Dust Emissions Monitoring (Emissions Management) Equipment Available In American Samoa
-
PremiumManufactured by ENVEAbased in FRANCE
The Leak Locate 660 PLUS is a dust emission monitoring system incorporating a digital network and advanced graphics capability. It is designed for use in any processes where filter type arrestment plant are used, eg bag, ceramic and cartridge filters. The system comprises up to 32 networked sensors, a central control unit, user interface with ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The StackGuard continuously monitors the scatted light intensity of an extracted, withdrawn sample of gas. The laser light source minimized stray light and improves sensitivity to the µg/m³ level, the filtered purge air prevents from window soiling. A calibration check is performed by means of a checking rod. The sample air is led ...
-
Manufactured by Babbitt International, Inc.based in USA
The PM 1 and PM 1 PRO are single-point/basic functionality dust particulate monitors, employing charge induction sensing for reliable continuous monitoring of dust particulate in stacks, ducts and pipes. Applications include filter leak detection, cyclone overflow and powder flow/no ...
-
Manufactured by Monitor Technologies, LLCbased in USA
The DustTrend ES provides continuous trend measurements that allow plant operators to identify changes in dust emission levels and optimize the facility's filtration systems. ...
-
Manufactured by Sintrol Oybased in FINLAND
The S305QAL stack emissions dust monitor meets the highest European standards as defined in EN14181. The S305QAL is approved for and is suitable for use on waste incineration and all combustion plant applications. The S305QAL1 comes with many key features making it a very reliable, low maintenance, sensitive and robust solution for ...
-
Manufactured by Dynoptic Systems Ltd - ACOEM Groupbased in UNITED KINGDOM
The DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaust gas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam ...
-
Manufactured by Dynoptic Systems Ltd - ACOEM Groupbased in UNITED KINGDOM
The DSL-240 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in the exhaust gas passing through a duct, stack or flue. The DSL-240 uses the innovative Dynamic Detection Principle (DDP) in which a light beam emitted from the Transmitter passes across the stack to the Receiver, which ...
-
Manufactured by Seframbased in FRANCE
The SPT50 is a dust emission controller based on the principle of triboelectricity. It consists of two parts: A sensor directly installed on the duct to be monitored. The sensor probe is immersed in the particle-laden air stream. It assesses the dust emission rate in real time. A user connection box directly ...
-
Manufactured by Seframbased in FRANCE
The CDM is a sensor which is based on the tribo-electricity principle. It can be used for dust rejection detection and ...
-
Manufactured by Seframbased in FRANCE
The SPT150 is a dust emission controller based on the principle of triboelectricity. It consists of two parts: A sensor SPT50 directly installed on the duct to be monitored. The sensor probe is immersed in the particle-laden air stream. It assesses the dust emission rate in real time. A user connection box with ...
-
Manufactured by Sintrol Oybased in FINLAND
TÜV certified to meet the EN 14181 (2004) standard, the S305 dust monitor is used for official emissions applications. The state of the art dust monitor has been used in stack emissions for a number of state owned and private industrial applications around the ...
-
Manufactured by Babbitt International, Inc.based in USA
The FS10000 is designed to detect the flow of dust, granular or powered materials in a pneumatic conveying line or chute. This flow switch is espacecially suited to detect the flow of dust resulting from a ruptured filter bag in a bag house or dust ...
-
Manufactured by Babbitt International, Inc.based in USA
The DP20T is a heavy duty, maintenance free low pressure transmitter designed for fabric filters, cyclones, powder processes and low pressure particulate laden pipes.The unique flush/ported design enables configuration for either differential or static movement. The ability to transmit accurate measurements below 10 W.C., over a broad temperature range without clogging, makes the DP20T the ideal ...
-
Manufactured by Bhoomi Process Management Pvt. Ltd.based in INDIA
Agasthya 2013 Series Dual Pass Transmissometer Dust Monitor BI 7000 is an optical instrument designed to measure the concentration of dust or particulate matter suspended in exhaust gas passing through a duct or stack of industrial ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The EnergyTech 301 is a low cost dust monitor using well-proven tribo-electric technology providing accurate and rapid results. The EnergyTech 301 requires no critical alignment and has no optical surfaces to keep clean. The sensor is easy to install, requiring only a simple probe and is ideal for small duct sizes. Minimal maintenance is ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or stack. Its dual-pass optical arrangement is based on twin transmissometers measuring in opposing directions through the same section of the gas stream, ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The EnergyTech 101 Opacity Monitors consist of a visible light transmitter and receiver arrangement with digital data processing in a local display unit. The monitors can display data in either opacity, extinction or dust density in mg/m3 or normalised dust density in mg/Nm3. The EnergyTech 101 possesses four analogue inputs for ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME LEAK LOCATE 320 PLUS is a digitally networked, multi-compartment baghouse monitoring system providing remote observation of the condition of bag and cartridge filters. An ElectroDynamic™ sensor is installed in the outlet of each compartment to monitor dust emission levels. The network of sensors is connected to ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement applications. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter Pro allows the system to be fully integrated with all Dekati® Instruments and is also ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you