Measurement In Stack (Emissions Monitoring) Equipment Available In Netherlands Antilles
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Nitrous oxide (N2O) is a man-made green house and ozone depletion gas. Emissions from agriculture are the main source, followed by industry and energy plants. Although the concentration of N2O in the atmosphere is relatively high (330 ppbv), the day and night fluctuations are small and so are seasonal differences. Therefore, highly sensitive and stable instrumentation is needed to monitor N2O ...
-
PremiumManufactured by ENVEAbased in FRANCE
Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks after bag filters, cartridge filters, cyclones and process driers. Advanced Probe Electrification Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks where regulatory approvals are not ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-200 dust monitor is a self-developed probe-in monitor, based on years of research on dust detection technology. Different from traditional back scattering dust monitor (such as DMS-100/MS-1000), DMS-200 installs a dust measurement module at the top of the probe, which directly stretches into the stack for dust measurement in close ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000 has a range of 0-40m/sec and is the only flow sensor that gives a true non-contracting cross-stack flow measurement of the process. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000F was designed specifically for Flares stack sand reports flow velocities from 0.03 - 170 m/sec with a ± 2% accuracy. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
Cooper Environmental’s Xact® 640 is the first Multi-Metals Continuous Emissions Monitor to be proven successful for accurately measuring elemental concentrations in smoke stacks by capturing and measuring both particulate and vapor phase metals. The Xact® 640 system uses reel-to-reel filter tape sampling and nondestructive ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000P Particulate and Flow sensors report Air Flow and a general Particulate loading and percent opacity in virtually any operating condition. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000W model is equipped with Automatic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter or moisture carried in the flow. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates a true average flow reading. The OFS ...
-
Manufactured by TCR-Tecorabased in ITALY
Flowtest ST is the TCR Tecora Digital Stack Gas Velocity and Flow Meter. The Precision Measuring – Data Logger model Flowtest ST is dedicated to gas velocity, volumetric flow rate determination, and isokinetic measurements in stack. The instrument is housed in a compact and lightweight case; easy to set up and operate. It ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 909 is a single gas continuous emissions monitoring (CEM) system that measures stack effluent temperature and velocity alongside pollutant concentrations at stack conditions. This enables mass emission rates to be reported. With no moving parts, the 909 offers high reliability and reduced maintenance requirements. It provides sample and ...
-
Manufactured by Teledyne Monitor Labs, Inc.based in USA
cell at the stack temperature and pressure. A local user display on the transceiver serves as a simple yet powerful man-machine interface for accessing parameters, measured values and initiating calibration ...
-
by Everimpactbased in FRANCE
Measure and report your ships’ actual onboard emissions, in real-time . Our IoT sensors installed in the exhaust stacks measure actual GHG (CO2, CH4, CO, NO, NO2 and SO2), live data is available on a ...
-
Manufactured by Dado Lab SRLbased in ITALY
The ST5 Evo is evolved version of the ST5 isokinetic sampler, developed to be even more efficient, easy to use, practical, cost/time-saving. The perfect companion for stack testers. The instrument is composed by two units, the Control Unit and the Pump Unit. The Evo version is designed to allow the user to take up on the sampling point ...
-
based in GERMANY
The GRIMM 7917 Emission Sampling System (ESS) is designed to sample aerosol particles directly from hot exhaust gas, e.g. from fireplaces, combustion processes or engine exhausts. The sampling probe (Ø 8 mm) can be directly connected to stacks and features a two-stage dilution system with integrated filter, dryer and activated ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Capable of measuring up to five different gases simultaneously, the 910 is a complete analysis system, with a sample extraction and transport designed for maintaining sample integrity. Delivering multi-component analytical performance that typically requires two or more separate analyzers, it provides a cost-effective ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The VCEM 5000/51000 represents the latest generation of CODEL’s unique flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the ...
-
Manufactured by Sintrol Oybased in FINLAND
The S305QAL stack emissions dust monitor meets the highest European standards as defined in EN14181. The S305QAL is approved for and is suitable for use on waste incineration and all combustion plant applications. The S305QAL1 comes with many key features making it a very reliable, low maintenance, sensitive and robust solution for ...
-
Manufactured by Dynoptic Systems Ltd - ACOEM Groupbased in UNITED KINGDOM
The DSL-330 Particulate Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in an exhaust gas passing through a duct, stack or flue. The DSL-330 uses the double pass light transmission measurement technique, with a folded beam Transceiver/Reflector arrangement. A light beam emitted ...
-
Manufactured by Dynoptic Systems Ltd - ACOEM Groupbased in UNITED KINGDOM
The DSL-460 Opacity Monitor is an optical instrument designed to measure the visual opacity and/or concentration of dust or particulate matter in an exhaust gas passing through a duct, stack or flue. The DSL-460 uses the double pass light transmission measurement technique, with a folded beam Transceiver/Reflector arrangement. A light beam ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you