, Inc.(ems)     based in North Charleston, SOUTH CAROLINA (USA)

The Sensidyne Cyclone Assembly Kit is designed to separate the respirable fraction of airborne dust from the nonrespirable fraction in order to provide the most representative sample.

Teledyne - Model 6712C - Compact Portable Sampler

by Teledyne Isco     based in Lincoln, NEBRASKA (USA)

The 6712C compact model gives you the world's most versatile sampler controller in a smaller-diameter package that fits in 18' and offset manholes. Large, comfortable handles make transporting safe and convenient - even when wearing gloves. The NEMA 4X, 6 (IP67) enclosure is submersible, watertight, and dust-tight. Plug-in 700 Series Modules and ...

Need help finding the right suppliers?

Let the XPRTs do the work for you