Emissions Management Equipment For Air And Climate Available In American Samoa
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
Shredder: PennyThe Patent Pending MDX Mobile Shredding Units are revolutionary dual mode systems. They are able to be switched between standard and high security modes at the touch of a button. When operating in standard mode the bulletproof ST-15H shredder achieves up to 6,500 lbs/hr of throughput. Activating the high security mode produces an incredibly small DIN certified shred size while ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities, using chemical adsorption. Each particle, or granule, of carbon provides a large surface area, or pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media. One gram of activated carbon has a surface area in excess of 3,000 m2 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The new Dekati MPEC+ (Mobile Particle Emission Counter) is a compact and portable instrument for easy onboard PN-PEMS measurements. At the core of the MPEC+ is the patented Dekati ePNC particle counting technology, which has been further optimized for fast transient emission measurements. The MPEC+ is the device of choice for highly accurate PN-PEMS testing in accordance with RDE requirements. ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A gas analyser using flame detection with a catalytic methanator module to analyse CO and CO2 for monitoring gas purity and electronic gas measurement. A 19" inch rack mountable chassis, 4U high. It has the ability to be used as a fully integrated system for automatic sample analysis as well as it is transportable for use at various sites. Our application flexibility allows the chromaCO start up ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-700 FID is designed to be installed directly upstream of a FTIR analyzer (e.g. Gasmet) to continuously measure the total concentration of hydrocarbons within a gaseous sample. All controls which allow to calibrate the FTIR or FID individually are built in. Sources can be ambient air, exhaust gases from a combustion process e.g. stack emissions, ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The H2S/TOS TS MEDOR® is an industrial gas chromatograph for the analysis and monitoring of sulfur compounds in gas: H2S, Mercaptans, Sulfides and total ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLCT 60 is a generation of high quality gas detectors which covers all industrial needs for a variety of applications. The OLCT 60 Series is composed of several versions: XP or IS sensor (toxic or oxygen versions). Remote or on-board sensor. The OLCT 60AD version allows the sensor to be installed remotely up to 15 meters (standard), allowing detection in inaccessible locations, or in Zone 0 ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Material: Polypropylene caps and outer shell filled with oil-block absorption media. Removal of: free, dispersed and emulsified ...
-
PremiumManufactured by Environmental Products & Applications, Inc.based in USA
With over 27 years in the industry, our certified experts know exactly how to eliminate dust on your site. Over the years, we have developed dust control polymers that work effectively & deliver clients maximum value on their investment. Envirotac dust control polymers reduce fugitive dust emission effectively and are ideal for road construction, airfields, helipads in remote sites & ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5100 is a portable SO2 analyzer adopts ultraviolet fluorescence technique and combines advanced micro processing technology, which could provide accurate and reliable SO2 detection at low level ppb~ppm.This SO2 gas analyzer can be applied to atmospheric monitoring and dilution-based CEMS monitoring ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Measuring CO2 gas involves the use of two main technologies: Tunable Diode Laser Absorption Spectroscopy (TDLAS) and Non-Dispersive Infrared (NDIR). TDLAS is a relatively new technology that relies on the absorption of light in order to measure the concentration of CO2 in a gas. It uses a laser to detect the molecules in a sample, and then calculates the concentration based on their optical ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for specific occasions. After dedusting by sampling probe, tracing by heating ...
-
PremiumManufactured by ENVEAbased in FRANCE
LEAK ALERT 75/80 was specially developed to carry out electrodynamic filter damage and leakage monitoring in industrial filter ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MIR 9000H is a multi-gas analyzer using the Gas Filters Correlation technology (GFC). With its hot measurement principle (180 °C on a hot and humid sample), the MIR 9000H is the perfect tool for the analysis of the main gas parameters in many applications, including DeNOx (SCR / SNCR) and the optimization of flue gas treatment ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compact zero gas system for process and zero gas used in the gas analysis industry. Compressor (Thomas pump type 607CD22) requires no oil. Immediate functional, maintenance-free ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The MDS-26GTE offers all the features of Shred-Tech’s popular MDS-26GT but with electric power. The MDS- 26GTE will get the job done at the customers site or by plugging it in at your facility. While plugged in, the MDS-26GTE will shred at a fraction of the cost of diesel fuel while giving you the additional option of operating indoors without the production of environmentally harmful ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 certified by the TUV following EN 14662-3 for benzene monitoring. Standard measured compounds: Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1-3 Butadiene (up to 40 other compounds on ...
-
PremiumManufactured by Cornell Pump LLCbased in USA
The 1.5CBH pump is designed with Cornell's renowned quality and durability. It features a tangential volute with a 1.5" discharge, 4" suction, enclosed impeller, and 150lb ANSI flanges. A double mechanical seal is ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Integrated pressure monitoring for leak control. Special features: Complete realisation, ranging from the design to the commissioning. Piping systems can be realized in various materials, e.g. in copper or stainless steel. Integration into existing fabrication hall construction is possible. Use of gastight DILO unions without intermediate seal compound. Production in nominal diameters of up to ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are displayed. Furthermore, a real-time display as line diagram is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you