Emissions Monitoring Equipment For Air And Climate In Peru
-
PremiumManufactured by ENVEAbased in FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
MCERTS QAL1 approved, stand alone or multi-sensor Particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in SRM paramagnetic sensor. The analyzer has been designed to meet ...
-
PremiumManufactured by ENVEAbased in FRANCE
Using a proven flame ionisation detector (FID), the analyzer HC51M measures ambient air hydrocarbons (THC, CH4, nmHC) in the range 0-1000 ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 TÜV approved particulate monitor providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852. The UT-3000 operates automatically. All functions are controlled by an embedded microprocessor. When measurements are carried out, all parameters and results are stored in the integrated data logger. With standard settings the data logger has a ...
-
PremiumManufactured by ENVEAbased in FRANCE
One single analyzer for the measurement of up to 50 parameters, to be selected according to the application. MCERTs certified. Based on the FTIR technology (Fourier Transform Infrared) for simultaneous measurement of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CH4, TOC, H2O, CO2, ...
-
PremiumManufactured by ENVEAbased in FRANCE
Standard Reference CLD method for low & ultra low NOx measurement, IR-GFC for CO, CO2, SO2, N2O, Nox, HF, HCl, TOC and O2 in a single analyzer. Fast and simultaneous measurements of up to 10 gases, available in 2 versions: NOx (CLD) and O2 (Paramagnetic) in 19’’ Rack or Tight box for low and ultra-low NOx monitoring. CO, CO2, SO2, HCl, HF, TOC, N2O (IR) + NOx (CLD) + O2 ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfectly adapted for continuous Air Quality monitoring, laboratories, environmental surveillance, quality control, etc. The VM-3000 Mercury Vapor Monitor measures continuously the Hg concentration in air and other gases. It is used for laboratory applications as well as installed at places where mercury has to be monitored. It is a great tool for many different fields of applications in ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME LEAK LOCATE 320 PLUS is a digitally networked, multi-compartment baghouse monitoring system providing remote observation of the condition of bag and cartridge filters. An ElectroDynamic™ sensor is installed in the outlet of each compartment to monitor dust emission levels. The network of sensors is connected to the PLUS Controller, which provides a large graphical user interface ...
-
PremiumManufactured by ENVEAbased in FRANCE
Provides continuous measurement values for dust concentration as a trend signal or absolute values. The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission ...
-
PremiumManufactured by ENVEAbased in FRANCE
Gas Sampling system for use in combination with low concentration analyzers (Ambient Air ...
-
Manufactured by ABB Measurement Productsbased in SWITZERLAND
The Endura AZ20 is the latest in a long line of high-quality, combustion gas analyzers from ABB. The in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions ...
-
by Pöyry PLCbased in FINLAND
We offer operation and maintenance services for energy production plants as well as industrial or municipal energy consumers. Pöyry has its own modern equipment for conducting these ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
Incineration of sewage sludge in cement factories is becoming a more and more interesting issue worldwide. Besides that municipalities can solve the disposal problem of dewatered or dried sewage sludge, cement factories offer a perfect match for the treatment necessities of sewage sludge. The dried sludge can be used as fuel and, depending on its contents, replace a significant part of costly ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
The C-Press is the latest result of more than 20 years of experience in designing and manufacturing screw presses. By combining multiple ANDRITZ SEPARATION dewatering technologies, its uniquely compact design and its purpose developed features enables easy, operator-free sludge dewatering together with low energy and maintenance ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
Municipal sludge drying and granulation using waste heat. The patented ANDRITZ AG belt drying system (BDS) is characterized by its flexibility and ability to use a wide range of energy sources, particularly low-grade waste energy. BDS can be used for drying a broad range of products, such as industrial and municipal sludge, cow manure, biomass, as well as pre-treated municipal solid ...
-
Manufactured by ABB Measurement Productsbased in SWITZERLAND
ABB is the world"s leading manufacturer in the field of continuous gas analysis and system solutions - formerly known as Hartmann & Braun. Our gas analyzers and system solutions are designed and manufactured exclusively in Frankfurt, Germany. More than 75 years of experience in continuous gas analysis are the basis for our innovative solutions. ABB"s continuous gas analysis represents the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you