Emissions Management Equipment For Air And Climate Available In Zaire
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Easy handling and individual customizations. With the analyser EasyCEM gases can be measured such as CO, CO2, NO, SO2, SF6, THC with the NDIR method or with PID , as welll as gases like NH3, HCl and CH4 with a TDLS (tunabel diode laser). By extending further modules with NDUV or electrochemical measuring principles, it is possible to measure gases like O2, O3 or NO2. The analyser is particularly ...
-
ShowcaseManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Our flagship model is the i8-1000 line. It took over three years to develop and is at the forefront combustion technology, offering impressive burn rates and large batch sizes while still achieving some of the lowest emissions in its class. The i8-1000 can be customised with external cladding and automatic loading/de-ash to provide an effective and sustainable waste disposal solution for many ...
-
ShowcaseManufactured by VPInstrumentsbased in NETHERLANDS
With the VPFlowScope® In-line flow meter you have the perfect tool for measuring consumption of machines, cost allocation and pressure loss monitoring. The unique design makes this flow meter especially suited for smaller diameters. It is built for small pipes up to ...
-
ShowcaseManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The UV-GAS-500 model gas analyzer is based on DOAS technology,able to measure the concentration of gases including SO2,NO2,NO,NH3,CL2,O3,H2S etc,It has features of high measurement accuracy ,outstandingreliablility,fast response time and wide applicable ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GA-5000 laser gas analyzer uses TDLAS technology and long-path reflection technology, which greatly improves the detection limit. It can analyze O2 , CO2, NH3 , CO , CH4, H2O, HCl, HF, etc, providing a new solution of online measurement of trace gases for natural gas, petrochemicals, environmental protection and steel and other ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's Mikron M315X series are two-piece blackbody calibration sources with a large surface area. Temperature range: Ambient +5 to 400°C (+9 to 752°F). Manufactured and tested to meet rigid quality control standards. High emissivity and ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A gas analyser using flame detection with a catalytic methanator module to analyse CO and CO2 for monitoring gas purity and electronic gas measurement. A 19" inch rack mountable chassis, 4U high. It has the ability to be used as a fully integrated system for automatic sample analysis as well as it is transportable for use at various sites. Our application flexibility allows the chromaCO start up ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Due to the large number of Volatile Organic Compounds (VOCs), there is a need to combine their separation and quantification by Gas Chromatography (GC) with Flame Ionization Detection (FID) and their individual identification by Mass Spectrometry ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Compressor package (single or multi-stage) for compression of process gases (except O2 and Cl). Oil-free compression. Variable drive types: Direct, flange-mounted spur gear or separately arranged. Feasible according to international standards such as API's as well as customer specifications. ...
-
PremiumManufactured by Testo, Inc.based in USA
The rugged testo 350 portable gas analyzer is ideal for a wide range of professional industrial emission measurements and analysis applications, and is excellently suited for complex data compilation using TECsoft emission compliance ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compact zero gas system for process and zero gas used in the gas analysis industry. Compressor (Thomas pump type 607CD22) requires no oil. Immediate functional, maintenance-free ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-300 I dust monitor is a self-developed extraction dust monitor, based on years of technology research and development for dust monitoring. It uses laser forward scattering prnciple to monitor the dust concentration. It owns features of low detection limit(as low as 0.05mg/m3), no interference by moisture with full process high temperature heat tracing for measurment. It can be widely applied ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
Bag filters are used in many industries where filtration is less critical and bags can be easily discarded. Bag filters are used in the natural gas processing industry for amines and glycols and for the treatment of waste water. Water or brine produced from shale gas production is usually treated with bag filters before reuse.additional crushing, pumping into the well in waste wells or sending ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
ESE-IR-100M infrared gas sensor is mainly composed of infrared correlation filter technology (GFC) and self-designed long optical path gas absorption cell (L-Cell), wavelength filter, infrared detector and high-precision signal processing circuit to complete the gas Quantitative analysis in the infrared band. The sensor has the characteristics of high precision, good stability and fast response ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
It is a explosion-proof tunable laser gas analyzer for slipping ammonia emissions monitoring for SCR or SNCR denitration apparatus. The analyzer is a field-mounted slipping ammonia on-line monitor based on TDLAS for NH3 trace analysis with the feature of low detection limit, accurate measurement results, easy calibration and alignment, simple and compact structure, no moving ...
-
PremiumManufactured by ENVEAbased in FRANCE
The STACKFLOW 200 uses the wellestablished Averaging Pitot sensor technology to provide continuous emission monitoring of Flow, Temperature and Pressure. Utilised as a standalone sensor or in combination with Environnement S.A & PCME analyzers and controllers for the monitoring of particulates, gases and flue gas as part of a larger monitoring ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The continuous mode permanent gases monitor. A highly automated system for routine field measurement of permanent gases on the range. The chromaTCD is an automatic industrial gas analyser. The sample comes through the sampling loop. Then the sample is injected into an analytical column for separation. The system uses packed or capillary ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are displayed. Furthermore, a real-time display as line diagram is ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Integrated pressure monitoring for leak control. Special features: Complete realisation, ranging from the design to the commissioning. Piping systems can be realized in various materials, e.g. in copper or stainless steel. Integration into existing fabrication hall construction is possible. Use of gastight DILO unions without intermediate seal compound. Production in nominal diameters of up to ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control, and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for a particular occasion. After dedusting by sampling probe, tracing by ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you