Emissions Sampling Equipment For Air And Climate Available In Illinois
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Automatic Dioxin Sampling System GT90 Dioxin+ is a future-proof solution for a long-term sampling of dioxin emissions in conformity to the European standards EN1948-1 and EN15267. The system represents the cutting-edge technology for dioxin sampling and fulfills all the requirements of the dioxin measurement ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet Multipoint Sampling System (MSS) is designed for online monitoring of multiple measuring points. The Gasmet MSS consists of a wall-mounted stainless steel case which includes all valves, flow meters, and pump. Standard setup includes one pump with four (4) sample gas input line, but up to 32 lines can be added according to customer need. Additionally, a second sample gas pump can be added ...
-
PremiumManufactured by ENVEAbased in FRANCE
Biogenic or carbon-neutral stack CO2 gas can be deductible from any company’s greenhouse gas inventory which is required for reporting under various ...
-
PremiumManufactured by ENVEAbased in FRANCE
The HOFI BOX offers an exclusive sampling system dedicated to heated analyzers. Ideal for corrosive gases. (Plug & play sampling solution for: MIR FT, MIR 9000H, Graphite 52M, Topaze ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Quick and compliant. The FatExtractor E-500 is designed for quick and compliant fat extraction. Readily adapt your FatExtractor E-500 to changing needs with the interchangeable glass assembly and execute extractions according to Soxhlet, Randall or ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The 2812D is a very compact sample pump. It is made of 316 stainless steel to withstand the corrosive gasses as they can become present in a typical stack gas emission test. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation. The pump drive mechanism and motor have been designed for continuous, smooth and low vibration, silent and long lasting ...
-
PremiumManufactured by ENVEAbased in FRANCE
The dry extractive SEC system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed to meet almost all gas sample conditions. Ideal for highly soluble and corrosive gases. Optional built-in temperature & velocity sensors or STACKFLOW 200 flow meter on the same ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Method 7C (Colorimetric) and 7D (Ion Chromatography) are used for the determination of nitrogen oxide emissions. A sample is passed through a series of specially built impinger that contains an alkaline potassium permanganate solution. The impingers are of standard height with a narrow bottle, which improves the collection efficiency. The sample rate is between 400 and 500 cubic centimeters per ...
-
PremiumManufactured by ENVEAbased in FRANCE
MVS 2M is a multichannel system allowing to distribute two, three or four channels of fluids and signals to a gas monitoring system (GMS). Its function is to link the GMS with the sampling systems for gas and span gas, and to allow the redundancy ...
-
Manufactured by Aquaria Srlbased in ITALY
CF 20Basic HV is an ideal instrument for all the operators who request to a sampler to be extremely reliable, careful in measurement as well as handy and versatile in use. This instrument, connected to the most various accessories designed in compliance with the law in force regulations, can operate sampling of dust in the workplace, immissions and ...
-
Manufactured by P&P Optica Inc.based in CANADA
Laser Induced Breakdown Spectroscopy measures the atomic emission of samples. A laser pulse is used to generate a plasma burst from the sample. The atoms in the super heated plasma emit photons which are then analyzed with an optical spectrometer. LIBS measures mostly atomic emission lines, but the appearance of these lines is greatly affected by transient effects and the nature of the sample, so ...
-
Manufactured by CIC Photonicsbased in USA
Emission accessory. Mounts in sample compartments. Requires no instrument modification. Accommodates a variety of geometries. Usable to 400° C. Easy alignment. Reference documents ...
-
Manufactured by AMS Analiticabased in ITALY
An Inner cover ring for air-tight securing of sample does not interfere with sample loaded on filter and guarantees the filter stability inside the cassette. No sample loss or filters damages, with the new AMS filters transport cassettes. Manufactured in non static plastic material, the transport cassette are really easy approach and handling, reducing cost and reducing risk on sample stability ...
-
Manufactured by Kurz Instruments, Inc.based in USA
Kurz offers a complete isokinetic sampling system to ensure true sample composition — from stack flow monitoring and sample capture to sample flow control. The Kurz Emissions and Sampling System provides accurate sample collection for environmental, process, and nuclear applications. It eliminates under- or over-reporting gas or particulate constituents. A wet stack option is available. - ...
-
Manufactured by Neptech Inc.based in USA
Neptech Inc. is a manufacturer and custom engineering firm of electrically heated products used in emissions sampling today. Increased demand has paved the way for Neptech to become a major player in modulating control packages for Air Intake and Exhaust Back Pressure applications. Neptech can handle all applications ranging in sizes of 2”-18” and larger. We offer both butterfly style ...
-
Manufactured by TCR-Tecorabased in ITALY
Completely built in stainless steel Aisi 316. Compliance with ISO 10780. Terminal type “S” (not included) interchangeable with metal to metal joint. Thermocouple type K ...
-
Manufactured by Mechatest Sampling Solutionsbased in NETHERLANDS
Miniature Sampler 2, 10 and 20 ml sample volume! The GC Vial Liquid Sampler from Mechatest is simply the smallest and best solution to take samples specific for laboratory and chromatography applications. Direct from the process line, direct into the sample vial! This unique sampler have a reputation for reliable service and provides accurate samples of many chemical samples, solvent mixtures ...
-
Manufactured by TCR-Tecorabased in ITALY
Dividable isokinetic probes are the answer to the common problems of shipping, handling in reduced space area and storing of uncomfortably long probes. With a light weight and a high strong section, this probe allows an overhang up to 5 meter with reduced deflections. The testing head consists of a suction tube, an "S" Pitot tube, a gas analysis tip and a temperature measure probe. Through a ...
-
Manufactured by TCR-Tecorabased in ITALY
Kit to use the 47mm inox steel or titanium filterholder in the heated box. Using this kit, composed by two adapters, it’ possible to use the filterholder for 47mm flat membranes (see Emission Line 1.104.01) placing it in the heated box of the probe for micropollutants. The front connector fit to the outlet of the probe while the rear connector is equipped with a spherical joint fully ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you