dust filter part Articles

  • Dust monitoring

    Generally, two different approaches are used to measure the amount of dust deposited on a surface; Determination of the soiling of a surface, by a change in its properties; Determination of the quantity of dust deposited, by weight. WHAT IS DUST? Dust is a generic term used to describe fine particles that are suspended in the atmosphere. Dust comes from a wide variety of sources, including soil, ...


    By Queensland Laboratory

  • Dust collection dilemma: ostrich egg dust

    Rick Peil from the Toolking Superstore was presented with an interesting dust collection dilemma. Tamera Seevers creates unique fine art out of ostrich eggs (www.tameraseeversstudio.com). Carving and finishing the ostrich eggs takes up to three months and creates a very fine, ostrich egg dust. Her problem was with her 1-micron bag on the dust collection system, the dust was still escaping into ...


    By American Fabric Filter Co

  • Dust Collection Booths Defined

    Dust collection booths are important tools that have an important function in the conservation of your workplace. This article gives you a brief description of what dust collection booths are and how they can help you maintain the sanitation of your workplace. How They Work Dust collection booths work exactly ...


    By ProVent, LLC

  • Down with road dust

    There are more than 3.9 million miles of roadway in the United States, according to the Federal Highway Administration, and, depending on the area of the country you're in, as much as 70% of that road mileage is unpaved. The 1997 U.S. Environmental Protection Agency (EPA) National Air Quality and Emissions Trends Report states that those unpaved roads--which can cover a wide range of ...


    By Cypher Environmental Ltd.

  • Uni-wash wet dust collectors reduce industrial dust hazards

    Metal dust — it can be a fabricator’s worst nightmare. In particular, the combination of dry aluminum dust and steel dust is literally a disaster waiting to happen. The National Fire Protection Association has a list of metal dusts and the specific PPM that the air can hold of each before the serious risk of an explosion arises. As a worksite approaches the PPM safety limits of one or ...


    By ProVent, LLC

  • Effective Industrial Dust Collector Strategies

    Finding the correct type of industrial dust collector for the grinding section is a must for opposing an injection mold creating shop. This is vital for health and welfare of workers and for the performance of grinding machines. Dusts produced from electrodes are graphite and copperand during the milling or grinding operation, these needs to be filtered away from the atmosphere with an ...


    By ProVent, LLC

  • How do oil mist collectors work? Comparing the different technologies, part I

    There are multiple different physical mechanics used by the industrial tools referred to as “oil mist collectors. Over the next two entries, we’re going to take a look at the four most common technologies and why a business might want to use or avoid each one. Centrifugal Mist Collectors The first ...


    By ProVent, LLC

  • How do oil mist collectors work? Comparing the different technologies, part II

    In our previous article about oil mist collector technology, we discussed the pros and cons of centrifugal mist collectors and filter-based mist collectors. Today, we look at the other two most common methods of getting oil mist out of the air. Electrostatic Precipitator Mist Collectors An electrostatic precipitator uses ...


    By ProVent, LLC

  • ‘New for old’ dust analyser deal brings 96.66% data capture rates to NE Lincs

    With the UK’s largest port and the industrial town of Grimsby in its jurisdiction, air quality monitoring is a primary concern for North East Lincolnshire Borough Council. When DEFRA reported that the TEOM dust analysers the council relied on weren’t up to standard, rapid action was required and Enviro Technology (ET) stepped in with its BAM 1020s. North East Lincolnshire is the ...

  • Air Powered Combustible Dust Vacuums More Economical and More Powerful than Electric Counterparts

    Compressed air vacs have significantly lower upfront cost and lower yearly maintenance costs that quickly surpass the expense of compressed air production. There is a prevailing perception in the industrial world, attributable to the higher costs associated with producing compressed air, that air powered explosion proof vacuums cost more to operate. According to David Kennedy, General Manager of ...


    By AirSys Technologies, Inc.

