Emissions Data Equipment For Air And Climate In Australia
-
PremiumManufactured by ENVEAbased in FRANCE
Provides continuous measurement values for dust concentration as a trend signal or absolute values. The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission ...
-
Manufactured by Magaldi Power S.p.A.based in ITALY
The MCC (Magaldi Casting Cooler) is today a well-proven technology for castings conveyance and air cooling, that combines the outstanding reliability of the Magaldi Superbelt® to an efficient cooling ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON’s Jordan Technologies pioneered and holds the patent on vapor recovery continuous emission monitors (CEMs). Manufactured with high-quality components, and fully compliant with the US EPA 40 CFR Part 63 Subpart BBBBBB, our CEMs are built to withstand the roughest field conditions. AEREON guarantees our monitors to be reliable and ...
-
PremiumManufactured by ENVEAbased in FRANCE
The measurement result of the sensor is only as good as the reference to which it has been calibrated. For this reason we have developed the dosed-reference-method as an alternative to isokinetic dust sampling. The main basic idea of this is that a mass flow is dosed into the system which corresponds to a required concentration at a specific flow ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS CEM systems measure multiple emissions or process gases in real time in situ. Using the DOAS (Differential Optical Absorption Spectroscopy) technique, the system is non-contact, with fast ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS data logger system is designed for data acquisition applications. The data logger can handle analogue and digital input and output signals as well as serial ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Method 17 Isokinetic Sampling System, featuring the XC-53 metering console, is ideal for collecting and determining in-stack particulate emissions from a wide variety of sources. Particulate emissions are commonly sampled from coal-fired power plants, cement kilns, asphalt plants, incinerators and industrial sources. Emissions data can be used for determining compliance ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME STACKFLOW 400 is an advanced flue gas flow measurement system for continuous monitoring of releases from industrial sources complying with European monitoring standard EN 16911-2:2013 and ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Mercury CEM (HgCEM) Systems are currently operating at over 130 sources to comply with strict US EPA regulations. In addition, there are numerous installations in Asia and Europe. For every installation, we have met and exceeded all performance requirements for our customer’s state and federal regulations. The Series 3400 is designed to measure total gaseous mercury emissions, ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
The NIR-Borescope-640-EX is a short wavelength radiometric infrared borescope imaging camera for steam reformer and cracker tube continuous temperature measurement and furnace optimisation and ...
-
PremiumManufactured by ENVEAbased in FRANCE
The ProSens was specially developed to carry out reliable dust measurement on clean sides after ...
-
Manufactured by Scag Power Equipmentbased in USA
Tough jobs demand tough products and Scag Giant-Vac tow behind truck loaders are ready to meet the challenge. Utilizing all-welded steel construction along with commercial grade quality throughout the entire line helps us maintain our time-proven reputation for rugged, durable and dependable products that are built to last and ...
-
Manufactured by Unisense Environment A/Sbased in DENMARK
The N2O Wastewater Controller shows you the temperature compensated N2O levels, emission rates, and process temperatures from up to two N2O Wastewater Sensors. Direct Data Collection and Transmission; With the N2O Wastewater Controller, you collect data from the N2O Wastewater Sensors. You can connect the controller to your plant's PLC or SCADA system to automate the collection of data. You can ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The GCEM40E hot extractive multi-channel gas analyser is CODEL’s industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on a wide range of applications where the flue gas temperature is abnormally high, low or saturated. Three decades of development, knowledge and practical experience have been utilised to produce this advanced technology gas ...
-
Manufactured by Applied Spectra, Inc.based in USA
Not all LIBS spectrometers are created equal. The Aurora LIBS Spectrometer—designed by the LIBS experts at Applied Spectra—delivers the high spectral resolution and precise gate timing control required for effective LIBS analysis. Aurora’s flexible number of spectrometer channels makes it an ideal detector for broadband as well as narrower band analysis focusing on a few ...
-
Manufactured by Perma Pure LLC - a Halma Companybased in USA
Perma Pure’s Marine-GASS Nafion tubing based Sample Conditioning Systems is the smart solution for Marine CEMS. Designed specifically to handle harsh shipboard applications, the system ensures long term reliability of SO2 measurements according to MEPC 184(59). Because the level of SO2 is so low coming out of the scrubber, a peltier based cooler is unable to condition the sample effectively ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Capable of measuring up to five different gases simultaneously, the 910 is a complete analysis system, with a sample extraction and transport designed for maintaining sample integrity. Delivering multi-component analytical performance that typically requires two or more separate analyzers, it provides a cost-effective alternative for the monitoring of multiple gases. An optional zirconium oxide ...
-
Manufactured by TSI Incorporatedbased in USA
The Series 6300 CA-CALC Compliance Protocol Exhaust Emissions Analyzers guide consultants and boiler service professionals through each step of the CTM-34 test protocol, provide mass emissions calculations of exhaust emissions and print reports on site. These features streamline the testing process so the user can complete periodic combustion testing quickly and with ensured accuracy. Additional ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you