emissions standard Equipment in Netherlands

15 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Emissions Management ×

  • Keyword: emissions standard ×

  • In: Europe ×

  • In: Netherlands ×

HOFGAS - Model IFL2c - Standard Flare for Sewage or Biogas Plants

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

This biogas / WWTP gas flare with insulated combustion chamber and manually air combustion regulation is deployed when express regulations on gas emission must be observed. Controlled combustion of methane gas within high temperature flare.


HOFGAS - Model IFL4c - Customised Biogas Gas Flaring System

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

Customised HOFGAS-IFL4c biogas gas flaring system is deployed when express regulations on gas emission must be observed. Because of no visible flame, erection of the gas flare is most advantageous even near residential areas. The system is simple to operate and adjust, and starts reliably. The high temperature flare for biogas comes with the ...

BBA Pumps - Model BA-C500S11 D711 - Ultra High Flow Dewatering Pump

by BBA Pumps     based in Doetinchem, NETHERLANDS

Type: BA-C500S11 D711, Max. flow: 5500 m3/hour (24200 US GPM), Max. pressure: 37 mwc (122 ft.), Connections: Suction DN700 - Discharge DN500, Solids handling: 127 mm (5'), Priming system: BBA MP100, Engine: Volvo Penta TAD1374VE, Emission standard: Stage IV / Tier 4 Final, Canopy: EL23-58, Weight (net): 10.800 kg (23.760 lb.), Sound level: Approx. ...

BBA Pumps - Model BA-C200S8 D495 - High Head Water Transfer Pump

by BBA Pumps     based in Doetinchem, NETHERLANDS

Diesel driven, high head /high pressure pump. Type : BA-C200S8 D495. Max. flow : 1250 m3/hour (5500 US GPM). Max. pressure : 135 mwc (445 ft.). Connections : Discharge 8' ANSI - Suction 14' DIN. Solids handling : 62 mm (2,44'). Impeller type : Enclosed impeller. Priming system  : BBA MP100. Engine : Volvo Penta TAD1375VE. Emission standard : ...

Model SBT - Sliding Balancer Track

by Plymovent Group BV     based in Alkmaar, NETHERLANDS

The SBT system is the preferred system for back-in garage applications. The SBT system is designed to connect to any motor vehicle tail pipe, capturing virtually 100% of the exhaust emissions. This system is used in single, back-in garage applications where the vehicle tail pipe is within 12 meters of the door.

MaxSys - Model Series 963 - Emissions Dilute CVS / Bag Analysis System

by Signal Group Ltd     Distributor in NETHERLANDS

The MaxSys 900 Advanced Emissions Dilute CVS / Bag Analysis System offers all the facilities and sophistication of the Series 961, with innovative dilute gas measurement facilities. Measures the standard ULEV & SULEV legislative compounds CO, CO2, THC, CH4 and NOx.

Model HDW - P.T.O. Driven High Pressure Unit

by Innovation Development Technology BV (ID-Tec)     based in Poeldijk, NETHERLANDS

The HDW is a P.T.O. driven high pressure unit. Which can easily be built on as set under a van, such as a Mercedes Sprinter, VW Crafter or an Iveco daily. This means that the engine of the vehicle often with the latest european emission standards can be used. The speed of the vehicle is automatically adjusted to the set pressure and waterflow. The ...

Flaring Solutions for the Midstream Oil and Gas industry - Truck Loading Combustor

by ABUTEC LLC     Office in Boxtel, NETHERLANDS

The transportation of oil via truck is a cost-effective method for moving bulk cargo. However, as the regulations for truck transport become more stringent, it is imperative for companies to examine the need for enclosed combustion systems. Because trucks utilize tanks, the emissions produced during the loading process are regulated. ABUTEC ...

Sandvik - Steel Rollers

by Sandvik Mining     based in Amsterdam, NETHERLANDS

Sandvik steel rollers are highly versatile. Different sealing elements and bearings determine which type is suitable for different conditions. With this selection Sandvik steel rollers meet customer requirements even in the most extreme conditions. Loadability of one roller is very much dependable on bearing and shaft diameter. More specific ...

Flaring Solutions for the Midstream Oil and Gas industry - Marine Loading Terminal

by ABUTEC LLC     Office in Boxtel, NETHERLANDS

Barge and marine vessel loading facilities are key players in the midstream oil and gas pipelines. These facilities must have a system specifically designed to control and combust the vapors inherently produced in the oil cargo transfer process. Additionally, potential hazards related to the loading of barges and vessels are great, and include ...

Model TPG-series - Portable Generators

by Tsurumi Pumps     Distributor in NETHERLANDS

TPG-series generators are designed to withstand the severe conditions of construction jobsites or industrial applications, especially where extra durability and dependable, stable power are required. Ideal to supply the power to Tsurumi's single-phase submersible pumps and all your electrical power tools such as drills, saws, lighting and ...

Guidetti - Model Sincro 315 C - Electric Cable Recycling Machine

by Guidetti S.r.l.     Distributor in NETHERLANDS

Weight of the machine: 672 kg. Production: 80-100 kg/h (input material - with standard cable as per Guidetti sample). Total installed power: 7,5 kW. Feeding tension: 400 V - 50 Hz.

Model ACTEON 2051 - Suspended Solids And Temperature Measurement Field Transmitter (Self- Cleaning)

by Aqualabo Group     Distributor in NETHERLANDS

The ACTEON 2051 has been made to provide you accruate measurements and extended life time.

Model ACTEON 2053-TU SC-T - Self-Cleaning Turbidity And Temperature Field Transmitter

by PONSEL - Aqualabo Group     Distributor in NETHERLANDS

Study, watertight, easy to install, widescreen graphic display: instant measurements, trend line, calibration state, quick and simple intuitive programming, 4-20 mA outputs, programmable relays. Range : 0,0 to 200,0 NTU - 0 to 2000 NTU IR optical sensor. Self-Cleaning System SCN by a fast-action scraper (PONSEL Technology).

BioPure - Model HX2 - Double Pass Water Purification System

by Mar Cor Purification (MCP)     Distributor in Heerlen, NETHERLANDS

Mar Cor Purification offers the next generation central RO unit, the BioPure HX2. This direct feed double pass reverse osmosis system is designed specially to meet stringent international hemodialysis water requirements. The BioPure HX2 double pass system ensures the highest water quality, while the added feature of automatic hot water ...

Need help finding the right suppliers?

Let the XPRTs do the work for you