  • Baghouse dust collector helps improve casting process one step at a time case study

    Cascade Dafo, Fernadale, Wash., designs and manufac- tures dynamic ankle and foot orthoses (orthotic braces) to help im- prove the mobility of children and adults with neuromuscular chal- lenges. In the past, the company used a cartridge dust collector to collect dust generated during the finishing step of a manual plaster-casting process. When the company auto- mated the casting process, it ...


    By Scientific Dust Collectors

  • The Use of Particulate Emission Monitors to Support Arrestment Plant Operation and Upkeep

    The operation of filtration type arrestment plant can be optimised by the effective use of Particulate Emission Monitors (eg Filter Leak Monitors and Filter Performance Monitors). Particulate Emission Monitors are installed throughout the broad spectrum of industrial processes to satisfy regulations (IPPC, Part B Guidance Notes, WID and LCPD) for emission limit enforcement. In addition, where ...


    By PCME Ltd

  • Choosing a Cyclone Collector

    CYCLONE COLLECTORS Many of us have seen the large funnel shaped mass of metal sitting outside of a manufacturing facility, school or processing plant. These are cyclone dust collectors and they come in many shapes and sizes. If you are curious how they work or are wondering which one will be the right one for your process, read on. HOW THEY WORK Cyclone dust ...


    By ProVent, LLC

  • All About Anti Bacterial Best Steam Cleaners

    The rather grandiose name, anti bacterial best steam cleaners, provides most of the information about these machines. These are the best steam cleaning machines that sanitize the surface in addition to cleaning it. Why Choose Anti Bacterial Machines? Floor steamers clean the hard surfaces by their high temperature output. The temperature can reach up to 386ºF. Many species ...


    By Daimer Industries Inc.

  • Cereform - case study

    As part of the global AB Maury Group, Cereform is providing a comprehensive range of technical bakery ingredients like dough conditioners and softeners, bread mixes and concentrates, soya flours, cake mixes and concentrates, donut mixes and concentrates and toppings, fillings and icings. During the production of these products they have various dust producing processes. One of the processes ...


    By Western Air Ducts (UK) Ltd.

  • Automated dosing of dry treatment chemical with flexible conveyor improves accuracy, safety of filtration system

    Oberlin Filter Company is a global leader in high pressure flat-bed, liquid-solid filtration systems for demanding applications such as filtering heavy metals and resins from colloidal suspensions. The company's top-of-the-line DMax™ filtration system, which cleans 'impregnation resin' wastewater, requires a dry chemical delivery system that provides more precise, cleaner, and safer dosing than ...


    By Flexicon Corporation

  • Advice from HVAC experts!

    HVAC systems (cooling and heating) can use 60-70% of the overall energy in your facility. Proper maintenance is one of the key recommendations for maintaining your system’s performance. To really help extend the life of your system, it could be something as simple as changing and cleaning the filters regularly. If you have a ...

  • Global Polyphenylene Sulfide (PPS) demand is expected to reach 170 kilo tons by 2020 growing at a CAGR of over 10% from 2013 to 2020

    The global market volume for Polyphenylene Sulfide (PPS) is expected to be over 170 kilo tons by 2020, according to a new study by Grand View Research, Inc. Growth in global automotive industry; particularly in China is expected to drive the demand for PPS. In addition, the favorable regulatory scenario in China with regards to the automotive industry is expected to further augment the demand for ...


  • The power of prevention

    Most people already try to eat well to avoid gaining weight. They keep active to avoid getting rusty and they swallow vitamins to stave off colds… the power of prevention is ingrained in the majority of people, and they wholeheartedly follow the latest fads to keep up with society. But how much more could people do to prevent getting sick? A lot more, it turns out. The more people know, ...


    By Allerair Industries

  • Office Printers Emit Ultra fine particle pollution

    We’ve heard quite a bit about particulate matter PM10s and PM2.5s as components of air pollution that we are exposed to on a daily basis. Recent research papers are highlighting the dangers of ultra fine particles (UFPs), which have a diameter of less than 0.1 micrometres (or 100 nanometres). By contrast, the diameters of particulate pollution from PM10s and ...


    By Commercial Air Filtration

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you