Only show results available in Virginia? Ok

dust meter Equipment

  • Emiotest - Model 3114 - Gravimetric Dust Meter Set

    Automatic dust meter EMIOTEST 3114, in its innovative technical solution, is a portable device designed to perform, in closed channels, periodic measurements of dust concentration in the flue gases and a dust mass stream (eg. in the exhaust) to define the emission of dust into the atmosphere. The measurement method is based on the isokinetic ...

  • Coal Dust Explosibility Meter (CDEM)

    Measures percent rock dust in coal mine dust samples, Portable direct-reading instrument, Instantaneous explosibility indication, Easy-to-read digital display, MSHA approved (18-A 110002-0)

    By Sensidyne based in St. Petersburg, FLORIDA (USA).

  • Premium

    HORIBA - Model APDA-371 - Ambient Dust Monitor

    The APDA-371 automatically measures and records airborne particulate concentration levels (in milligrams or micrograms per cubic meter), using the industry-proven principle of beta ray attenuation. Thousands of this Dust Analyzer units are currently deployed worldwide, making the unit one of the most successful air monitoring platforms in the ...

    By HORIBA Europe GmbH based in Leichlingen, GERMANY. from Process & Environmental - Ambient Monitoring Product line

  • Dust Generator - Model SAG 410 - Dust Feeder and Disperser

    Dust is defined as a dispersion of fine solid particles in gas. It is often needed for tests, research and quality assurance tasks. For that the particle concentration and the particle size should be known and adjusted. A proven method for metering powder to the disperser is to use a moving toothed belt. The well defined spaces between the teeth ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Generation from Solid Particles - Dust Disperser Product line

  • Diffused Emissions System

    In the case of diffused emissions Labiotest suggests using fixed and movable spraying systems called La.Biofog with ranges from 25 to 60 meters or spraying systems at a high pressure with specific nozzles distributing tiny drops of water that collide with the dust particles, to encapsulate them and have them fall to the ground due to gravity. The ...

    By Labiotest Srl based in Povoletto (UD), ITALY. from Dusts Abatement Product line

  • Model EMS411 - Dust Monitor

    The EMS411 Dust provides continuous, low maintenance, precision measurement of dust (mg/m3(N), Optical Density and Opacity. It is designed for monitoring visible smoke and particulate concentrations in the exhaust gas of industrial combustion or air filtration processes.

    By Environmental Monitor Service, Inc. based in Yalesville, CONNECTICUT (USA). from Dust Monitors Product line

  • Model DB-30 - Dust and Odor Control System

    For smaller jobs, the DustBoss 30 (DB-30) outperforms its size, capturing dust particles more effectively than many larger machines. The versatile unit has a reach of 100 feet (approx. 30 meters), able to deliver exceptional coverage of a 31,000 square foot (2,880 square meter) area from a standard ⅝” garden hose. Because of its ...

    By Dust Control Technology based in Peoria, ILLINOIS (USA). from Dust and Odor Control Systems Product line

  • Model S1300H - Dust Extractors

    A powerful but quiet dust extractor equipped with double H13 filter. 15 litre recovery bag that is protected by a container. Jets pulsing for effective filter cleaning. 5 meter hose complete with cleaning equipment. Tested and approved by BIA in Germany in accordance with BIA class H, approval number 0405013.

    By PullmanErmator AB based in Smedjebacken, SWEDEN. from Single-Phase Dust Extractors Product line

  • Model DB-60 - Dust and Odor Control System

    The DustBoss® 60 (DB-60) is a ducted fan unit built specifically to optimize droplet size and velocity for maximum particle capture. With a range of more than 200 feet (approx. 60 meters), the design is capable of blanketing a 125,000 square foot area from a single location.

    By Dust Control Technology based in Peoria, ILLINOIS (USA). from Dust and Odor Control Systems Product line

  • Model DPM-4000 - Real-Time Diesel Particulate Monitor

    The product is designed for measuring diesel particulate matter for Industrial Hygiene and Environmental air investigations. The DPM-4000 is individually worn and offers immediate determination and data storage of air borne diesel particulate concentrations in micrograms per cubic meter. This is the only commercially available personal direct ...

    By Environmental Devices Corporation (EDC) based in Plaistow, NEW HAMPSHIRE (USA). from Haz-Dust Devices Product line

  • Model S26 - Dust Separators

    Powerful dust separator suitable for fine dust. Can handle building, grinding, plaster and concrete dust. Equipped with a fine filter (flushable) and H13 filter which meets the asbestos requirements. An hour counter and vacuum meter for filter control are supplied as standard. Collection in Logopac (20 m plastic bag). Efficient air pulse cleaning. ...

