Emissions Control Applications available in Slovakia
-
Premium
Continuous emissions monitoring for real driving emissions
There are many cars that have a large impact on the environment in many places around the world. The emissions from fossil fuel cars are too high, and previous test methods have not given the full picture. Tests in a laboratory has, so far, been made indoors, in laboratories, and they do not match the reality, as they do not take into account the real driving conditions. Therefore, we have developed an accurate and reliable monitoring system that can measure the emissions in real life conditions. Based on our core ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Measurements Solutions for Automotive
The automotive industry is dependent on the adoption of advanced manufacturing technologies to enable the production of high quality, precision components that are crucial to ensuring performance. The global push for higher efficiency standards, tighter emission controls and a reduction in the allowable cabin noise have prompted a shift to smoother surfaces and complementary metrology methods. The industry is also witnessing the transition from off-line quality control inspection to on-line or in-line ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Activated carbons solutions for tobacco sector
Since its first discovery by Europeans more than 500 years ago, the consumption of tobacco has been a contentious issue. The effects are well documented, especially from refined products such as cigarettes, cigars and pipe smoking. Nevertheless, the use of tobacco products persists and as the market is highly subjective in relation to the experience of taste and odour, the modification of these sensory perceptions has seen the incorporation of activated carbon into smoking devices. High surface area activated ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
Emission control solutions for clinker cooler and pre-heater dedusting sector
The control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler, is usually a problem for cement plant managers. The process is characterized by high material abrasiveness, high loads and variable flow rate in normal and maximum ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Emission control solutions for pyrolisis, incineration and gasification sector
Thermal decomposition processes (TD Processes), such as Pyrolisis, Incineration and Gasification are increasingly related with carbon capture, originated from several sources, from RDF to Biomass. CO2 is not solid and thereby it is impossible for it to be captured or filtered. However, several technologies are emerging for the conversion of biomass to fuels and thereby storing CO2 on a solid form. Bioenergy with carbon capture and storage (so called BECCS) is the process of using biomass, such as trees, crops, or ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Air pollution, emission and process monitoring systems for water & liquids
Mercury is one of the most toxic elements that may be found in natural water bodies and can negatively affect living organisms, human health as well as drinking water quality. In addition, water is the main transportation and transformation pathway of mercury into the environment and living organisms. Mercury analysis in water is of great importance, in order to monitor water quality and associated environmental stresses. Mercury is also known to be a persistent, bio-accumulative toxin, indicating that its ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Gas monitoring for steel applications
The combustion operations the iron and steel processes produce emissions which are subject to strict environmental regulations. Plants are required to monitor and control these emissions. This also provides process efficiency ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Air pollution, emission and process monitoring systems for incineration
ENVEA’s long association with the Incineration Industry includes supporting Process Operators to meet environmental obligations and the requirement for high performance instrumentation with quality assurance features for compliance reporting. In addition to the importance of regulatory compliance, the control and treatment of emissions from Incineration processes represents a significant proportion of overall costs, therefore, quality data from emissions and process monitoring provides valuable feedback on ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Air pollution control for the paint & painted products industry
Anguil’s engineering expertise and flexible solutions guarantee destruction efficiency and optimized performance so your plant can focus on producing quality painted ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Air Quality and Noise Monitoring for Roadside Traffic
Vehicular emissions are the major sources of urban pollution and also affect about 55% of the total human population. The emissions from motor vehicles contribute to hazardous pollutants like nitrogen dioxide, carbon monoxide, and suspended particulate matter. These pollutants cause respiratory diseases and increase the chances of life-threatening diseases amongst the ...
By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.
-
Premium
Flue gas denitration on-line continuous monitoring solution
Nitrogen oxide (NOx) is one of the main sources of air pollution, not only it has significant influence on global warming, but also involved in the destruction of the ozone layer. Technical measures to control NOx emissions can be divided into two categories: one is so-called source control, the characteristic is by a variety of technical means, to control NOx generation in the process of combustion reaction (i.e., low NOx combustion technology). Another kind is the so-called tail control, the characteristic is ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Air pollution control for ventilation air methane industry
Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Gas analyzers from combustion: control emission monitoring
Today different ministerial directives lead the market to follow the industries. There are power stations, incinerators (domestic wastes, mud, hospitals…) cement industry, ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Continuous emissions monitoring for cement industry
Process control and emissions monitoring in cement plants, can be a challenge due to the dusty and corrosive environment. OPSIS provides an accurate system that will operate with high performance and a minimum of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas monitoring for industrial processing applications
Temperature measurements play critical roles in a number of diverse industrial processes. AMETEK Land provides expert solutions to support product quality, process efficiency, safety and emissions control. Our industry-leading non-contact measurement instruments deliver essential temperature data for industry sectors including metals, non-wovens, paper and plastics. We also supply effective emissions monitors and conveyor belt scanners. AMETEK Land has more than 70 years’ experience in providing ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Activated carbons solutions for air and gas treatment industry
Air and Gas Treatment: the Challenge Treatment of air and process gases typically has two fundamental drivers: regulatory compliance and/or product purity. Many industrial operations face increasingly stringent discharge limits on volatile organic compounds (VOCs). From a process purity standpoint, many process gases contain undesired impurities that can be removed with Jacobi’s EcoSorb and AddSorb products. ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
Emission control solutions for fuel oil combustion sector
For PM emission control in high temperature exhaust streams, such as those from fuel oil boilers, common dedusters like bag filters, have very high maintenance costs. The diesel and fuel oil fly ash can be quite sticky and clog to filter elements, which can be minimized with costly protection reagents or frequent filter elements changes. Fuel gas cooling is needed in front of the filter when temperatures are higher than ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Ambient air quality monitoring solutions for benzene fence-line monitoring
To monitor benzene emissions can be a challenge, but OPSIS makes it easy. Benzene is an aromatic hydrocarbon liquid that evaporates quickly if exposed to ambient air. It is one of the most commonly used substances in the chemical industry and it is known to cause cancer. For this reason, refineries in the United States must start monitoring fugitive emissions of benzene from January 30, 2018. This is part of the 2015 U.S. EPA Petroleum Refinery rule. In case a yearly rolling average of benzene concentrations ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas analyzers and monitoring systems for fertilizer and nitric acid production sector
Nitric acid is manufactured from ammonia and is a key chemical in the manufacture of fertilizers. This is the main reason why nitric acid is produced in such large quantities. The production process of nitric acid produces nitrogen oxides (NOx), ammonia (NH3) and nitrous oxide N2O ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Air pollution control for the coating & converting industry
Protect Your Quality Coating Reputation. Anguil’s Engineering expertise and flexible solutions guarantee VOC/HAP destruction efficiency and optimized performance so your plant can focus on quality coated ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you