Emissions Testing Equipment For Air And Climate In Peru
-
PremiumManufactured by ENVEAbased in FRANCE
The measurement result of the sensor is only as good as the reference to which it has been calibrated. For this reason we have developed the dosed-reference-method as an alternative to isokinetic dust sampling. The main basic idea of this is that a mass flow is dosed into the system which corresponds to a required concentration at a specific flow ...
-
PremiumManufactured by ENVEAbased in FRANCE
Provides continuous measurement values for dust concentration as a trend signal or absolute values. The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission ...
-
by Pöyry PLCbased in FINLAND
Whatever your project needs, we provide a full range of engineering services, ensuring that your project is delivered on scope, time, quality and ...
-
PremiumManufactured by ENVEAbased in FRANCE
The ProSens was specially developed to carry out reliable dust measurement on clean sides after ...
-
PremiumManufactured by ENVEAbased in FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
One of the sole QAL 1 certified FID analyzers on the market, also available in a transportable version for the measurement of: THC or simultaneous THC, nmHC & ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
Designed to store up to 80 litres of gas, the Rapidox Gas Recovery Bag allows for many hours of continuous, emission-free gas sampling before it requires emptying. Global environment legislation restricts the release of harmful gases into the atmosphere, however with the Rapidox Gas Recovery Bag users are able to safely capture and contain any emissions released within the testing ...
-
Manufactured by SAXON Junkalor GmbHbased in GERMANY
The Infralyt SMART was designed to perform the emissions test on vehicles. The device determines the gas components CO, CO2, HC as normal hexane via infrared absorption and O2 via the electro-chemical principle. With a simplification of “Brettschneider” formula, an air-fuel ratio is calculated, which decides on the stoichiometric quality of the combustion process from the exhaust gas. ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
Visual detection of packaging leaks through either bubble emissions, burst testing or altitude simulation testing. The LeakVIEW is an ideal seal integrity tester for a range of packaging within the food, consumer and medical device ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Movement of sample: For several reasons heat treatment sometimes needs to be combined with some sort of movement. Carbolite Gero offers a wide range of sample movements before, during and after heat treatment in standard and custom made ovens and furnaces. A continuous movement of fluids inside an oven can be achieved by upgrading a standard oven to be fitted with electric drives and a shaft. ...
-
Manufactured by SAXON Junkalor GmbHbased in GERMANY
EMISSION TESTER FOR COMBUSTION ENGINES The Infralyt N is used for fast, comprehensive analysis of diesel exhaust gases. With its own development of a special NDIR bench with high precision, the gases CO, CO2 and HC can be measured in the respective ranges. The integration of electrochemical cells for fast NO, NO2 and O2 measurement allows to take a statement to the actual pollutant level. Due to ...
-
Manufactured by Servomex - a Spectris Companybased in USA
High-performance analysis of total hydrocarbons (THC), methane (CH4) and non-methane hydrocarbons (NMHC). The SERVOPRO HFID heated total hydrocarbon analyzer utilizes a highly sensitive Flame Ionization Detector (FID) for measuring volatile hydrocarbon concentrations in vehicle/engine certification testing and industrial gas stack emissions monitoring applications. This ensures real-time, ...
-
Manufactured by Servomex - a Spectris Companybased in USA
Combustion and Ultra-Low NOx emissions testing and monitoring in one simple analyser using a Chemiluminescence Detector (CLD). The versatile SERVOPRO NOx gas analyzer uses the time-proven Chemiluminescence detection method to measure NO or NO/NO2/NOx concentrations all in one analyzer perfect for continuous monitoring for industrial stationary sources emissions or ambient air, and fast enough for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you