Engine Emissions Equipment For Air And Climate Available In British Columbia
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The MPB 20.55gh Trommel Screen is a deluxe screening workhorse that consistently and effectively separates a large volume of material even in unforgiving terrain. This robust machine boasts an 18ft long 6ft diameter drum with levelling system allowing it to work in uneven terrain. Use the levelling mechanism to create drum inclination to work with even more materials. Several industries benefit ...
-
PremiumManufactured by ENVEAbased in FRANCE
One of the sole QAL 1 certified FID analyzers on the market, also available in a transportable version for the measurement of: THC or simultaneous THC, nmHC & ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The new Dekati MPEC+ (Mobile Particle Emission Counter) is a compact and portable instrument for easy onboard PN-PEMS measurements. At the core of the MPEC+ is the patented Dekati ePNC particle counting technology, which has been further optimized for fast transient emission measurements. The MPEC+ is the device of choice for highly accurate PN-PEMS testing in accordance with RDE requirements. ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples without the need to cool the sample, which makes the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BA80H is a 3-inch mobile high head pump suitable for pumping slightly polluted fluids with solids up to 25 mm. The centrifugal pump is fitted with its own priming system and is therefore dry self-priming. A modern and economical diesel engine meets the highest emission standards for use worldwide. This high head pumpset can be used in a variety of applications such as tank cleaning, ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter is a portable dilution system that makes sample conditioning as easy as it can be. The Dekati eDiluter comes standard with a fixed 1:60 dilution factor, but it can as well be provided with a customer specific dilution factor in the range of 1:25-1:225. The Dekati eDiluter dilution parameters can be monitored on an integrated LCD display and a rotary controller knob allows the user ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by ENVEAbased in FRANCE
Exists in single or dual stream version and “Ultra Low” version for low CO concentration measurements (0-10 to 0-50 ppm) Installed downstream a chiller, controlled at ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling probe that enables particle sampling from up to 1200 °C. ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The VE 112 is an efficient, all heated, low pressure drop sample filter and interface for removing solids from a gaseous sample and supplying sample to up to 5 gas analyzers. It utilizes a permanent all stainless steel 2 micron mesh filter and all stainless steel valve in a thermostatically controlled oven to prevent the loss of high molecular weight hydrocarbons or condensation of water. The ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The FM50 is a multifunctional control module designed for use in gas compressor applications. It provides control for gas fuel, air/fuel ratio, and speed for gas engines, as well as monitoring and protection features. The FM50 can communicate with other control systems and devices using various protocols and interfaces, including Modbus, CANbus, and Ethernet. Its modular design allows for easy ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Engine Exhaust Diluter DEED is an engine exhaust conditioning system that fulfills all requirements and recommendations set forth by EURO 6 legislation for a VPR (Volatile Particle ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati Oxidation Flow Reactor, DOFR, is a unique, all-in-one solution combining sample conditioning and an oxidation flow reactor for secondary aerosol (SA) formation ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The PEMS-1000 portable On-board Emission Test System is a kind of portable analysis device used for real-time detection of vehicle engine exhaust, measuring related technical requirements for exhaust emission test of light-duty vehicles, heavy-duty vehicles and non-road machinery. The system, adopting integrated design to install on the measured vehicle, consists of gas measurement unit, exhaust ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you