Emissions Management Equipment in Finland

  • BioGas - Value from Organic Waste

    Biogas technology offers a means for efficient conversion of organic wastes into energy, valuable biofuels and high quality fertilizers. Biogas can be used for energy production in similar way as natural gas: for heat, electricity, vehicle fuel and kitchen gas. Biogas is a very clean fuel with zero greenhouse gas emissions and up to 99 % lower ...

    By BioGTS Ltd. based in Jyväskylä, FINLAND.

  • Premium

    Model VCEM5100 - Flue Gas Flow Monitor

    The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

    By Codel International Ltd Distributor in FINLAND. from Flow Monitors for Stack Emissions Product line

  • Premium

    Model VCEM5000 - Gas Velocity Monitor

    The VCEM 5000/51000 represents the latest generation of CODEL’s unique flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

    By Codel International Ltd Distributor in FINLAND. from Flow Monitors for Stack Emissions Product line

  • Marine SOx Scrubbers

    Marine SOx scrubbers have been developed to abate the sulphur emissions from shipping. Nordkalk's desulphurisation concept is based on a dry scrubber where granules made from Nordkalk slaked lime (calcium hydroxide) absorb sulphur from the flue gas of the ship. The benefit of the dry scrubber is the absence of emissions to both air and sea, as the ...

    By Nordkalk Corporation based in Pargas, FINLAND. from Energy Product line

  • Proventia - Model NOxPAC™ - Emission Control System

    Proventia NOxPAC™ – A Technology Platform for Future Emission Standards. Extremely low emission standards are coming into force in the near future. The required near-zero levels of NOx and PM cannot be reached without state-of-the-art exhaust aftertreatment systems. Proventia NOxPAC™ can be used as a technology platform for ...

    By Proventia based in Oulunsalo, FINLAND. from Integrated EAT Systems Product line

  • Premium

    J.U.M. - Model W600 - Wall Mount All Heated Total Hydrocarbon Analyzer

    The J.U.M W600 Heated Total Hydrocarbon Analyzer is a very compact wall or panel mount heated FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion ...

    By J.U.M. Engineering GmbH Distributor in FINLAND. from Heated FID Analyzers - Standard FIDs Product line

  • Premium

    J.U.M. - Model 109L - High Temperature Total Hydrocarbon/Non-Methane Hydrocarbon Analyzer

    The J.U.M. Engineering HFID Model 109L is a competitively priced, compact table top or 19' rack mount, heated Non Methane Hydrocarbon analyzer for the measurement in ambient air, air emissions and other gases.

    By J.U.M. Engineering GmbH Distributor in FINLAND. from Heated FID Analyzers - Standard FIDs Product line

  • Premium

    NEO Monitors LaserGas - Model Q SO2 - Mid-Infrared Sensors

    NEO Monitors LaserGas Q SO2 is using Tuneable Laser AbsorptionSpectroscopy (TLAS) i.e a non-contact optical measurement method employing solid-state laser sources. The sensor remains unaffected by contaminants corrosives and does not require regular maintenance. The absence of extractive conditioning systems further improves availability of the ...

    By NEO Monitors AS Distributor in FINLAND.

  • Biogas Technology

    Biogas is generated by the fermentation of organic matter under oxygen-free conditions. Biogas consists chiefly of methane (55–65%) and carbon dioxide (35–45%) plus small amounts of other substances. Biogas production reduces atmospheric emissions, due to the fact that the process captures the methane generated from biomass decomposition. Methane ...

    By Biower Oy based in Helsinki, FINLAND.

  • Premium

    NEO Monitors LaserGas - Model Q SO2 (QCL Edition) - Gas Detector Sensor

    NEO Monitors LaserGas Q SO2 (QCL edition) is using Tuneable Laser Absorption Spectroscopy (TLAS) i.e a non-contact optical measurement method employing solid-state laser sources. The sensor remains unaffected by contaminants corrosives and does not require regular maintenance. The absence of extractive conditioning systems further improves ...

    By NEO Monitors AS Distributor in FINLAND.

