Dust Sampling Equipment For Air And Climate Near USA
-
Manufactured by Sigma-Aldrichbased in USA
The diffusive bodies are designed to house Radiello cartridge adsorbents during sampling. The diffusive bodies are threaded at one end for easy attachment to the Radiello triangular support plate. Unlike most of the cartridge adsorbents, the diffusive bodies are reusable and can be cleaned with a mild detergent between use. The diffusive bodies will collect dust (especially during outdoor ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Diffusive Bodies white, configured for general use, pk of 20. ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Diffusive Bodies permeative, configured for anaesthetic gases and vapors, pk of 20. ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Diffusive Bodies blue, configured for sampling light sensitive compounds, pk of ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Measures percent rock dust in coal mine dust samples, Portable direct-reading instrument, Instantaneous explosibility indication, Easy-to-read digital display, MSHA approved (18-A ...
-
Manufactured by VIG Industriesbased in USA
The VIG Industries, Inc. Model 300 is designed to measure a single gas (or two with oxygen option). The Model 300 optical bench consists of the IR source, sample cell, and patent pending detector. The source control circuit provides a controlled current square wave to the infrared source. No mechanical chopper is used so there are no moving parts in the Model 300 optical bench which require ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The PM2.5 monitor version of OPSIS’ SM200 particulate monitor offers accurate and reliable automatic measurements of PM2.5 particulate fraction concentrations in ambient air, and sampling of the PM2.5 particulate fraction for later manual ...
-
Manufactured by VIG Industriesbased in USA
The VIG Industries, Inc. Model 300/2 is designed to measure a two gasses (or three with oxygen option). The Model 300/2 optical bench consists of the IR source, sample cell, and patent pending detector. The source control circuit provides a controlled current square wave to the infrared source. No mechanical chopper is used so there are no moving parts in the Model 300/2 optical bench which ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The PM10 monitor version of OPSIS’ SM200 particulate monitor provides accurate and reliable automatic measurements of PM10 particulate fraction concentrations in ambient air, as well as sampling of the PM10 particulate fraction for subsequent manual ...
-
Manufactured by SKCbased in USA
Reliability and simplicity make the SKC Sidekick a good entry level pump, whilst high build quality means it won't let you down. Available in three models including two ATEX approved models. All models offer a wide flow range of 5-3000 ml/min, which means the Sidekick is suitable for dust and gas sampling projects. The lower flows are achieved with the constant pressure controller and low flow ...
-
Manufactured by Sabio Environmentalbased in USA
Collecting and distributing homogenous air samples for analysis is easy with the Model 1002 and 1004 heated sample manifolds. With the ability to work equally well in dry, humid or chemically harsh environments, each manifold is well suited for any monitoring project. For durability and reactive inertness, the Model 1002 is constructed of 316 stainless steel and the Model 1004 is constructed with ...
-
Manufactured by Xenemetrix Ltd.based in ISRAEL
Key Applications: glass, earths, cement, plaster, ceramic materials, minerals, silicates, geological and mineralogical ...
-
Manufactured by Eurofins Built Environment Testing EMLab P&Kbased in USA
The Micro-Vac cassettes are designed for the collection of fibers and particulate from carpets and other dusty areas. These specially designed cassettes have an inlet port angled at 45 degrees and come preloaded with .45ยต MCE ...
-
PremiumManufactured by ENVEAbased in FRANCE
The measurement result of the sensor is only as good as the reference to which it has been calibrated. For this reason we have developed the dosed-reference-method as an alternative to isokinetic dust sampling. The main basic idea of this is that a mass flow is dosed into the system which corresponds to a required concentration at a specific flow ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
The Mill-Gard CO detection system provides early warning of a fire within coal pulversizers and silo’s. Designed specifically for use in coal-fired power stations, the system uses powerful pumps to extract air samples from the coal mill via hardened sample probes. The air samples are conditioned and passed over industrial grade C.O. (carbon monoxide) sensors to quickly detect an increase in ...
-
Manufactured by Durag Groupbased in GERMANY
Ambient air particulate monitor to detect TSP, PM10 or PM2.5 in ambient air for use in industrial or governmental ambient air monitoring ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or stack. Its dual-pass optical arrangement is based on twin transmissometers measuring in opposing directions through the same section of the gas stream, providing not only an accurate average of the dust loading, but ...
-
Manufactured by Bladewerx LLCbased in USA
The Bladewerx EpeeCAM™ is an ultra-compact Continuous Air Monitor capable of real-time detection of alpha and beta emitting particulates. The Bladewerx EpeeBZM™ is the wearable Breathing Zone Monitor version, boasting a remote sampling head to be clipped near the worker’s lapel. The flexible design provides a high-performance platform for detecting trace amounts of ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon Micro-Vac cassettes are designed for the collection of fibers and particulate from carpets and other dusty areas. They are specially designed with an inlet port angled at 45 degrees and come preloaded with .45µ ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Escort LC Air Sampling Pump can be used with a variety of personal and area sampling devices to collect such airborne contaminants as asbestos fibers, toxic gases, vapors, particulates, fumes and mists. It can also be used to sample silica dust, coal dust and organic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you