Industrial Emissions (Emissions Management) Equipment Available In Botswana
-
PremiumManufactured by Testo, Inc.based in USA
The flue gas analyzer testo 350 MARITIME can be used for emission measurement on marine diesel engines for measuring the gaseous exhaust gas concentrations of NO, NO2, SO2, CO, CO2-(IR), O2. In order to meet the harsh requirements at sea, the complete flue gas analyzer, including accessories, is housed in a robust protective case with a ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 340 is the ideal tool to confirm proper set-up and to identify emission problems before they get serious. Oxygen is the base sensor in all Testo 340 Analyzers. Simply add one, or up to three sensors for your specific job. This combustion analyzer can be configured in many ways for commissioning commercial boilers, testing ...
-
PremiumManufactured by Testo, Inc.based in USA
The rugged testo 350 portable gas analyzer is ideal for a wide range of professional industrial emission measurements and analysis applications, and is excellently suited for complex data compilation using TECsoft emission compliance ...
-
PremiumManufactured by ENVEAbased in FRANCE
Standard Reference CLD method for low & ultra low NOx measurement, IR-GFC for CO, CO2, SO2, N2O, Nox, HF, HCl, TOC and O2 in a single analyzer. Fast and simultaneous measurements of up to 10 gases, available in 2 versions: NOx (CLD) and O2 (Paramagnetic) in 19’’ Rack or Tight box for low and ultra-low NOx monitoring. CO, CO2, SO2, HCl, HF, TOC, N2O (IR) + NOx (CLD) + O2 ...
-
PremiumManufactured by ENVEAbased in FRANCE
One single analyzer for the measurement of up to 50 parameters, to be selected according to the application. MCERTs certified. Based on the FTIR technology (Fourier Transform Infrared) for simultaneous measurement of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CH4, TOC, H2O, CO2, ...
-
PremiumManufactured by Testo, Inc.based in USA
Does a sizeable part of the work you do have something to do with refrigerant systems or heat pumps? Then here’s one tool you can’t afford to be without: the testo 550-2 digital manifold ...
-
PremiumManufactured by ENVEAbased in FRANCE
paramagnetic sensor. The analyzer has been designed to meet the specific needs of on-site regulatory measurement providing superior mobility, robustness, accuracy and compliance. All this makes up for a unique gas emission monitor offering high productivity and low operational cost. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and O2 in process applications or for stack emission compliance. Multi-Gas NDIR-GFC analyzer (Non-Dispersive Infrared Gas Filter Correlation) measuring up to ten gases simultaneously, including Nitrogen ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MIR 9000H is a multi-gas analyzer using the Gas Filters Correlation technology (GFC). With its hot measurement principle (180 °C on a hot and humid sample), the MIR 9000H is the perfect tool for the analysis of the main gas parameters in many applications, including DeNOx (SCR / SNCR) and the optimization of flue gas treatment ...
-
Manufactured by TCR-Tecorabased in ITALY
We gave a new “BRAIN” to the PLUS sampler of the BRAVO line, automating some control and data storage functions. BRAVO X has the same mechanical features as the PLUS version, but the flow is electronically controlled instantaneously, as well as display / memorize the sampled volume. This means the possibility of not supervising after entering initial settings!. Built-in microprocessor ...
-
Manufactured by TCR-Tecorabased in ITALY
Kit to use the 47mm inox steel or titanium filterholder in the heated box. Using this kit, composed by two adapters, it’ possible to use the filterholder for 47mm flat membranes (see Emission Line 1.104.01) placing it in the heated box of the probe for micropollutants. The front connector fit to the outlet of the probe while the ...
-
Manufactured by TCR-Tecorabased in ITALY
Completely built in stainless steel Aisi 316. Compliance with ISO 10780. Terminal type “S” (not included) interchangeable with metal to metal joint. Thermocouple type K ...
-
Manufactured by TCR-Tecorabased in ITALY
Some EN methods for the sampling of compounds in the gas phase involve the use of bubblers, on a derived stream, positioned downstream of the probe. The used configuration involves a heated sampling probe with external filter according to EN 13284 and EN 14385. The special designs of our probes allow to separate the different elements for easier management, and thus providing the ability to ...
-
Manufactured by TCR-Tecorabased in ITALY
The dividable monotube probes can be used in that application where it is not possible or not convenient to use an integrated probe. They are developed in conformity with the “Determination of dust concentrations” according to UNI EN 13284-1. It is also compatible with all TCR Tecora filter holder device.The connection and the extension tubes are the ...
-
Manufactured by TCR-Tecorabased in ITALY
Dividable isokinetic probes are the answer to the common problems of shipping, handling in reduced space area and storing of uncomfortably long probes. With a light weight and a high strong section, this probe allows an overhang up to 5 meter with reduced deflections. The testing head consists of a suction tube, an "S" Pitot tube, a gas analysis tip and a temperature measure probe. Through a ...
-
Manufactured by TCR-Tecorabased in ITALY
Our isokinetic probes are realized to make the sampling easier by placing the probe more precisely in the stack emission flow during isokinetic ...
-
Manufactured by TCR-Tecorabased in ITALY
Condensing and adsorbing device MCS2 for the determination of PCDD/PCDF in compliance to EN 1948 Method. The EN 1948-1 “Filter condenser” method foresee the isokinetic sampling with a heated probe, filterholder and adsorbing trap XAD2/PUF after the ...
-
Manufactured by TCR-Tecorabased in ITALY
Inox Filterholder: It is possible to use the filterholders described in Product Data 1.104.02 "Isokinetic Filter ...
-
Manufactured by TCR-Tecorabased in ITALY
Condensing and Adsorbing Device EPAMCS2 for the Determination of PCDD/PCDF in Compliance to EPA 23 and EN 1948 Method. The EPA 23 and EN 1948-1 methods foresee the isokinetic sampling line with a heated probe, filterholder and XAD2 adsorbing trap for both gas and ...
-
Manufactured by TCR-Tecorabased in ITALY
into duct (fig. 1 and 2). The impactor is designed for a high sampling flowrate, about 2 m3/h, depending on emission characteristics, to reduce sampling time. The device is supplied with a dedicated software, which allows to calculate sampling flowrate, nozzle and others factors to optimize the quality of the measurement. The Titanium impactor ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you