Dust Emissions Monitoring Equipment For Air And Climate Available In Yemen
-
PremiumManufactured by ENVEAbased in FRANCE
The Leak Locate 660 PLUS is a dust emission monitoring system incorporating a digital network and advanced graphics capability. It is designed for use in any processes where filter type arrestment plant are used, eg bag, ceramic and cartridge filters. The system comprises up to 32 networked sensors, a central control unit, user interface with data acquisition and optional PC ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME LEAK LOCATE 320 PLUS is a digitally networked, multi-compartment baghouse monitoring system providing remote observation of the condition of bag and cartridge filters. An ElectroDynamic™ sensor is installed in the outlet of each compartment to monitor dust emission levels. The network of sensors is connected to the PLUS Controller, which provides a large graphical user interface ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Dust and opacity monitor, designed for measuring dust emission concentrations in combustion applications where automatic calibration checks are not required. The 4200+ is the most accurate and reliable monitor available for dust and opacity measurements in combustion applications not requiring automatic calibration checks and regulatory compliance. Optimised for multi-process plants using common ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement applications. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter Pro allows the system to be fully integrated with all Dekati® Instruments and is also ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of dust, smoke and particulates in a wide range of industrial applications. NOTE: The 4200 is currently ...
-
PremiumManufactured by ENVEAbased in FRANCE
LEAK ALERT 75/80 was specially developed to carry out electrodynamic filter damage and leakage monitoring in industrial filter ...
-
Manufactured by Seframbased in FRANCE
The SPT50 is a dust emission controller based on the principle of triboelectricity. It consists of two parts: A sensor directly installed on the duct to be monitored. The sensor probe is immersed in the particle-laden air stream. It assesses the dust emission rate in real time. A user connection box directly connected to the sensor. It allows the monitoring and detection of dust ...
-
Manufactured by Babbitt International, Inc.based in USA
The PM 1 and PM 1 PRO are single-point/basic functionality dust particulate monitors, employing charge induction sensing for reliable continuous monitoring of dust particulate in stacks, ducts and pipes. Applications include filter leak detection, cyclone overflow and powder flow/no ...
-
Manufactured by Photonics Technology Obninsk, Ltdbased in RUSSIA
Two-wavelength lidar LSA-2c for laser sensing of the atmospheric aerosols and ...
-
Manufactured by Babbitt International, Inc.based in USA
The FS10000 is designed to detect the flow of dust, granular or powered materials in a pneumatic conveying line or chute. This flow switch is espacecially suited to detect the flow of dust resulting from a ruptured filter bag in a bag house or dust ...
-
Manufactured by Babbitt International, Inc.based in USA
The DP20T is a heavy duty, maintenance free low pressure transmitter designed for fabric filters, cyclones, powder processes and low pressure particulate laden pipes.The unique flush/ported design enables configuration for either differential or static movement. The ability to transmit accurate measurements below 10 W.C., over a broad temperature range without clogging, makes the DP20T the ideal ...
-
Manufactured by Babbitt International, Inc.based in USA
Emissions from dust collectors and bag houses has become a major environmental issue. Babbitt has two products which monitor these processes, and assist in reducing the level of dust emissions. The FS10000 Flow Switch is able to alarm and/or shut down a dust collector when a weak filter is detected BEFORE it becomes a major failure and source of dust emissions. With the FT 4100 Flow Transmitter, ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The EnergyTech 301 is a low cost dust monitor using well-proven tribo-electric technology providing accurate and rapid results. The EnergyTech 301 requires no critical alignment and has no optical surfaces to keep clean. The sensor is easy to install, requiring only a simple probe and is ideal for small duct sizes. Minimal maintenance is required, infrequent probe cleaning and low installation ...
-
Manufactured by Bauermeister Zerkleinerungs-technik GmbHbased in GERMANY
For crushing brittle to medium-hard products where a narrow particle size distribution is required with a minimum amount of dust. The patented continuous roll gap monitoring increases the quality of the crushing results well beyond the usual possible ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
For monitoring dust emissions and detecting effectively damages at filtering precipitators . The device is simple in construction and very user-friendly. The integrated micro-controller allows numerous possibilities to use the PFM 02 Ex as well as a timely monitoring of the dust emissions. Target value calibration: Enter a known, averaged dust content in operation state - The PFM 02 Ex ...
-
Manufactured by Durag Groupbased in GERMANY
Ambient air particulate monitor to detect TSP, PM10 or PM2.5 in ambient air for use in industrial or governmental ambient air monitoring ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The StackGuard continuously monitors the scatted light intensity of an extracted, withdrawn sample of gas. The laser light source minimized stray light and improves sensitivity to the µg/m³ level, the filtered purge air prevents from window soiling. A calibration check is performed by means of a checking rod. The sample air is led out of the stack, heated up above the dew point and ...
-
Manufactured by Dynoptic Systems Ltd - ACOEM Groupbased in UNITED KINGDOM
The DSL-240 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in the exhaust gas passing through a duct, stack or flue. The DSL-240 uses the innovative Dynamic Detection Principle (DDP) in which a light beam emitted from the Transmitter passes across the stack to the Receiver, which measures fluctuations in the intensity of the received ...
-
Manufactured by Monitor Technologies, LLCbased in USA
The DustTrend ES provides continuous trend measurements that allow plant operators to identify changes in dust emission levels and optimize the facility's filtration systems. ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The EnergyTech 101 Opacity Monitors consist of a visible light transmitter and receiver arrangement with digital data processing in a local display unit. The monitors can display data in either opacity, extinction or dust density in mg/m3 or normalised dust density in mg/Nm3. The EnergyTech 101 possesses four analogue inputs for normalisation data; temperature, oxygen, pressure and water ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you