Emissions Control Applications in USA
-
Premium
Air pollution control for the coating & converting industry
Protect Your Quality Coating Reputation. Anguil’s Engineering expertise and flexible solutions guarantee VOC/HAP destruction efficiency and optimized performance so your plant can focus on quality coated ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Process monitoring solutions for NH3 truck engine monitoring
A new EC regulation states that diesel engines need to have active cleaning with urea injection in order to reduce NOx emissions. In order to control the urea dosage, a reliable measurement system is required. OPSIS LD500 laser diode gas analyser for monitoring ammonia (NH3), has been tested and approved by German TÜV, in accordance with the EURO VI ...
By OPSIS AB Distributor in , ILLINOIS (USA).
-
Premium
Erosion and dust control solutions for heavy haul road stabilizer sector
Used on heavy haul roads, Envirotac prevents dust, wear, and erosion. Further, it helps saving water, preventing equipment damage due to dust, preventing loss of tire tread due to road wear and reducing emissions from equipment that would normally be used to maintain the ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
HEPA filter emission monitoring for pharmaceutical powder processing
In the pharmaceutical industry, finished powders are often transferred from the mixing area to tableting machines via vacuum transfer systems. Transfer lines incorporate a high efficiency HEPA filter after the vacuum pump to prevent exposure to potentially harmful dust in the workplace. HEPA filters can become less effective due to operational wear and tear or through possible mishandling during maintenance work. An effective solution to remotely monitor the HEPA filter performance can enable proactive filter ...
By ENVEA Distributor in Littleton, COLORADO (USA).
-
Premium
Activated carbons solutions for oil and gas industry
The Challenge: Managers of petrochemical facilities today are faced with striking a difficult balance between optimizing the operating the refinery to maximize profits and complying with increasingly stringent environmental regulations governing air and water emissions from the facility. Jacobi fully understands the scale and nuances of refinery operations, and we have developed a full range of activated carbons to meet every challenge in typical refinery ...
By Jacobi Group Office in Columbus, OHIO (USA).
-
Premium
Air pollution, emission and process monitoring systems for water & liquids
Mercury is one of the most toxic elements that may be found in natural water bodies and can negatively affect living organisms, human health as well as drinking water quality. In addition, water is the main transportation and transformation pathway of mercury into the environment and living organisms. Mercury analysis in water is of great importance, in order to monitor water quality and associated environmental stresses. Mercury is also known to be a persistent, bio-accumulative toxin, indicating that its ...
By ENVEA Distributor in Littleton, COLORADO (USA).
-
Premium
Air pollution, emission and process monitoring systems for leakage detection
Your facilities and equipment can cause fugitive emissions, leading to environmental pollution and financial losses for your business. We offer a wide range of gas and particulate analyzers to monitor 24h/day your facility and accurately identify sources of leaks. Odors can thus be immediately linked to your operations, identify system leaks, and act quickly to reduce them for the comfort and the health of all, employees and residents. This proactive approach provides tangible elements in reducing complaints ...
By ENVEA Distributor in Littleton, COLORADO (USA).
-
Premium
Gas monitoring instruments and systems for engine emissions measurements
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
By Gasmet Technologies - a Nederman company Distributor in Simi Valley, CALIFORNIA (USA).
-
Premium
Gas analyzers and monitoring systems for fertilizer and nitric acid production sector
Nitric acid is manufactured from ammonia and is a key chemical in the manufacture of fertilizers. This is the main reason why nitric acid is produced in such large quantities. The production process of nitric acid produces nitrogen oxides (NOx), ammonia (NH3) and nitrous oxide N2O ...
By Gasmet Technologies - a Nederman company Distributor in Simi Valley, CALIFORNIA (USA).
-
Premium
Air pollution control for the food & beverage processing industry
The Food and Beverage industries are rapidly evolving and highly regulated. Partner with Anguil’s vast industry experience and breadth of solutions to solve your toughest air and water pollution ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Emission control solutions for high temperature separation processes sector
Separating particles from the air at high temperature serves multiple needs that go from thermal energy recovery in several industries to improving the economics of power and incineration ...
By Advanced Cyclone Systems, S. A. (ACS) Office in Tampa, FLORIDA (USA).
-
Premium
Air pollution control for the composite & carbon fiber industry
Ensure Worker Safety and Reduce Production Costs. Anguil’s engineering expertise and reliable environmental solutions can reduce the cost of manufacturing and keep pollutants from reaching workers or the community. ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Environmental Data Monitoring Solutions for Air Quality and Emission
There are two types of stationary air pollution sources: Point source pollution (boiler rooms, process, power stations, etc…). Surface pollution (landfill sites, farms, etc…). The main pollutants concerned are mercury, NOx (produced by combustion), VOCs, heavy metals, dioxins (mainly produced by incineration plants), as well as smells (e.g. treatment of co-products in the food processing industry). ECOMESURE provides instruments that measure the pollutant concentration coming out of industrial sites ...
By Ecomesure Distributor in Cleves, OHIO (USA).
-
Premium
Gas monitoring for industrial processing applications
Temperature measurements play critical roles in a number of diverse industrial processes. AMETEK Land provides expert solutions to support product quality, process efficiency, safety and emissions control. Our industry-leading non-contact measurement instruments deliver essential temperature data for industry sectors including metals, non-wovens, paper and plastics. We also supply effective emissions monitors and conveyor belt scanners. AMETEK Land has more than 70 years’ experience in providing ...
By AMETEK Land Instruments International Ltd Distributor in Cartago, USA.
-
Premium
Continuous emissions monitoring solutions for waste to energy plants
Process control and emission monitoring in a waste to energy plant is a challenge. A large number of gaseous components need to be measured with high accuracy. Almost 100% uptime is required and the monitoring system needs to be easy to maintain and fast to calibrate. The OPSIS system is tested and approved to have the best performance and longest calibration intervals, and provides the waste to energy plant with an accurate analyser that will operate with a minimum of ...
By OPSIS AB Distributor in , ILLINOIS (USA).
-
Premium
Emission control solutions for oil & gas industry
In Fluid Catalytic Cracking (FCC) processes, widely used in oil refineries, the separation and recovery of powder catalysts is a major concern. Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn't represent any environmental harm in the past, they were not controlled by any separator or filter. Plant managers main concern was to clean a fraction of the gas to produce energy in a Turbo Expander, or similar, while concentrating the ...
By Advanced Cyclone Systems, S. A. (ACS) Office in Tampa, FLORIDA (USA).
-
Premium
Emission control solutions for calcination and mineral processing sector
Calcination is a process that involves heating a substance, typically a solid material, at high temperature with limited supply of air or oxygen. The purpose of calcination is to remove volatile components and drive off impurities or to transform the material into a more desirable form for further ...
By Advanced Cyclone Systems, S. A. (ACS) Office in Tampa, FLORIDA (USA).
-
Premium
Gas analyzers and monitoring systems for carbon capture & storage (CCS)
Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of ...
By Gasmet Technologies - a Nederman company Distributor in Simi Valley, CALIFORNIA (USA).
-
Premium
Emissions monitoring for waste incineration
Process control and emission monitoring in a waste to energy plant is a challenge. A large number of gaseous components need to be measured with high accuracy. Almost 100% uptime is required and the monitoring system needs to be easy to maintain and fast to ...
By OPSIS AB Distributor in , ILLINOIS (USA).
-
Premium
Continuous emissions monitoring for brick plants
Process control and emissions monitoring in a brick plant is a challenge due to the high concentrations of HF. The HF is generated in the process and gas phase HF can reach 50 mg/m3 or more. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB Distributor in , ILLINOIS (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you