    By PullmanErmator AB based in Smedjebacken, SWEDEN. from Single-Phase Dust Extractors Product line

  • DustBoss - Model DB-45 - Portable Dust and Odor Control System

    A mid-sized unit that delivers outstanding control of airborne particles and surface dust, the DustBoss® 45 (DB-45) uses less water and manpower than traditional hand spraying techniques, but covers up to 74,000 square feet (6,875 square meters). The portable DB-45 is well suited to indoor and outdoor recycling areas, crushing, bulk material ...

    By Dust Control Technology based in Peoria, ILLINOIS (USA). from Dust and Odor Control Systems Product line

  • Chain Conveyors

    Different possible axis height of pinions and foot pulleys according to the chain type optimizing the conveyor discharge. Without this system, some chains lift up over a few meters before discharge head preventing a complete discharge of the unit. The chain trajectory is then adjusted as close as possible to the bottom. As an option, a rounded ...

    By Stolz based in Paris, FRANCE. from Dust Extraction - Mechanical Handling Product line

  • Model S 13 - Silent Dust Separator

    Silent dust separator equipped with fine filter (can be flushed) and H13 filter, which meets the asbestos requirements. Efficient air pulse cleaning. Collection in 15 litre plastic bag, also available with Longopac as an option. Socket with self-start for the connection of electric tools. 4 metre suction hose and vacuum meter for filter control. ...

    By PullmanErmator AB based in Smedjebacken, SWEDEN. from Single-Phase Dust Extractors Product line

  • Hoyt - Model 5000 Series - Analog Meter

    The 5000 Series consists of a popular industrial styled Lexan case that has a gasket for harsh environmental applications which seal out dust and other air-suspended damaging particles. A Nema 4 external gasket is optional. This Series is available with optional stud placement configurations for panel interchangeability. This built-in ...

    By Hoyt Electrical Instrument Works, Inc. based in Penacook, NEW HAMPSHIRE (USA). from Generator Meters Product line

  • Model 205 - Clamp On Meter

    The True RMS Clamp-On Meter 205 is safety rated at 600V CAT IV. It measures AC + DC volts and amps, frequency, continuity, resistance and can also perform diode checks. It also measures Power and Power Factor, phase rotation, and THD. A Delta relative function allows new measurements to be compared to a reference value and a MIN/MAX function keeps ...

    By AEMC Instruments based in Dover, NEW HAMPSHIRE (USA). from Clamp On Meters Product line

  • Model LM3086 - Dust & Opacity Monitor

    The new performance standard in opacity/dust monitoring, fulfilling U.S EPA 40 CFR Appendix B, PS1 requirements. LM 3086 EPA3 continues to be the standard for performance in opacity/dust monitoring after more than 1000 installations worldwide and more than 500 in the USA alone. It fulfills the U.S EPA 40 CFR Appendix B, PS1 requirements and is TUV ...

    By Cemtrex Inc. - Monitoring Instrument & Products Division based in Farmingdale, NEW YORK (USA). from Dust & Opacity Monitoring Product line

  • Model DC-100, DC-500 & DC-1000 - Dust Collectors

    Acrison Pulse-Jet Dust Collectors have been designed primarily for use with Acrison dry solids metering/hoppering equipment as a clean, safe and efficient means of collecting dust typically generated when product is being loaded into Acrison supplied equipment (i.e., storage bins or hoppers), while prohibiting the dust from escaping into the ...

    By Acrison, Inc. based in Moonachie, NEW JERSEY (USA). from Dust Collectors & Bag Dump Stations Product line

  • Premium

    NEO Monitors LaserDust - Model MP, LP, XLP - Medium Path, Long Path & Extra Long Path Monitors

    NEO Monitors LaserDust Medium Path (MP), Long Path (LP), and Extra Long Path (XLP) Monitors are compact, optical dust monitors for true continuous in-situ measurement of dust concentration or opacity. The monitors are designed for measurement across pipes, stacks, and ducts with typical path lengths of 0.5 – 10 m LaserDust Monitors use a ...

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Multical - Model 801 - Heat & Cooling Meters

    MULTICAL 801 – is a high end thermal energy calculator for industrial applications. Effectively protected against dust and humidity and backlit display. A wide range of built-in functions makes this energy meter a single box solution.

    By Kamstrup A/S based in Skanderborg, DENMARK. from Thermal Energy Meters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you