Dust Emissions (Emissions Management) Equipment Available In Armenia
-
PremiumManufactured by ENVEAbased in FRANCE
The Leak Locate 660 PLUS is a dust emission monitoring system incorporating a digital network and advanced graphics capability. It is designed for use in any processes where filter type arrestment plant are used, eg bag, ceramic and cartridge filters. The system comprises up to 32 networked sensors, a central control unit, user interface with ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of dust, smoke and particulates in a ...
-
Manufactured by Seframbased in FRANCE
The SPT150 is a dust emission controller based on the principle of triboelectricity. It consists of two parts: A sensor SPT50 directly installed on the duct to be monitored. The sensor probe is immersed in the particle-laden air stream. It assesses the dust emission rate in real time. A user connection box with user ...
-
Manufactured by Babbitt International, Inc.based in USA
The FT4100 is designed to sense dust emissions passing through a filter in a dust collector or bag house. This very sensitive device allows the user to continuously monitor the level of emission, and record the ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The StackGuard continuously monitors the scatted light intensity of an extracted, withdrawn sample of gas. The laser light source minimized stray light and improves sensitivity to the µg/m³ level, the filtered purge air prevents from window soiling. A calibration check is performed by means of a checking rod. The sample air is led out of the stack, heated up above the dew point and ...
-
Manufactured by Monitor Technologies, LLCbased in USA
The DustTrend ES provides continuous trend measurements that allow plant operators to identify changes in dust emission levels and optimize the facility's filtration systems. ...
-
Manufactured by Seframbased in FRANCE
The SPT50 is a dust emission controller based on the principle of triboelectricity. It consists of two parts: A sensor directly installed on the duct to be monitored. The sensor probe is immersed in the particle-laden air stream. It assesses the dust emission rate in real time. A user connection box directly connected to the ...
-
Manufactured by Babbitt International, Inc.based in USA
The FS10000 is designed to detect the flow of dust, granular or powered materials in a pneumatic conveying line or chute. This flow switch is espacecially suited to detect the flow of dust resulting from a ruptured filter bag in a bag house or dust ...
-
Manufactured by Babbitt International, Inc.based in USA
Emissions from dust collectors and bag houses has become a major environmental issue. Babbitt has two products which monitor these processes, and assist in reducing the level of dust emissions. The FS10000 Flow Switch is able to alarm and/or shut down a dust collector when a weak filter is detected BEFORE it ...
-
Manufactured by Seframbased in FRANCE
The CDM is a sensor which is based on the tribo-electricity principle. It can be used for dust rejection detection and ...
-
Manufactured by Aloatecbased in FRANCE
Automatic detection by picture processing and expert system: Detection of emissions by localized variation in color and luminance - Measurement of the duration of visible emissions. Alarms over Intranet: Help in real time for operators More responsive production teams. ISO 14000 Management: Environmental management and progress indicator. ...
-
Manufactured by Babbitt International, Inc.based in USA
The PM 1 and PM 1 PRO are single-point/basic functionality dust particulate monitors, employing charge induction sensing for reliable continuous monitoring of dust particulate in stacks, ducts and pipes. Applications include filter leak detection, cyclone overflow and powder flow/no ...
-
Manufactured by Dynoptic Systems Ltd - ACOEM Groupbased in UNITED KINGDOM
The DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaust gas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam ...
-
Manufactured by Dynoptic Systems Ltd - ACOEM Groupbased in UNITED KINGDOM
The DSL-240 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in the exhaust gas passing through a duct, stack or flue. The DSL-240 uses the innovative Dynamic Detection Principle (DDP) in which a light beam emitted from the Transmitter passes across the stack to the Receiver, which ...
-
Manufactured by Sintrol Oybased in FINLAND
The S305QAL stack emissions dust monitor meets the highest European standards as defined in EN14181. The S305QAL is approved for and is suitable for use on waste incineration and all combustion plant applications. The S305QAL1 comes with many key features making it a very reliable, low maintenance, sensitive and robust solution for ...
-
Manufactured by Grace Filter Manufacturing (U.K) Ltdbased in CHINA
FILTER MEDIA: Meta Aramid Needle Felt. WEIGHT: 400 Gsm, 500gsm, 550 Gsm. WORKING TEMPERATURE: < 204 Degree C. SIZE: D 150mm X L 4000mm. APPLICATION: Metal Smelting, Asphalt Mixing, Cement Plant. WORKING LIFE: 24-36 Months. HIGH LIGHT: dust collector replacement bags, dust collection filter ...
-
Manufactured by Sintrol Oybased in FINLAND
TÜV certified to meet the EN 14181 (2004) standard, the S305 dust monitor is used for official emissions applications. The state of the art dust monitor has been used in stack emissions for a number of state owned and private industrial applications around the ...
-
ShowcaseManufactured by Environmental Products & Applications, Inc.based in USA
With over 27 years in the industry, our certified experts know exactly how to eliminate dust on your site. Over the years, we have developed dust control polymers that work effectively & deliver clients maximum value on their investment. Envirotac dust control polymers reduce fugitive dust emission ...
-
Manufactured by Babbitt International, Inc.based in USA
The DP20T is a heavy duty, maintenance free low pressure transmitter designed for fabric filters, cyclones, powder processes and low pressure particulate laden pipes.The unique flush/ported design enables configuration for either differential or static movement. The ability to transmit accurate measurements below 10 W.C., over a broad temperature range without clogging, makes the DP20T the ideal ...
-
Manufactured by FGM Srlbased in ITALY
Pulsejet bag filter: high efficiency. A pulsejet bag filter is just one type of fabric filter. In fact, this type of dust filtration equipment can be divided starting from the type of cleaning used. Whatever the type of technique used to clean the sleeve, the principle is that a sufficient amount of energy must be released to detach the dust ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you