  • DynOptic - Model DSL-340 MkIII - Double Pass Dust Monitor For Monitoring Dust Emissions Using DDP

    The DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaust gas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver/Reflector ...

    By DynOptic Systems Ltd Distributor in FINLAND. from Our Dust Monitor Range Product line

  • DynOptic - Model DSL-240 MkIII - Single Pass Dust Monitor For Monitoring Dust Emissions using DDP

    The DSL-240 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in the exhaust gas passing through a duct, stack or flue. The DSL-240 uses the innovative Dynamic Detection Principle (DDP) in which a light beam emitted from the Transmitter passes across the stack to the Receiver, which measures ...

    By DynOptic Systems Ltd Distributor in FINLAND. from Our Dust Monitor Range Product line

  • REMU - Model Combi E8 - Screening Plant

    The frame of a new Combi E8 is lighter and stronger. The hopper of the feeder is a little longer and wider. Discharge height of the fine conveyor is now 3 m. Maintenance is improved with more inspection doors and easier access to greasing points. This new screening plant is also more environmentally friendly. The Caterpillar C3.4B engine is using ...

    By REMU Ltd based in ÄHTÄRI, FINLAND. from Combi Screening Plant Product line

  • Model PFM 13 C - Filter Controller

    For monitoring dust emissions and detecting effectively damages at filtering precipitators. The device is simple in construction. It is based on the triboelectric measuring principle and allows a timely monitoring of dust emissions.

    By Dr. Födisch Umweltmesstechnik AG Distributor in FINLAND. from Filter Controller Product line

  • Model PFM 02 - Filter Controller

    The device is simple in construction and very user-friendly. The integrated micro-controller allows numerous possibilities to use the PFM 02 as well as a timely monitoring of the dust emissions. Target value calibration: Enter a known, averaged dust content in operation state - The PFM 02 determines automatically appropriate calibration factors ...

    By Dr. Födisch Umweltmesstechnik AG Distributor in FINLAND. from Dust Measurement Devices Product line

  • Model PFM 13 - Filter Controller

    For monitoring dust emissions and detecting effectively damages at filtering precipitators. The device is simple in construction. It is based on the triboelectric measuring principle and allows a timely monitoring of dust emissions.

    By Dr. Födisch Umweltmesstechnik AG Distributor in FINLAND. from Filter Controller Product line

  • Premium

    Protea - Heated Sample Lines

    Protea supplies heated sample lines of lengths 1m to 50m for the sampling of gaseous samples where sample temperature control is imperative. With dedicated integrated calibration lines and robust end fittings, these lines are suitable for fixed or mobile applications. Protea also supplies ATEX approved heating elements for our heated lines, ...

    By Protea Limited Distributor in Helsinki, FINLAND. from System Solutions - Sampling System Parts Product line

  • Premium

    Model QAL2 EN 14181 - Quality Assurance Standard

    BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making measurements with a ...

    By Protea Limited Distributor in Helsinki, FINLAND. from Product line

  • Model DGTk2, DGTk2-ex - Digital Gas Detectors

    Quality assured manufacturing, VTT (Technical Research Centre of Finland) ISO 9001.Detects a big variety of combustible chemical compounds.Industrial standard output signal.Easy mounting due to the isolating/mounting plate.Stylish and robust enclosure, impact resistant cast-aluminium.Non-intrusive calibration.DGTk2r and DGTk2r-ex types functions ...

    By DETECTOR OY based in Turku, FINLAND. from Gas Detector Product line

  • Premium

    J.U.M. - Model TJ 100 - Heated Sample Line

    The model TJ 100 is a Heated Sample Line especially designed for Emissions Applications where hydrocarbons are to be measured. To prevent the forming of hydrocarbon memory effects, (hang up), the end caps are heat resistant to up to 200°C. This allows the sample line to be coupled inside an oven of a heated sample filter and heated FID ...

    By J.U.M. Engineering GmbH Distributor in FINLAND. from Heated FID Analyzers - Sampling Accessories Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you