Emissions Management Applications available in Ecuador
-
Premium
Erosion and dust control solutions for oil & gas industry
Envirotac line of polymers are the perfect solution for oil roads, oil pads, storage areas, and even frac pond lining. When Envirotac bonds the soil particles, it will create a tough durable surface that will withstand heavy loads and adverse weather conditions. It works better than conventional methods at a fraction of the cost. The time frame required to construct with Envirotac is greatly reduced, so you can start work ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
Industrial equipment solutions for oil and gas industry
Industrial equipment solutions for oil & gas ...
By Koller Maschinen- und Anlagenbau GmbH based in Celle, GERMANY.
-
Premium
Continuous emissions monitoring solutions for mining & smelting
OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Mineral-based technologies solutions for the Oil & Gas industry
The Global Leader in Handling and Treating Complex Water and Fluid Challenges. The Energy Services segment has, for decades, been the recognized leader in serving two major markets: Oil & Gas and Industrial Wastewater, providing innovative products, services and solutions, and handling and treating COMPLEX water and fluid challenges, cost effectively for their customers worldwide in 14 locations and 10 ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Emissions Monitoring
The Opsis monitoring solution in aluminium smelters is based on either DOAS or laser diode technique. The on-line, open-path systems are used for monitoring HF and sulphur dioxide in potrooms, in fence-line applications and in continuous emissions monitoring. Opsis has long experience of monitoring in aluminium ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Air pollution, emission and process monitoring systems for agriculture
Working with the industry’s leading manufacturers enables ENVEA to understand specific environmental and process monitoring requirements and the ability to provide an extensive range of ambient, emission and process monitoring systems. A choice of measurement technologies monitor and control key areas of the process including storage, handling, drying activities and dust releases to atmosphere to meet and exceed regulatory environmental obligations and help improve process efficiency. ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Activated carbons solutions for air and gas treatment industry
Air and Gas Treatment: the Challenge Treatment of air and process gases typically has two fundamental drivers: regulatory compliance and/or product purity. Many industrial operations face increasingly stringent discharge limits on volatile organic compounds (VOCs). From a process purity standpoint, many process gases contain undesired impurities that can be removed with Jacobi’s EcoSorb and AddSorb products. ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
Air pollution, emission and process monitoring systems for leakage detection
Your facilities and equipment can cause fugitive emissions, leading to environmental pollution and financial losses for your business. We offer a wide range of gas and particulate analyzers to monitor 24h/day your facility and accurately identify sources of leaks. Odors can thus be immediately linked to your operations, identify system leaks, and act quickly to reduce them for the comfort and the health of all, employees and residents. This proactive approach provides tangible elements in reducing complaints ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Air pollution, emission and process monitoring systems for laboratory
Our mercury monitors are designed for fully automatic determination of mercury traces in liquids and sample digests, an alternative solution to complex and time consuming manual techniques, also increasing the precision, efficiency and productivity of your lab. Some of our “ambient” monitors can also be used in laboratory, R&D applications or medical gas purity analysis and monitoring. For instance, number of O342e monitors are used worldwide by various rubber manufacturing companies in Ozone ...
By ENVEA based in Poissy, FRANCE.
-
-
Premium
Gas monitoring and dust monitoring
Laser gas instruments Pulverized coal bunker, Exit of preheater, Main emission chimney, Cooler,exhaust emission chimney, O2, CO, ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Air pollution, emission and process monitoring systems for CEM solutions
With decades of industrial experience, our systems are designed and developed as a complete turnkey solution. From sample extraction, through analysis, data acquisition and report management, each system is configured to comply with the normative demands and technical constraints of our clients, specific to their ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Electronic pressure measurement devices for oil and gas industry
Scientists these days believe that the natural resources of oil and gas are not quite as finite as thus far assumed. These resources are likely to remain available considerably longer than hitherto ...
By BD|SENSORS GmbH based in Thierstein, GERMANY.
-
Premium
Continuous emissions monitoring solutions for palm oil plants
Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Chemiluminescense based analyzer for industrial sector
Focuses on medium NOx, NOx-related and multigas-concentrations up to 5’000 ppm where flexibility is a central requirement. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. Typical supported applications are industrial emission monitoring and gas manufacturing control. ...
By ECO Physics AG based in Duernten, SWITZERLAND.
-
Premium
Measurements Solutions for Automotive
The automotive industry is dependent on the adoption of advanced manufacturing technologies to enable the production of high quality, precision components that are crucial to ensuring performance. The global push for higher efficiency standards, tighter emission controls and a reduction in the allowable cabin noise have prompted a shift to smoother surfaces and complementary metrology methods. The industry is also witnessing the transition from off-line quality control inspection to on-line or in-line ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Gas analyzers and monitoring systems for carbon capture & storage (CCS)
Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Flue gas denitration on-line continuous monitoring solution
Nitrogen oxide (NOx) is one of the main sources of air pollution, not only it has significant influence on global warming, but also involved in the destruction of the ozone layer. Technical measures to control NOx emissions can be divided into two categories: one is so-called source control, the characteristic is by a variety of technical means, to control NOx generation in the process of combustion reaction (i.e., low NOx combustion technology). Another kind is the so-called tail control, the characteristic is ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Ambient air quality monitoring solutions for remote sensing of ship emissions
New regulation forces ships to lower the emissions of SO2. Ships travelling in SECA areas has to either run on low sulphur fuel, or install SO2 scrubbers. To measure the SO2 emissions from a ship is not an easy task. OPSIS provides the Port Authorities with a unique measurement principle where the emissions from the ship is measured remotely. Light is passing the emissions and by analyzing the light, concentrations of SO2 can be ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Air pollution, emission and process monitoring systems for food & pharma
High accuracy measurement and reliability in monitoring instrumentation is called for by Food and Pharmaceutical Processes. ENVEA’s unique capabilities allow the observation and control of many of the manufacturing functions found in these industries. From the measurement and control of emitted dust from dryer filter plant to the non-intrusive, solid state measurement of powder mass flow and the monitoring of process gas quality, ENVEA instrumentation provides Plant Operators with the opportunity to fine ...
By ENVEA based in Poissy, FRANCE.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you