Emissions Standard (Emissions Management) Equipment Near Bahrain
-
Manufactured by Muntersbased in USA
CELdek evaporative cooling pads are designed to provide maximum cooling, low pressure drop and years of reliable service. It is made from specifically engineered cellulose paper that is chemically treated to resist deterioration and meets the UL Environmental GREENGUARD GOLD certifications emission standards, improving the indoor air ...
-
PremiumManufactured by ENVEAbased in FRANCE
Exists in single or dual stream version and “Ultra Low” version for low CO concentration measurements (0-10 to 0-50 ppm) Installed downstream a chiller, controlled at ...
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
in Reliability Management programs. It determines when oil needs to be serviced due to degradation of the oil chemistry or contamination by other fluids such as water or the wrong oil. It is compliant with ASTM D7889 “Standard Test Method for Field Determination of In-Service Fluid Properties Using IR ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
This portable IR spectrometer uses advanced data processing and a built-in oil application library to deliver immediate, actionable quantitative results for water, TAN and ...
-
Manufactured by PG Instruments Ltdbased in UNITED KINGDOM
The instrument is available with a flame atomiser and graphite furnace. Three flame options are available namely – Air/Acetylene, N2O/Acetylene and Air/LPG (Natural ...
-
Manufactured by Sennebogen Maschinenfabrik GmbHbased in GERMANY
Specifically developed to meet the needs of the recycling and waste management industries, the SENNEBOGEN 817 E is a compact, agile and efficient solution for sorting and loading tasks. In addition to its many sophisticated features, it functions impressively in halls with low ...
-
Manufactured by Jinluo Water Co., Ltd.based in UNITED ARAB EMIRATES
Due to the low sludge organic matter content in China, resulting in the promotion of anaerobic digestion technology limited; China's lack of sludge incineration exhaust emission standards, and the burning of the investment, energy dissipation, secondary pollution, making sludge thermal processing technique are favored; the fate of mud cake ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Refineries and gas processing plants commonly use amine chemistry to remove hydrogen sulfide from process gases to meet product specifications, emissions standards, or other process requirements. During normal operation, contaminants can enter and amine circuit with the process gas and can result from amine ...
-
Manufactured by Komptech GmbHbased in AUSTRIA
The Axtor is one of the most versatile machines anywhere for processing wood and green cuttings. With a 462 HP engine and a total weight under 19 tonnes in the trailer version, the new Axtor 4510 is a perfect fit for the requirements in the entry-level and medium-capacity categories. If more is needed, there is the powerful Axtor 6210 with 577 HP. With it, throughput of 300 cubic metres per hour ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The Hydraulic Power Pack LPP 90 is a high capacity multipurpose power pack for flexible operations of several oil spill clean up units simultaneously. The LPP 90 is contained within a steel frame designed to protect and ensure good air circulation. The power pack is equipped with four point lifting rings and forklift channels for easy handling on land or offshore. It is equipped with an electric ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The Hydraulic Power Pack LPP 200 is a high capacity multipurpose power pack for flexible operations of several oil spill clean up units simultaneously. The LPP 200 is contained within a steel frame designed to protect and ensure good air circulation. The power pack is equipped with four point lifting rings and forklift channels for easy handling on land or offshore. It is equipped with an ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The Hydraulic Power Pack LPP 119 is a high capacity multipurpose power pack for flexible operations of several oil spill clean up units simultaneously. The LPP 119 is contained within a steel frame designed to protect and ensure good air circulation. The power pack is equipped with four point lifting rings and forklift channels for easy handling on land or offshore. It is equipped with an ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The Hydraulic Power Pack LPP 150 is a high capacity multipurpose power pack for flexible operations of several oil spill clean up units simultaneously. The LPP 150 is contained within a steel frame designed to protect and ensure good air circulation. The power pack is equipped with four-point lifting rings and forklift channels for easy handling on land or offshore. It is equipped with an ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser. As completely hot and wet emissions measurement, atmosFIR CEM is ideal for complete measurement of multiple gases from applications such as incineration and power. A standard gas suite of NO, NO2, N2O, SO2, NH3, HCl, CH4, O2, CO2 and ...
-
Manufactured by CR Clean Air Group, LLCbased in USA
CR Clean Air Group offers you the choice of purchasing the custom-engineered equipment units only, or an entire integrated system ready to go, essentially ...
-
Manufactured by CR Clean Air Group, LLCbased in USA
The High Energy Venturi Scrubber is ideally suited to the capture of small particles less than 3 microns in size. It is effective as well in the submicron range and requires little or no maintenance. For applications where variations in gas flow require throat gas velocity compensation to maintain specified scrubbing efficiencies, the Clean Air Group, LLC offers automatic and manually variable ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
, or spectrographic analysis systems. Manufactured and tested to meet rigid quality control standards. Excellent general-purpose calibration. High accuracy and high ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Mikron M315X-HT series of blackbody calibration sources comprise of a controller module and a separate enclosure for the emitter source with available aperture sizes from 4 x 4 in up to 12 x 12 in and temperature ranges from 30 to 600°C. High effective emissivity 1.0 at 8 to 14 µm. Range of aperture sizes (4 x ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you