Dust Emissions Equipment For Air And Climate In Malaysia
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Disturbances in the sequence of operation can have disastrous effects, when single parts of the equipment are fouled or damaged. Reliable and safe operation conditions are crucial for the production plant, where unplanned downtime and loss of production must be avoided. Kurita offers a broad range of chemical programmes that are tailored to suit your unique needs and operating requirements. We ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Dust and opacity monitor, designed for measuring dust emission concentrations in combustion applications where automatic calibration checks are not required. The 4200+ is the most accurate and reliable monitor available for dust and opacity measurements in combustion applications not requiring automatic calibration checks and regulatory compliance. Optimised for multi-process plants using common ...
-
PremiumManufactured by ENVEAbased in FRANCE
The QAL 260 series is suitable for measuring dust concentrations in Combustion, Incineration and other industrial stacks and is compliant with EN 14181. Having a 0-15 mg/m³ certification range, the QAL 260 sensor can be used at low or high dust levels. Due to dynamic ranging, the sensor is also suitable for much higher dust levels found in Power, Cement and Metals smelting ...
-
Manufactured by Stolzbased in FRANCE
Our sequencer is designed to control and monitor the pads and sleeves filters cleaning. The solenoid valves are inserted into the sequencer. This device is set according to the required use. The sequencers are fitted with a ΔP module, controlling the start-up and stop of the cleaning operation. This device saves air and improves ...
-
Manufactured by Amandus Kahl GmbH & Co. KGbased in GERMANY
Bulk products are processed in many industries - mainly in the chemical and pharmaceutical industries. Particularly during transport or storage, the mealy and dusty product can cause problems. Our plants for pelleting precisely these bulk products offer a ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A high-specification opacity and dust monitor meeting global compliance standards for monitoring combustion processes. 4500 MkIII is the most accurate and reliable continuous opacity monitor available, combining AMETEK Land’s ground-breaking innovation and simple design for precise, problem-free operation. Unmatched, class-leading accuracy ensures compliance limits for dust emissions and ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME LEAK LOCATE 320 PLUS is a digitally networked, multi-compartment baghouse monitoring system providing remote observation of the condition of bag and cartridge filters. An ElectroDynamic™ sensor is installed in the outlet of each compartment to monitor dust emission levels. The network of sensors is connected to the PLUS Controller, which provides a large graphical user interface ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Leak Locate 660 PLUS is a dust emission monitoring system incorporating a digital network and advanced graphics capability. It is designed for use in any processes where filter type arrestment plant are used, eg bag, ceramic and cartridge filters. The system comprises up to 32 networked sensors, a central control unit, user interface with data acquisition and optional PC ...
-
PremiumManufactured by ENVEAbased in FRANCE
LEAK ALERT 75/80 was specially developed to carry out electrodynamic filter damage and leakage monitoring in industrial filter ...
-
PremiumManufactured by ENVEAbased in FRANCE
The DM 170 is designed to comply with the TÜV suitability testing scheme to EN 15267 and for measuring dust concentrations in a wide range of industrial ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of dust, smoke and particulates in a wide range of industrial applications. NOTE: The 4200 is currently ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon’s 10mm Nylon Cyclone is designed to separate respirable dust particles from non-respirable particles and allow the respirable particles to be collected on a filter cassette. Model 456243 is designed to fit Zefon mining cassettes and is specified for use in coal mine dust sampling per 30 CFR, part ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or stack. Its dual-pass optical arrangement is based on twin transmissometers measuring in opposing directions through the same section of the gas stream, providing not only an accurate average of the dust loading, but ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The EnergyTech 301 is a low cost dust monitor using well-proven tribo-electric technology providing accurate and rapid results. The EnergyTech 301 requires no critical alignment and has no optical surfaces to keep clean. The sensor is easy to install, requiring only a simple probe and is ideal for small duct sizes. Minimal maintenance is required, infrequent probe cleaning and low installation ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Zefon Respirable Dust Aluminum Cyclone is used in conjunction with 37mm 3 piece open face filter cassettes to separate dust particles by size with the respirable particles being collected on the filter and larger particles being removed. The collection efficiency curve meets the standards set forth by ACGIH/ISO/CEN for a respirable curve with a median 50% cut point of 4µ at 2.5 LPM ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Zefon 10mm Conductive Nylon Cyclone (Dorr-Oliver style) is used in conjunction with 37mm filter cassettes to separate dust particles by size with the respirable particles being collected on the filter and larger particles being removed. The collection efficiency curve meets the standards set forth by ACGIH/ISO/CEN for a respirable curve with a median 50% cut point of 4µ when operated at a ...
-
Manufactured by Casella - TSI Incorporatedbased in UNITED KINGDOM
Comprising of an Apex2 air sampling pump and Microdust Pro real-time dust monitor, the Dust Detective is perfect for short-term static monitoring on any site. You can always use the equipment independently to one another too to make the most of your ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Zefon Inhalable Dust sampler is a reusable filter cassette with a sampling head designed to measure the worker's exposure to inhalable particulates and respirable dust. When sampling at the recommended flow rate of 2 LPM, it collects a particle size distribution that includes particles of 100 micron and smaller. This meets the definition set forth by ACGIH for inhalable particulate. The ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The StackGuard continuously monitors the scatted light intensity of an extracted, withdrawn sample of gas. The laser light source minimized stray light and improves sensitivity to the µg/m³ level, the filtered purge air prevents from window soiling. A calibration check is performed by means of a checking rod. The sample air is led out of the stack, heated up above the dew point and ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The EnergyTech 101 Opacity Monitors consist of a visible light transmitter and receiver arrangement with digital data processing in a local display unit. The monitors can display data in either opacity, extinction or dust density in mg/m3 or normalised dust density in mg/Nm3. The EnergyTech 101 possesses four analogue inputs for normalisation data; temperature, oxygen, pressure and water ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you