Emissions Management Equipment For Air And Climate In Colorado
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's M316 series is available only in the U.S. The blackbodies are two-piece, portable units ideal for field calibration or verification of infrared temperature sensors. Temperature range: Ambient +5 to 300°C (+9 to 572°F). Manufactured and tested to meet rigid quality control standards. Excellent general purpose ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Mikron M345X series blackbody calibration sources are comprised of a controller module and a separate enclosure for the emitter source. Temperature ranges from 0 to 170°C. High effective emissivity 1.0 at 8 to 14 µm. Aperture size range from 4 x 4 in to 12 x 12 in. High accuracy and high resolution (0.01°C). Excellent stability 0.05°C per eight hours in a ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's Mikron PhotriX pyrometers offer ultra-accurate, precise infrared temperature measurement with unmatched low-temperature capability. Unmatched signal-to-noise ratio. Accuracy: ±1.5°C or 0.15% of reading. Short wavelength, narrow bandwidth detectors. Ambient temperature compensation to combat drift. Unmatched, longterm stability and reproducibility. Robust and flexible ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Portable, Two-Piece Low Temperature Blackbody Calibration Source with a Large Surface Area, Ambient +5 to 450°C. Advanced Energy's Mikron Calibration Source M315-HT series are infrared radiators used for calibrating and verifying the output signals of pyrometers, thermal imaging systems, heat flux measurement systems, or spectrographic analysis systems. Temperature range: Ambient +5 to ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Stationary, digital ratio pyrometer with built-in video camera system and infrared filter. Temperature measurement between 700 and 1800°C (1292 to 3272°F). The Impac® ISR 6-TI Advanced infrared thermometer combines accurate (2-color) pyrometry and thermal imaging in one non-contact temperature measurement system. It accurately measures the temperature of the center spot and uses an ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s M390 ultra-fast high temperature blackbody calibrator can produce very high temperatures and meet high emissivity targets. It can quickly stabilize within a few minutes. Exceptional accuracy at high temperatures. ±0.25% of reading ±1°C. Effective emissivity of 1.0 between 0.65 to 1.8 µm. Rapid warm-up/cool-down time - only five minutes from ambient ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Sekidenko OR4000E delivers precision temperature measurement, using active-emissivity compensation for accurate measurement and control under changing-emissivity conditions. Configurable wavelength based on material type and required temperature range. Multi-channel measurement capabilities using remote lensed optical sensors or sapphire light pipes for in-situ measurement. Both analog and ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's Mikron M315X series are two-piece blackbody calibration sources with a large surface area. Temperature range: Ambient +5 to 400°C (+9 to 752°F). Manufactured and tested to meet rigid quality control standards. High emissivity and ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Portable, Compact Low Temperature Blackbody Calibration Source with a Large Surface Area, Ambient +5 to 450°C. Advanced Energy's Mikron M310-HT calibration sources are infrared radiators used for calibrating and verifying output signals of infrared thermometers (pyrometers), thermal imaging systems, heat flux management systems, or spectrographic analysis systems. Manufactured and tested to ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Mikron M305 blackbody calibration source combines portability with a wide temperature range, high emissivity, and high accuracy. Easily moved when needed — weighs only 25 kg (55 lb). High accuracy ±0.2% of reading ±1°C. High emissivity. Manufactured and tested to meet rigid quality control ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Mikron M330 blackbody calibration source utilizes a digital indicating temperature controller you can set to any temperature between 300 to 1700°C. High effective emissivity 1.0 at 0.65 to 1.8 µm. High accuracy. Excellent stability ±1°C per 8-hour period. Fast slew rate (limited to 20°C per ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Mikron M390S ultra-high temperature blackbody calibrator easily achieves high emissivity targets and stabilizes at your required temperature within a few minutes of turn-on. Exceptional accuracy at high temperatures. ± 0.25% of reading ± 1°C. High effective emissivity of 1.0 between 0.65 to 1.8 µm. Rapid warm-up/cool-down time — only five ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Mikron M315X-HT series of blackbody calibration sources comprise of a controller module and a separate enclosure for the emitter source with available aperture sizes from 4 x 4 in up to 12 x 12 in and temperature ranges from 30 to 600°C. High effective emissivity 1.0 at 8 to 14 µm. Range of aperture sizes (4 x 4 in to 12 x 12 in). High accuracy and high ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
The ENVEA MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in SRM paramagnetic sensor. The analyzer has been designed ...
-
PremiumManufactured by ENVEAbased in FRANCE
Suitable for industrial processes controlled with dry scrubbing and high efficiency bag filtration. The PCME QAL 991 uses unique ElectroDynamic™ Probe Electrification technology, which outperforms alternative probe electrification technologies by extracting a specific frequency band of the induced AC signal. This patented feature ensures confidence in accurate and representative data by ...
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MIR 9000H is a multi-gas analyzer using the Gas Filters Correlation technology (GFC). With its hot measurement principle (180 °C on a hot and humid sample), the MIR 9000H is the perfect tool for the analysis of the main gas parameters in many applications, including DeNOx (SCR / SNCR) and the optimization of flue gas treatment ...
-
Manufactured by Advanced Emissions Solutions, Inc. (ADES)based in USA
ADA® RESPond® Flue Gas Conditioning (FGC) is a highly effective surface ash resistivity modifier for power plants operating cold-side ESPs requiring FGC. Replacing SO3 FGC with RESPond® FGC Technology not only supports opacity and particulate emissions compliance, it also reduces the costs of mercury control as well as the risks of mercury ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you