continuous emissions monitoring Equipment available in Nunavut
153 Results found
Current filtering criteria
You can remove a filter by clicking on the x
Category: Air & Climate
Subcategory: Emissions Monitoring
Keyword: continuous emissions monitoring
Available in: Canada
Available in: Nunavut
Gasmet Technologies Oy
based in Helsinki, FINLAND
Gasmet CEMS is a modular construction that typically comprises of Gasmet CX4000 FTIR gas analyzer, heated sampling unit, industrial PC and a Zirconia oxygen analyzer which are installed in an air-conditioned cabin. All modules are 19' rack mounted in pull-out shelves for easy accessibility & service. Gasmet CX4000 FTIR gas analyzer allows the ...
Tekran Instruments Corporation
based in Knoxville, TENNESSEE (USA)
The EPA Electric Generating Unit Mercury and Air Toxics (EGU MATS) and Portland Cement Maximum Achievable Control Technology (PC MACT) regulations require reductions in gaseous mercury emissions. Tekran has proven technology to support mercury compliance monitoring, abatement system optimization, and performance audit testing instrumentation.
based in Poissy, FRANCE
Continuous stack emission monitoring gas analyzer available in 2 versions for the simultaneous and continuous measurement of: NH3 and H2O, CO, CO2, NO, NO2, SO2, HCl, HF, O2 in addition of the NH3 and the H2O. Designed to measure wet and corrosive sample. TÜV certified as compliant to the European standard EN15
based in Indianapolis, INDIANA (USA)
Extraction CEMS are the most commonly used CEMS today. They are accurate and reliable to very low pollutant levels (single digit ppm). Today's Extraction CEMS are built to run 24/7, 365 days a year. Given the right stack conditions, they are easy to operate and maintain.
based in Indianapolis, INDIANA (USA)
A Dilution CEMS offers the lowest maintenance of any CEMS by it's elimination of sample conditioners and pumps. Compressed air is used to 'power' the Dilution CEMS. It is sent up the stack where it is mixed with the stack gas at a 100:1 ratio (typ.). The sample is then pushed down to the analyzers. Besides the stack gas being diluted, the moisture ...
based in Ry, DENMARK
Instrumatic is a world leader in design and manufacture of exhaust gas dilution probe systems. In compliance with Environmental Protection Administrations and tested by International Association of Instruments Users SIREP-WIB-EXERA 1993.No matter how good or precise the analyzer/sensor are the result never better than the sample provided to the ...
Lowe Engineering Limited
based in Leeds, UNITED KINGDOM
Are you planning to install Emissions Monitoring or do you have a requirement for Gas Analysis? Lowe Engineering's great experience in systems for these two fields could save you money and give you peace of mind.
PACE Environmental Products, Inc.
based in Whitehall, PENNSYLVANIA (USA)
As a manufacturer, integrator, and tester PACE Environmental Products Inc. is your single best resource for turnkey CEMS Systems. Each CEMS is designed to conform to current EPA standards and is built to suit the monitoring requirements you need. Housed within a single cabinet, all systems are built with the highest quality and designed for easy ...
based in St Ives, UNITED KINGDOM
The PCME STACK 980 is an approved Particulate Continuous Emission Monitor suited to industrial applications in stacks after bag filters, cartridge filters, cyclones and process driers. The instrument combines the latest regulatory approvals (MCERTS Performance Standards for Automated Dust Arrestment-Plant Monitors, version 1 (August 2010), class 2 ...
Custom Instrumentation Services Corporation - CiSCO
based in Englewood, COLORADO (USA)
Long ago, CiSCO established both Environmental and a Software Departments to ensure that our client’s permit and reporting requirements are met. Since it’s inception in 1985 CiSCO has built over seven hundred and fifty CEMS systems. We have provided outstanding service and guaranteed certification with a certification success rate of ...
Ecotech Pty Ltd
based in Knoxfield, AUSTRALIA
We offer a complete solution for continuous emission monitoring, utilising the extractive dilution monitoring method. With over 30 years of experience in the design, construction, installation, commissioning and maintenance of Continuous Emission Monitoring Systems (CEMS), you can rely on us for your CEMS needs.
Advanced Control Systems, Inc.
based in Bellingham, WASHINGTON (USA)
ACS designs and builds custom continuous emission monitoring systems to fit your needs. These systems are configured to comply with 40CFR Part 60 and Part 75. Systems can include monitoring for 02, C02, NOx, CO, S02, Total Hydrocarbons, Air Toxics, Flow, and Opacity. We can also provide you with custom data acquisition and control packages or ...
Beijing Care Corporation Ltd.
based in Beijing, CHINA
BKS-3000 Continuous Emission Monitoring Systems (CEMS) is a packaged system in which a sample of gas is continuously drawn from the process point, which is applied for monitoring various industrial sources of air pollutants. Gas concentrations such as SO2, NOx, O2 are on-line continuously detected, the temperature, pressure and flow rate of the ...
CIC Photonics, Inc.
based in Albuquerque, NEW MEXICO (USA)
CIC Photonics. Inc. is dedicated to providing today's growing industries with the highest sensitivity and fastest time response instrumentation. Our analyzers are used worldwide in a variety of different arenas, and although CIC Photonics has a set of core systems, we pride ourselves on truly meeting the needs of our customers by adapting the core ...
Nexus Solutions Inc.
based in London, ONTARIO (CANADA)
The CEMView-mTPC computer for Continuous Emission Monitoring (CEM) applications strikes a balance between economy and reliability.The highly integrated motherboard delivers high reliability with excellent performance. The video, LAN and RAID controllers are all integrated onto the motherboard, effectively reducing or eliminating the number ...
based in St Laurent, QUEBEC (CANADA)
Continuous emission monitoring systems are used as a means to ensure that stack emissions are in compliance with applicable air emission standards and regulations.
Detection Instruments Corporation
based in Phoenix, ARIZONA (USA)
The Sycamore CEM (Continuous Emissions Monitor) is a flexible Hydrogen Sulfide Gas Monitoring System with full sampling capability. The CEM is a sophisticated system is configurable as a single, dual or three-point monitoring system and can be used to monitor the inlet, intermediate stage and outlet of odor control systems. By using advanced ...
HANGZHOU ZETIAN TECHNOLOGY CO., LTD
based in Hangzhou, CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for a particular occasion. After ...
Related Terms for continuous emissions monitoring
Need help finding the right suppliers?
Let the XPRTs do the work for you