Emissions Monitoring Applications available in North Korea
-
Premium
Continuous emissions monitoring solutions for waste to energy plants
Process control and emission monitoring in a waste to energy plant is a challenge. A large number of gaseous components need to be measured with high accuracy. Almost 100% uptime is required and the monitoring system needs to be easy to maintain and fast to calibrate. The OPSIS system is tested and approved to have the best performance and longest calibration intervals, and provides the waste to energy plant with an accurate analyser that will operate with a minimum of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring for glass manufacturing industries
Process control and emissions monitoring in a glass manufacturing plant is a challenge due to high temperature in the flue gas. The OPSIS DOAS system provides the glass industry with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method that uses an optical path to measure across the duct. A single OPSIS system will measure all relevant gas componensts such as NOX, SO2, CO, CO2, H2O, O2, and ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring for brick plants
Process control and emissions monitoring in a brick plant is a challenge due to the high concentrations of HF. The HF is generated in the process and gas phase HF can reach 50 mg/m3 or more. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions Monitoring
The Opsis monitoring solution in aluminium smelters is based on either DOAS or laser diode technique. The on-line, open-path systems are used for monitoring HF and sulphur dioxide in potrooms, in fence-line applications and in continuous emissions monitoring. Opsis has long experience of monitoring in aluminium ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring for cement industry
Process control and emissions monitoring in cement plants, can be a challenge due to the dusty and corrosive environment. OPSIS provides an accurate system that will operate with high performance and a minimum of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring solutions for palm oil plants
Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Air pollution control for the composite & carbon fiber industry
Ensure Worker Safety and Reduce Production Costs. Anguil’s engineering expertise and reliable environmental solutions can reduce the cost of manufacturing and keep pollutants from reaching workers or the community. ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Continuous emissions monitoring solutions for steel plants
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions Monitoring for Airports
Opsis systems provide high-performance monitoring of the emission activities within an airport. The rapid system allows on-line monitoring of the emissions from each aircraft at take-offs and landings, monitoring of fugitive emissions from stationary sources and differing of the airport sources from the surrounding pollution ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas monitoring and dust monitoring
EM-5 series Continuous Emission Monitoring System (CEMS) Counting tail gas emission and realtime concentration NOX SO2 O2 Temperature pressure flow dust ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Solutions for fence-line and perimeter ambient air monitoring
Cerex Multi-Gas Open Path Analyzers are available in both FTIR and UVDOAS technologies to meet specific requirements for perimeter ambient air quality monitoring, leak detection, fugitive emissions monitoring and ambient air quality monitoring. Cerex multi-gas analyzers offer significant advantages over single gas analyzer arrays, electro-chemical sensor arrays and time integrated air sampling ...
By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).
-
Premium
Continuous emissions monitoring solutions for fertilizer industry
Process control and emissions monitoring in a fertilizer plant is a challenge due to the high concentrations of HF. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions Monitoring for Chemical Plants
The Opsis gas monitoring system is designed for monitoring in stacks and gas ducts in chemical industries, both in order to increase plant efficiency and to monitor emissions. The Opsis systems have been internationally approved by e.g. the German TÜV and the U.S. ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring solutions for chemical industry
Process control and emissions monitoring in a chemical plant is a challenge due to corrosive gases, high dust load, and high temperatures. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Marine monitoring solutions
Marine monitoring is a variant of OPSIS general offers for continuous emissions monitoring (CEM) and process control. The special operating conditions on-board vessels call for special measures to comply with regulations and expectations. However, OPSIS has mastered this environment and has for many years successfully delivered systems for marine ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring solutions for power plants
OPSIS offers fully automated system solutions for continuous monitoring in power plants. The monitoring systems have been tested and approved by the German TÜV and the U.S. EPA among others, for the best performance and longest calibration ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Fence-Line Monitoring of Fugitive Emissions
The Opsis open path monitoring system is an excellent tool for monitoring air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions monitoring for waste incineration
Process control and emission monitoring in a waste to energy plant is a challenge. A large number of gaseous components need to be measured with high accuracy. Almost 100% uptime is required and the monitoring system needs to be easy to maintain and fast to ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions Monitoring for Mining / Emissions Monitoring for Smelting
The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring solutions for special applications CEM
OPSIS is a world-leading supplier of CEMS (continuous emissions monitoring systems) for various special applications in the industrial emissions sector. The OPSIS gas monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and longest calibration intervals. We specialise in the design and supply of high accuracy, low maintenance, cross-duct, non-extractive CEM systems. We also provide additional products and services, including dust and ...
By OPSIS AB based in Furulund, SWEDEN.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you